Re: [PATCH v2 7/9] drm/rockchip: vop2: Find the first mixer of a video port with Esmart3 too

[Damon Ding <damon.ding@rock-chips.com>]

On 11/12/2026 4:33 PM, Arun Iyengar via B4 Relay wrote:
> From: Arun Iyengar <aiyengar1990@gmail.com>
> 
> vop2_find_start_mixer_id_for_vp() looks for the first layer that holds a
> window of the video port, but for_each_set_bit() takes the number of bits
> to search, and ROCKCHIP_VOP2_ESMART3 is the highest window id, so Esmart3
> is never found. A video port whose bottom layer shows Esmart3 then starts
> its alpha setup at the mixer of a higher layer, or, if Esmart3 is its
> only window, past all layers, and programs mixers of other video ports.
> 
> Add ROCKCHIP_VOP2_MAX_LAYER_ID after the last window id and search up to
> it.
> 
> Fixes: d3fe9aa49585 ("drm/rockchip: vop2: Use OVL_LAYER_SEL configuration instead of use win_mask calculate used layers")
> Signed-off-by: Arun Iyengar <aiyengar1990@gmail.com>
> ---
>   drivers/gpu/drm/rockchip/rockchip_drm_vop2.h | 1 +
>   drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 2 +-
>   2 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
> index ccbfbdb8d246..290990632388 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
> @@ -857,6 +857,7 @@ enum vop2_layer_phy_id {
>   	ROCKCHIP_VOP2_CLUSTER3,
>   	ROCKCHIP_VOP2_ESMART2,
>   	ROCKCHIP_VOP2_ESMART3,
> +	ROCKCHIP_VOP2_MAX_LAYER_ID,
>   	ROCKCHIP_VOP2_PHY_ID_INVALID = -1,
>   };
>   
> diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
> index 83203d18865b..088c1f3a972f 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
> @@ -1889,7 +1889,7 @@ static int vop2_find_start_mixer_id_for_vp(struct vop2_video_port *vp)
>   
>   	for (i = 0; i < 31; i += 4) {
>   		match = false;
> -		for_each_set_bit(phys_id, &win_mask, ROCKCHIP_VOP2_ESMART3) {
> +		for_each_set_bit(phys_id, &win_mask, ROCKCHIP_VOP2_MAX_LAYER_ID) {
>   			win = vop2_find_win_by_phys_id(vop2, phys_id);
>   			if (win->data->layer_sel_id[vp->id] == ((layer_sel >> i) & 0xf)) {
>   				match = true;
> 

Reviewed-by: Damon Ding <damon.ding@rock-chips.com>

Best regards,
Damon