[PATCH 0/2] mvebu-mbus: Adjustments for mvebu_devs_debug_show()

[PATCH 0/2] mvebu-mbus: Adjustments for mvebu_devs_debug_show()

[SF Markus Elfring]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Fri, 12 Jan 2018 17:47:57 +0100

Two update suggestions were taken into account
from static source code analysis.

Markus Elfring (2):
  Use seq_putc()
  Fix a typo in five comment lines

 drivers/bus/mvebu-mbus.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

-- 
2.15.1

[PATCH 1/2] mvebu-mbus: Use seq_putc() in mvebu_devs_debug_show()

[SF Markus Elfring]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Fri, 12 Jan 2018 17:12:14 +0100

A single character (line break) should be put into a sequence.
Thus use the corresponding function "seq_putc".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/bus/mvebu-mbus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index 70db4d5638a6..5844901aea0b 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -514,7 +514,7 @@ static int mvebu_devs_debug_show(struct seq_file *seq, void *v)
 			seq_printf(seq, " (remap %016llx)\n",
 				   (unsigned long long)wremap);
 		} else
-			seq_printf(seq, "\n");
+			seq_putc(seq, '\n');
 	}
 
 	return 0;
-- 
2.15.1

[PATCH 2/2] mvebu-mbus: Fix a typo in five comment lines

[SF Markus Elfring]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Fri, 12 Jan 2018 17:44:48 +0100

Adjust words in these descriptions.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/bus/mvebu-mbus.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index 5844901aea0b..e0c1b07108a6 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -23,15 +23,14 @@
  *
  * This driver:
  *
- * - Reads out the SDRAM address decoding windows at initialization
- *   time, and fills the mvebu_mbus_dram_info structure with these
- *   informations. The exported function mv_mbus_dram_info() allow
- *   device drivers to get those informations related to the SDRAM
- *   address decoding windows. This is because devices also have their
- *   own windows (configured through registers that are part of each
- *   device register space), and therefore the drivers for Marvell
- *   devices have to configure those device -> SDRAM windows to ensure
- *   that DMA works properly.
+ * - Reads out the SDRAM address decoding windows at initialization time,
+ *   and fills the mvebu_mbus_dram_info structure with this information.
+ *   The exported function mv_mbus_dram_info() allows device drivers to get
+ *   this information related to the SDRAM address decoding windows.
+ *   This is because devices also have their own windows (configured through
+ *   registers that are part of each device register space), and therefore
+ *   the drivers for Marvell devices have to configure those device
+ *   -> SDRAM windows to ensure that DMA works properly.
  *
  * - Provides an API for platform code or device drivers to
  *   dynamically add or remove address decoding windows for the CPU ->
@@ -123,7 +122,7 @@ struct mvebu_mbus_soc_data {
 };
 
 /*
- * Used to store the state of one MBus window accross suspend/resume.
+ * Used to store the state of one MBus window across suspend/resume.
  */
 struct mvebu_mbus_win_data {
 	u32 ctrl;
-- 
2.15.1