[PATCH 0/3] Add CCI and CAMSS support for SM8750

[PATCH 0/3] Add CCI and CAMSS support for SM8750

[Hangxiang Ma]

This series adds CCI and CAMSS support for Qualcomm SM8750 SoC.

This series has been tested using the following commands with a downstream
driver for S5KJN5 sensor.
- media-ctl --reset
- media-ctl -V '"msm_csiphy2":0[fmt:SGBRG10/4096x3072]'
- media-ctl -V '"msm_csid0":0[fmt:SGBRG10/4096x3072]'
- media-ctl -V '"msm_vfe0_rdi0":0[fmt:SGBRG10/4096x3072]'
- media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
- media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
- yavta  --capture=20 -I -n 5 -f SGBRG10P -s 4096x3072 -F  /dev/video0

Driver and dt-binding are waiting to be merged:
https://lore.kernel.org/all/20260508-add-support-for-camss-on-sm8750-v3-0-fc6861a65c67@oss.qualcomm.com/

Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
---
Hangxiang Ma (3):
      arm64: dts: qcom: sm8750: Add camss node
      arm64: dts: qcom: sm8750: Add CCI definitions
      arm64: dts: qcom: sm8750: Add camera MCLK pinctrl

 arch/arm64/boot/dts/qcom/sm8750.dtsi | 541 +++++++++++++++++++++++++++++++++++
 1 file changed, 541 insertions(+)
---
base-commit: e9c9ed45e9870a5c221ff199fff1fb529f3f1691
change-id: 20260518-pakala-camera-bf03e3df1db8

Best regards,
-- 
Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>

[PATCH 1/3] arm64: dts: qcom: sm8750: Add camss node

[Hangxiang Ma]

Add node for the SM8750 camera subsystem.

Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750.dtsi | 203 +++++++++++++++++++++++++++++++++++
 1 file changed, 203 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 70830cb49e73..8ed3d8c791e3 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -3032,6 +3032,209 @@ videocc: clock-controller@aaf0000 {
 			#power-domain-cells = <1>;
 		};
 
+		camss: isp@ad27000 {
+			compatible = "qcom,sm8750-camss";
+
+			reg = <0x0 0x0ad27000 0x0 0x2b00>,
+			      <0x0 0x0ad2a000 0x0 0x2b00>,
+			      <0x0 0x0ad2d000 0x0 0x2b00>,
+			      <0x0 0x0ad6d000 0x0 0xa00>,
+			      <0x0 0x0ad72000 0x0 0xa00>,
+			      <0x0 0x0ada9000 0x0 0x2000>,
+			      <0x0 0x0adab000 0x0 0x2000>,
+			      <0x0 0x0adad000 0x0 0x2000>,
+			      <0x0 0x0adaf000 0x0 0x2000>,
+			      <0x0 0x0adb1000 0x0 0x2000>,
+			      <0x0 0x0adb3000 0x0 0x2000>,
+			      <0x0 0x0ad8b000 0x0 0x400>,
+			      <0x0 0x0ad8c000 0x0 0x400>,
+			      <0x0 0x0ad8d000 0x0 0x400>,
+			      <0x0 0x0ac86000 0x0 0x10000>,
+			      <0x0 0x0ac96000 0x0 0x10000>,
+			      <0x0 0x0aca6000 0x0 0x10000>,
+			      <0x0 0x0ad6e000 0x0 0x3000>,
+			      <0x0 0x0ad73000 0x0 0x3000>;
+			reg-names = "csid0",
+				    "csid1",
+				    "csid2",
+				    "csid_lite0",
+				    "csid_lite1",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "csiphy3",
+				    "csiphy4",
+				    "csiphy5",
+				    "csitpg0",
+				    "csitpg1",
+				    "csitpg2",
+				    "vfe0",
+				    "vfe1",
+				    "vfe2",
+				    "vfe_lite0",
+				    "vfe_lite1";
+
+			clocks = <&camcc CAM_CC_CAMNOC_NRT_AXI_CLK>,
+				 <&camcc CAM_CC_CAMNOC_RT_AXI_CLK>,
+				 <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+				 <&camcc CAM_CC_CAM_TOP_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_CAMNOC_RT_TFE_0_MAIN_CLK>,
+				 <&camcc CAM_CC_CAMNOC_RT_TFE_1_MAIN_CLK>,
+				 <&camcc CAM_CC_CAMNOC_RT_TFE_2_MAIN_CLK>,
+				 <&camcc CAM_CC_CAMNOC_RT_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_CSID_CLK>,
+				 <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY4_CLK>,
+				 <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY5_CLK>,
+				 <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>,
+				 <&camcc CAM_CC_TFE_0_MAIN_CLK>,
+				 <&camcc CAM_CC_TFE_0_MAIN_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_TFE_1_MAIN_CLK>,
+				 <&camcc CAM_CC_TFE_1_MAIN_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_TFE_2_MAIN_CLK>,
+				 <&camcc CAM_CC_TFE_2_MAIN_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+				 <&camcc CAM_CC_QDSS_DEBUG_XO_CLK>;
+			clock-names = "camnoc_nrt_axi",
+				      "camnoc_rt_axi",
+				      "cpas_ahb",
+				      "cpas_fast_ahb",
+				      "cpas_vfe0",
+				      "cpas_vfe1",
+				      "cpas_vfe2",
+				      "cpas_vfe_lite",
+				      "csid",
+				      "csid_csiphy_rx",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "csiphy4",
+				      "csiphy4_timer",
+				      "csiphy5",
+				      "csiphy5_timer",
+				      "gcc_axi_hf",
+				      "gcc_axi_sf",
+				      "vfe0",
+				      "vfe0_fast_ahb",
+				      "vfe1",
+				      "vfe1_fast_ahb",
+				      "vfe2",
+				      "vfe2_fast_ahb",
+				      "vfe_lite",
+				      "vfe_lite_ahb",
+				      "vfe_lite_cphy_rx",
+				      "vfe_lite_csid",
+				      "qdss_debug_xo";
+
+			interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 457 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid_lite0",
+					  "csid_lite1",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csiphy3",
+					  "csiphy4",
+					  "csiphy5",
+					  "vfe0",
+					  "vfe1",
+					  "vfe2",
+					  "vfe_lite0",
+					  "vfe_lite1";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&mmss_noc MASTER_CAMNOC_NRT_ICP_SF QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ahb",
+					     "hf_mnoc",
+					     "sf_mnoc",
+					     "sf_icp_mnoc";
+
+			iommus = <&apps_smmu 0x1c00 0x00>;
+
+			power-domains = <&camcc CAM_CC_TFE_0_GDSC>,
+					<&camcc CAM_CC_TFE_1_GDSC>,
+					<&camcc CAM_CC_TFE_2_GDSC>,
+					<&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "ife0",
+					     "ife1",
+					     "ife2",
+					     "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+
+				port@4 {
+					reg = <4>;
+				};
+
+				port@5 {
+					reg = <5>;
+				};
+			};
+
+		};
+
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sm8750-mdss";
 			reg = <0x0 0x0ae00000 0x0 0x1000>;

