[PATCH 0/2] arm64: add support for Olimex i.MX8MP-SOM-EVB kit

[PATCH 0/2] arm64: add support for Olimex i.MX8MP-SOM-EVB kit

[Zoltan HERPAI]

This series adds support for the Olimex i.MX8MP-SOM-EVB kit, consisting of a carrier
board and a SoM.

Patch 1/2 documents the respective bindings,
Patch 2/2 adds the SoM dtsi and the carrier board dts.

Zoltan HERPAI (2):
  dt-bindings: arm64: fsl: add Olimex i.MX8MP boards
  arm64: dts: imx8mp: add Olimex i.MX8MP-SOM-EVB kit

 .../devicetree/bindings/arm/fsl.yaml          |   7 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mp-olimex-som-evb.dts   | 168 +++++
 .../boot/dts/freescale/imx8mp-olimex-som.dtsi | 578 ++++++++++++++++++
 4 files changed, 754 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-olimex-som-evb.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-olimex-som.dtsi

-- 
2.30.2

[PATCH 1/2] dt-bindings: arm64: fsl: add Olimex i.MX8MP boards

[Zoltan HERPAI]

Document board compatible bindings for the Olimex i.MX8MP-SOM and
-EVB boards.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 656f2596e..aef153222 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1146,6 +1146,8 @@ properties:
               - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
               - gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board
               - gateworks,imx8mp-gw82xx-2x # i.MX8MP Gateworks Board
+              - olimex,imx8mp-som      # Olimex i.MX8MP-SOM
+              - olimex,imx8mp-som-evb  # Olimex i.MX8MP-SOM-EVB
               - prt,prt8ml             # Protonic PRT8ML
               - skov,imx8mp-skov-basic # SKOV i.MX8MP baseboard without frontplate
               - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel
@@ -1225,6 +1227,11 @@ properties:
           - const: kontron,imx8mp-osm-s               # Kontron i.MX8MP OSM-S SoM
           - const: fsl,imx8mp
 
+      - description: Olimex i.MX8MP boards
+        items:
+          - const: olimex,imx8mp-som     # Olimex i.MX8MP-SOM
+          - const: olimex,imx8mp-som-evb # Olimex i.MX8MP-SOM-EVB
+
       - description: PHYTEC phyCORE-i.MX8MP FPSC based boards
         items:
           - enum:
-- 
2.39.5

Re: [PATCH 1/2] dt-bindings: arm64: fsl: add Olimex i.MX8MP boards

[Krzysztof Kozlowski]

On 18/09/2026 21:55, Zoltan HERPAI wrote:
> Document board compatible bindings for the Olimex i.MX8MP-SOM and
> -EVB boards.
> 
> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 656f2596e..aef153222 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -1146,6 +1146,8 @@ properties:
>                - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
>                - gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board
>                - gateworks,imx8mp-gw82xx-2x # i.MX8MP Gateworks Board
> +              - olimex,imx8mp-som      # Olimex i.MX8MP-SOM
> +              - olimex,imx8mp-som-evb  # Olimex i.MX8MP-SOM-EVB

How som can be used alone?

>                - prt,prt8ml             # Protonic PRT8ML
>                - skov,imx8mp-skov-basic # SKOV i.MX8MP baseboard without frontplate
>                - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel
> @@ -1225,6 +1227,11 @@ properties:
>            - const: kontron,imx8mp-osm-s               # Kontron i.MX8MP OSM-S SoM
>            - const: fsl,imx8mp
>  
> +      - description: Olimex i.MX8MP boards
> +        items:
> +          - const: olimex,imx8mp-som     # Olimex i.MX8MP-SOM
> +          - const: olimex,imx8mp-som-evb # Olimex i.MX8MP-SOM-EVB

This makes no sense. Why duplicated? And where is fallback? Why are you
doing it completely different than everybody else?


Best regards,
Krzysztof

[PATCH 2/2] arm64: dts: imx8mp: add Olimex i.MX8MP-SOM-EVB kit

[Zoltan HERPAI]

This adds support for an i.MX8-based system-on-module + EVB board. The
product pages are here [1] and here [2] respectively.

There are two new files, one dts for the EVB and one dtsi for the SoM.

