Re: [PATCH net v4 0/4] net: phy: bcm54811: Fix the PHY initialization

[Florian Fainelli <florian.fainelli@broadcom.com>]

On 6/30/25 06:58, Kamil Horák - 2N wrote:
> PATCH 1 - Add MII-Lite PHY interface mode as defined by Broadcom for
>     their two-wire PHYs. It can be used with most Ethernet controllers
>     under certain limitations (no half-duplex link modes etc.).
> 
> PATCH 2 - Add MII-Lite PHY interface type
> 
> PATCH 3 - Activation of MII-Lite interface mode on Broadcom bcm5481x
>     PHYs
> 
> PATCH 4 - Fix the BCM54811 PHY initialization so that it conforms
>     to the datasheet regarding a reserved bit in the LRE Control
>     register, which must be written to zero after every device reset.
>     Also fix the LRE Status register reading, there is another bit to
>     be ignored on bcm54811.
> 
> Changes in v2:
>    - Applied reviewers' comments
>    - Divided into more patches (separated common and Broadcom
>     PHY specific code)
> 
> Changes in v3:
>    - Added MII-Lite documentation
> 
> Changes in v4:
>    - Added missing Fixes headers

Kamil, you posted your v4 less than 24 hrs after the v3, please don't do 
that per:

https://www.kernel.org/doc/html/next/process/maintainer-netdev.html#updating-patch-status
-- 
Florian