mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
To: Val Packett <val@packett.cool>, Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>,
	Wesley Cheng <wesley.cheng@oss.qualcomm.com>,
	Neil Armstrong <neil.armstrong@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
	linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] phy: qcom: qmp-combo: Move pipe_clk on/off to common
Date: Wed, 4 Mar 2026 13:19:04 +0100	[thread overview]
Message-ID: <0a703589-48cc-4717-a629-4424ff55b7bf@oss.qualcomm.com> (raw)
In-Reply-To: <20260228220634.22778-2-val@packett.cool>

On 2/28/26 11:05 PM, Val Packett wrote:
> Keep the USB pipe clock working when the phy is in DP-only mode, because
> the dwc controller still needs it for USB 2.0 over the same Type-C port.
> 
> Tested with the BenQ RD280UA monitor which has a downstream-facing port
> for data passthrough that's manually switchable between USB 2 and 3,
> corresponding to 4-lane and 2-lane DP respectively.
> 
> Note: the suspend/resume callbacks were already gating the enable/disable
> of this clock only on init_count and not usb_init_count!
> 
> Signed-off-by: Val Packett <val@packett.cool>
> ---
> See https://lore.kernel.org/all/389ca5d3-a698-4dac-911c-39ba057e3d17@oss.qualcomm.com/ for more info.
> BTW https://lore.kernel.org/all/20260205160240.748371-2-loic.poulain@oss.qualcomm.com/ helped with coldplug.
> 
> v2: Reorder disables as suggested
> v1: https://lore.kernel.org/all/20250927093915.45124-2-val@packett.cool/
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 93f1aa10d400..28428a8d1192 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -3691,6 +3691,13 @@ static int qmp_combo_com_init(struct qmp_combo *qmp, bool force)
>  	if (ret)
>  		goto err_assert_reset;
>  
> +	/* In DP-only mode, the pipe clk is still required for USB2 */
> +	ret = clk_prepare_enable(qmp->pipe_clk);
> +	if (ret) {
> +		dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
> +		return ret;

I didn't notice this before - please add this hunk

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 28428a8d1192..cdcfad2e86b1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -3695,7 +3695,7 @@ static int qmp_combo_com_init(struct qmp_combo *qmp, bool force)
        ret = clk_prepare_enable(qmp->pipe_clk);
        if (ret) {
                dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
-               return ret;
+               goto err_disable_clocks;
        }
 
        qphy_setbits(com, QPHY_V3_DP_COM_POWER_DOWN_CTRL, SW_PWRDN);
@@ -3756,6 +3756,8 @@ static int qmp_combo_com_init(struct qmp_combo *qmp, bool force)
 
        return 0;
 
+err_disable_clocks:
+       clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks);
 err_assert_reset:
        reset_control_bulk_assert(cfg->num_resets, qmp->resets);
 err_disable_regulators:

Konrad

      parent reply	other threads:[~2026-03-04 12:19 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-28 22:05 Val Packett
2026-03-02  9:45 ` Neil Armstrong
2026-03-03 11:31 ` Konrad Dybcio
2026-03-04 12:19 ` Konrad Dybcio [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0a703589-48cc-4717-a629-4424ff55b7bf@oss.qualcomm.com \
    --to=konrad.dybcio@oss.qualcomm.com \
    --cc=bjorn.andersson@oss.qualcomm.com \
    --cc=dmitry.baryshkov@oss.qualcomm.com \
    --cc=kishon@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=neil.armstrong@linaro.org \
    --cc=val@packett.cool \
    --cc=vkoul@kernel.org \
    --cc=wesley.cheng@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®