EVB features:
 - microSD slot, eMMC headers
 - 2x Ethernet 1Gb
 - 2x USB 3.0
 - 1x m.2 PCIe slot
 - 2x CAN interface
 - audio (2x jacks via ES8328)
 - at24 eeprom
 - separate UARTs for the A53 and the M7 cores
 - HDMI
 - UEXT and GPIO connectors with I2C available

SoM features:
 - NXP i.MX8MP @ 1600MHz
 - 4GByte memory
 - LVDS interface
 - 2x MIPI_CSI, 1x MIPI_DSI
 - status LED

[1] https://www.olimex.com/Products/SOM/NXP-iMX8/iMX8MP-SOM-4GB-IND
[2] https://www.olimex.com/Products/SOM/NXP-iMX8/iMX8MP-SOM-EVB-IND

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mp-olimex-som-evb.dts   | 137 +++++
 .../boot/dts/freescale/imx8mp-olimex-som.dtsi | 571 ++++++++++++++++++
 3 files changed, 709 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-olimex-som-evb.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-olimex-som.dtsi

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 95ae85ab4..3657e3464 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -447,6 +447,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-enc-carrier-board.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-smarc-universal-board.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-olimex-som-evb.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
 imx8mp-phyboard-pollux-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \
 	imx8mp-phyboard-pollux-etml1010g3dra.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-olimex-som-evb.dts b/arch/arm64/boot/dts/freescale/imx8mp-olimex-som-evb.dts
new file mode 100644
index 000000000..26fee72d5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-olimex-som-evb.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright 2026 Zoltan HERPAI <wigyori@uid0.hu>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-olimex-som.dtsi"
+
+/ {
+	compatible = "olimex,imx8mp-som-evb", "fsl,imx8mp";
+	model = "Olimex i.MX8MP-SOM-EVB";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+
+	status = "okay";
+
+	spidev1: spi@0 {
+		reg = <0>;
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <500000>;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1800>;
+	fsl,phy-tx-vref-tune-percent = <122>;
+
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb1_host_vbus>;
+	fsl,phy-tx-preemp-amp-tune-microamp = <1800>;
+	fsl,phy-tx-vref-tune-percent = <116>;
+
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2csgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40000
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX		0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX		0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154
+		>;
+	};
+
+	pinctrl_flexcan1_reg: flexcan1reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x154	/* CAN1_STBY */
+		>;
+	};
+
+	pinctrl_flexcan2_reg: flexcan2reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x154	/* CAN2_STBY */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-olimex-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-olimex-som.dtsi
new file mode 100644
index 000000000..9876d3e7b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-olimex-som.dtsi
@@ -0,0 +1,571 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright 2026 Zoltan HERPAI <wigyori@uid0.hu>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mp.dtsi"
+
+/ {
+	compatible = "olimex,imx8mp-som", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led_status: status {
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0x40000000>;
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie0_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb1_host_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_host_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_vbus>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			eee-broken-100tx;
+			eee-broken-1000t;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <150000>;
+			reset-deassert-us = <10000>;
+
+			reg = <3>;
+		};
+	};
+};
+
+&fec {
+	fsl,magic-packet;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <150000>;
+			reset-deassert-us = <10000>;
+
+			reg = <7>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+
+	status = "okay";
+
+	pmic: pmic@25 {
+		reg = <0x25>;
+		compatible = "nxp,pca9450c";
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie0>;
+
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+
+	status = "okay";
+};
+
+&sdma2 {
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+
+	status = "okay";
+};
+
+&uart3 {
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+
+	status = "okay";
+};
+
+&wdog1 {
+	fsl,ext-reset-output;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000019
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x40000019
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x19
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x19
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x61 /* open drain, pull up */
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07	0x41 /* PCIE_RESET */
+		>;
+	};
+
+	pinctrl_pcie0_reg: pcie0reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x140
+			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x140
+		>;
+	};
+
+	pinctrl_usb1_vbus: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x19
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_usb1_vbus: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x19
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
-- 
2.39.5

Re: [PATCH 2/2] arm64: dts: imx8mp: add Olimex i.MX8MP-SOM-EVB kit

[Krzysztof Kozlowski]

On 18/09/2026 21:55, Zoltan HERPAI wrote:
> This adds support for an i.MX8-based system-on-module + EVB board. The

Please do not use "This commit/patch/change", but imperative mood. See
longer explanation here:
https://elixir.bootlin.com/linux/v6.16/source/Documentation/process/submitting-patches.rst#L94

> product pages are here [1] and here [2] respectively.
> 
> There are two new files, one dts for the EVB and one dtsi for the SoM.
> 


...


> +&ecspi2 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
> +
> +	status = "okay";
> +
> +	spidev1: spi@0 {
> +		reg = <0>;
> +		compatible = "rohm,dh2228fv";

No, strong no. This does not exist. Don't invent fake devices on your board.


Best regards,
Krzysztof