-- 
2.34.1

[PATCH 2/3] arm64: dts: qcom: sm8750: Add CCI definitions

[Hangxiang Ma]

Qualcomm SM8750 SoC has three Camera Control Interface (CCI). Each
controller contains two I2C hosts.

Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750.dtsi | 282 +++++++++++++++++++++++++++++++++++
 1 file changed, 282 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 8ed3d8c791e3..7570189fdb5d 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -3032,6 +3032,96 @@ videocc: clock-controller@aaf0000 {
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac7b000 {
+			compatible = "qcom,sm8750-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac7b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>;
+			clock-names = "ahb", "cci";
+			pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+			pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac7c000 {
+			compatible = "qcom,sm8750-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac7c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>;
+			clock-names = "ahb", "cci";
+			pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+			pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci2: cci@ac7d000 {
+			compatible = "qcom,sm8750-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac7d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_2_CLK>;
+			clock-names = "ahb", "cci";
+			pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+			pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci2_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci2_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camss: isp@ad27000 {
 			compatible = "qcom,sm8750-camss";
 
@@ -3804,6 +3894,198 @@ tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 216>;
 			wakeup-parent = <&pdc>;
 
+			cci0_0_default: cci0-0-default-state {
+				sda-pins {
+					pins = "gpio113";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				scl-pins {
+					pins = "gpio114";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci0_0_sleep: cci0-0-sleep-state {
+				sda-pins {
+					pins = "gpio113";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio114";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci0_1_default: cci0-1-default-state {
+				sda-pins {
+					pins = "gpio115";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				scl-pins {
+					pins = "gpio116";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci0_1_sleep: cci0-1-sleep-state {
+				sda-pins {
+					pins = "gpio115";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio116";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_0_default: cci1-0-default-state {
+				sda-pins {
+					pins = "gpio117";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				scl-pins {
+					pins = "gpio118";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci1_0_sleep: cci1-0-sleep-state {
+				sda-pins {
+					pins = "gpio117";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio118";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_1_default: cci1-1-default-state {
+				sda-pins {
+					pins = "gpio111";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				scl-pins {
+					pins = "gpio164";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci1_1_sleep: cci1-1-sleep-state {
+				sda-pins {
+					pins = "gpio111";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio164";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_0_default: cci2-0-default-state {
+				sda-pins {
+					pins = "gpio112";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				scl-pins {
+					pins = "gpio153";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci2_0_sleep: cci2-0-sleep-state {
+				sda-pins {
+					pins = "gpio112";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio153";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_1_default: cci2-1-default-state {
+				sda-pins {
+					pins = "gpio119";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				scl-pins {
+					pins = "gpio120";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci2_1_sleep: cci2-1-sleep-state {
+				sda-pins {
+					pins = "gpio119";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio120";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
 			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
 				/* SDA, SCL */
 				pins = "gpio64", "gpio65";

-- 
2.34.1

[PATCH 3/3] arm64: dts: qcom: sm8750: Add camera MCLK pinctrl

[Hangxiang Ma]

Define pinctrl definitions to enable camera master clocks on SM8750.

Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8750.dtsi | 56 ++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 7570189fdb5d..84ab550db2f4 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -3894,6 +3894,62 @@ tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 216>;
 			wakeup-parent = <&pdc>;
 
+			cam0_default: cam0-default-state {
+				pins = "gpio89";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam1_default: cam1-default-state {
+				pins = "gpio90";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam2_default: cam2-default-state {
+				pins = "gpio91";
+				function = "cam_asc_mclk2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam3_default: cam3-default-state {
+				pins = "gpio92";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam4_default: cam4-default-state {
+				pins = "gpio93";
+				function = "cam_asc_mclk4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam5_default: cam5-default-state {
+				pins = "gpio94";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam6_default: cam6-default-state {
+				pins = "gpio95";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam7_default: cam7-default-state {
+				pins = "gpio96";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			cci0_0_default: cci0-0-default-state {
 				sda-pins {
 					pins = "gpio113";

-- 
2.34.1

Re: [PATCH 3/3] arm64: dts: qcom: sm8750: Add camera MCLK pinctrl

[Konrad Dybcio]

On 5/19/26 9:17 AM, Hangxiang Ma wrote:
> Define pinctrl definitions to enable camera master clocks on SM8750.
> 
> Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad