From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
To: Fenglin Wu <fenglin.wu@oss.qualcomm.com>,
kernel@oss.qualcomm.com, Lee Jones <lee@kernel.org>,
Pavel Machek <pavel@kernel.org>,
Fenglin Wu <quic_fenglinw@quicinc.com>
Cc: Subbaraman Narayanamurthy
<subbaraman.narayanamurthy@oss.qualcomm.com>,
linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] leds: flash: leds-qcom-flash: update torch current clamp setting
Date: Mon, 28 Jul 2025 11:18:20 +0200 [thread overview]
Message-ID: <0d99a9e8-5ad6-4826-9fb7-753724dc53ad@oss.qualcomm.com> (raw)
In-Reply-To: <f4f46e92-3d49-4bcf-a23e-223c758f56e9@oss.qualcomm.com>
On 7/28/25 4:27 AM, Fenglin Wu wrote:
>
> On 7/25/2025 8:37 PM, Konrad Dybcio wrote:
>> On 7/25/25 12:04 PM, 'Fenglin Wu via B4 Relay' via kernel wrote:
>>> From: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
>>>
>>> There is a register to clamp the flash current per LED channel when
>>> safety timer is disabled. It needs to be updated according to the
>>> maximum torch LED current setting to ensure the torch current won't
>>> be clamped unexpectedly.
>>>
>>> Fixes: 96a2e242a5dc ("leds: flash: Add driver to support flash LED module in QCOM PMICs")
>>> Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
>>> ---
>>> drivers/leds/flash/leds-qcom-flash.c | 16 +++++++++++++---
>>> 1 file changed, 13 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/leds/flash/leds-qcom-flash.c b/drivers/leds/flash/leds-qcom-flash.c
>>> index 89cf5120f5d55bbb7e24faa8c3a946416f8fed46..9c2e41cfddcf2d50d5a633cb157084371a631d74 100644
>>> --- a/drivers/leds/flash/leds-qcom-flash.c
>>> +++ b/drivers/leds/flash/leds-qcom-flash.c
>>> @@ -1,6 +1,6 @@
>>> // SPDX-License-Identifier: GPL-2.0-only
>>> /*
>>> - * Copyright (c) 2022, 2024 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + * Copyright (c) 2022, 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
>>> */
>>> #include <linux/bitfield.h>
>>> @@ -111,6 +111,7 @@ enum {
>>> REG_IRESOLUTION,
>>> REG_CHAN_STROBE,
>>> REG_CHAN_EN,
>>> + REG_TORCH_CLAMP,
>> This is not the name of this register on at least PM8150L
> The register is referred to as 'TIMER_DISA_MITIGATION_CLAMP' in the documentation. 'TIMER_DISA' indicates the flash module operating in torch mode. We can remove 'MITIGATION' to create a shorter name for the enum.>>
>>> REG_THERM_THRSH1,
>>> REG_THERM_THRSH2,
>>> REG_THERM_THRSH3,
>>> @@ -127,6 +128,7 @@ static const struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = {
>>> REG_FIELD(0x47, 0, 5), /* iresolution */
>>> REG_FIELD_ID(0x49, 0, 2, 3, 1), /* chan_strobe */
>>> REG_FIELD(0x4c, 0, 2), /* chan_en */
>>> + REG_FIELD(0xec, 0, 6), /* torch_clamp */
>> Please keep it sorted by address
> I need to keep the 'therm_thrsh1/2/3' register fields at the end of this array because 'mvflash_4ch_regs' doesn't include a 'therm_thrsh3' register. Placing the 'therm_thrshx' registers in the middle would require creating a placeholder, which I couldn't figure out how to do effectively. Do you have any suggestions?
Designated initializers (i.e. [REG_CHAN_EN] = REG_FIELD(...),)
Konrad
next prev parent reply other threads:[~2025-07-28 9:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-25 10:04 [PATCH 0/2] " Fenglin Wu via B4 Relay
2025-07-25 10:04 ` [PATCH 1/2] " Fenglin Wu via B4 Relay
2025-07-25 12:37 ` Konrad Dybcio
2025-07-25 12:45 ` Konrad Dybcio
2025-07-28 2:27 ` Fenglin Wu
2025-07-28 9:18 ` Konrad Dybcio [this message]
2025-07-25 10:04 ` [PATCH 2/2] leds: flash: leds-qcom-flash: add a separate register map for PMI8998 Fenglin Wu via B4 Relay
2025-07-25 12:42 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0d99a9e8-5ad6-4826-9fb7-753724dc53ad@oss.qualcomm.com \
--to=konrad.dybcio@oss.qualcomm.com \
--cc=fenglin.wu@oss.qualcomm.com \
--cc=kernel@oss.qualcomm.com \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@kernel.org \
--cc=quic_fenglinw@quicinc.com \
--cc=subbaraman.narayanamurthy@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®