* [PATCH] arm64: dts: qcom: Add Display Port audio on Arduino Monza
@ 2026-05-22 10:00 Srinivas Kandagatla
2026-05-22 15:30 ` Loic Poulain
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Srinivas Kandagatla @ 2026-05-22 10:00 UTC (permalink / raw)
To: andersson
Cc: konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree,
linux-kernel, Srinivas Kandagatla, Loic Poulain
Add support for Display port Audio on Arduino VENTUNO-Q board.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
CC: Loic Poulain <loic.poulain@oss.qualcomm.com>
---
alsa tplg changes are:
https://github.com/linux-msm/audioreach-topology/pull/63
Ucm changes are:
https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/ventuno-q
.../arm64/boot/dts/qcom/monaco-arduino-monza.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
index ca14f0ea4dae..01acc8363cbb 100644
--- a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
+++ b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
@@ -117,6 +117,22 @@ platform {
sound-dai = <&q6apm>;
};
};
+
+ displayport-0-dai-link {
+ link-name = "DisplayPort0 Playback";
+
+ codec {
+ sound-dai = <&mdss_dp0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai DISPLAY_PORT_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
};
vdc_3v3: regulator-3v3 {
--
2.47.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: dts: qcom: Add Display Port audio on Arduino Monza
2026-05-22 10:00 [PATCH] arm64: dts: qcom: Add Display Port audio on Arduino Monza Srinivas Kandagatla
@ 2026-05-22 15:30 ` Loic Poulain
2026-05-25 13:22 ` Konrad Dybcio
2026-07-05 20:58 ` Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Loic Poulain @ 2026-05-22 15:30 UTC (permalink / raw)
To: Srinivas Kandagatla
Cc: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm,
devicetree, linux-kernel
On Fri, May 22, 2026 at 12:00 PM Srinivas Kandagatla
<srinivas.kandagatla@oss.qualcomm.com> wrote:
>
> Add support for Display port Audio on Arduino VENTUNO-Q board.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
> CC: Loic Poulain <loic.poulain@oss.qualcomm.com>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
> ---
> alsa tplg changes are:
> https://github.com/linux-msm/audioreach-topology/pull/63
> Ucm changes are:
> https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/ventuno-q
>
>
> .../arm64/boot/dts/qcom/monaco-arduino-monza.dts | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
> index ca14f0ea4dae..01acc8363cbb 100644
> --- a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
> +++ b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
> @@ -117,6 +117,22 @@ platform {
> sound-dai = <&q6apm>;
> };
> };
> +
> + displayport-0-dai-link {
> + link-name = "DisplayPort0 Playback";
> +
> + codec {
> + sound-dai = <&mdss_dp0>;
> + };
> +
> + cpu {
> + sound-dai = <&q6apmbedai DISPLAY_PORT_RX_0>;
> + };
> +
> + platform {
> + sound-dai = <&q6apm>;
> + };
> + };
> };
>
> vdc_3v3: regulator-3v3 {
> --
> 2.47.3
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: dts: qcom: Add Display Port audio on Arduino Monza
2026-05-22 10:00 [PATCH] arm64: dts: qcom: Add Display Port audio on Arduino Monza Srinivas Kandagatla
2026-05-22 15:30 ` Loic Poulain
@ 2026-05-25 13:22 ` Konrad Dybcio
2026-07-05 20:58 ` Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Konrad Dybcio @ 2026-05-25 13:22 UTC (permalink / raw)
To: Srinivas Kandagatla, andersson
Cc: konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree,
linux-kernel, Loic Poulain
On 5/22/26 12:00 PM, Srinivas Kandagatla wrote:
> Add support for Display port Audio on Arduino VENTUNO-Q board.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
> CC: Loic Poulain <loic.poulain@oss.qualcomm.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Konrad
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: dts: qcom: Add Display Port audio on Arduino Monza
2026-05-22 10:00 [PATCH] arm64: dts: qcom: Add Display Port audio on Arduino Monza Srinivas Kandagatla
2026-05-22 15:30 ` Loic Poulain
2026-05-25 13:22 ` Konrad Dybcio
@ 2026-07-05 20:58 ` Bjorn Andersson
2 siblings, 0 replies; 4+ messages in thread
From: Bjorn Andersson @ 2026-07-05 20:58 UTC (permalink / raw)
To: Srinivas Kandagatla
Cc: konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm, devicetree,
linux-kernel, Loic Poulain
On Fri, 22 May 2026 10:00:26 +0000, Srinivas Kandagatla wrote:
> Add support for Display port Audio on Arduino VENTUNO-Q board.
>
>
Applied, thanks!
[1/1] arm64: dts: qcom: Add Display Port audio on Arduino Monza
commit: f9665fc0681c1a0edc03be9900ba3f318fe3c5bd
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2026-07-05 20:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-05-22 10:00 [PATCH] arm64: dts: qcom: Add Display Port audio on Arduino Monza Srinivas Kandagatla
2026-05-22 15:30 ` Loic Poulain
2026-05-25 13:22 ` Konrad Dybcio
2026-07-05 20:58 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®