[PATCH 0/2] ARM: dts: microchip: few DT cleanups

mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed

* [PATCH 0/2] ARM: dts: microchip: few DT cleanups
@ 2024-02-18 15:13 Claudiu Beznea
  2024-02-18 15:13 ` [PATCH 1/2] ARM: dts: microchip: sama7g5: align dmas to the opening '<' Claudiu Beznea
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Claudiu Beznea @ 2024-02-18 15:13 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, conor+dt, nicolas.ferre,
	alexandre.belloni
  Cc: devicetree, linux-kernel, linux-arm-kernel, Claudiu Beznea

Hi,

Series adds minor cleanups for sam9x60 and sama7g5.

Thank you,
Claudiu Beznea

Claudiu Beznea (2):
  ARM: dts: microchip: sama7g5: align dmas to opening '<'
  ARM: dts: microchip: sam9x60: align dmas to opening '<'

 arch/arm/boot/dts/microchip/sam9x60.dtsi | 64 ++++++++++++------------
 arch/arm/boot/dts/microchip/sama7g5.dtsi | 16 +++---
 2 files changed, 40 insertions(+), 40 deletions(-)

-- 
2.39.2


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 1/2] ARM: dts: microchip: sama7g5: align dmas to the opening '<'
  2024-02-18 15:13 [PATCH 0/2] ARM: dts: microchip: few DT cleanups Claudiu Beznea
@ 2024-02-18 15:13 ` Claudiu Beznea
  2024-02-18 15:13 ` [PATCH 2/2] ARM: dts: microchip: sam9x60: " Claudiu Beznea
  2024-02-23 20:27 ` [PATCH 0/2] ARM: dts: microchip: few DT cleanups claudiu beznea
  2 siblings, 0 replies; 4+ messages in thread
From: Claudiu Beznea @ 2024-02-18 15:13 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, conor+dt, nicolas.ferre,
	alexandre.belloni
  Cc: devicetree, linux-kernel, linux-arm-kernel, Claudiu Beznea

Align dmas to the opening '<' to comply with the dts coding style,
indentation section, point 3: "For arrays spanning across lines, it is
preferred to align the continued entries with opening < from the first
line."

Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
---
 arch/arm/boot/dts/microchip/sama7g5.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
index 269e0a3ca269..15227a870d34 100644
--- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -714,7 +714,7 @@ uart0: serial@200 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
-					<&dma1 AT91_XDMAC_DT_PERID(5)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(5)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -740,7 +740,7 @@ i2c1: i2c@600 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
-					<&dma0 AT91_XDMAC_DT_PERID(7)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
@@ -763,7 +763,7 @@ uart3: serial@200 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
-					<&dma1 AT91_XDMAC_DT_PERID(11)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(11)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -807,7 +807,7 @@ uart4: serial@200 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
-					<&dma1 AT91_XDMAC_DT_PERID(13)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(13)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -833,7 +833,7 @@ uart7: serial@200 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
-					<&dma1 AT91_XDMAC_DT_PERID(19)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -928,7 +928,7 @@ i2c8: i2c@600 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
-					<&dma0 AT91_XDMAC_DT_PERID(21)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
@@ -952,7 +952,7 @@ i2c9: i2c@600 {
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
-					<&dma0 AT91_XDMAC_DT_PERID(23)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
@@ -977,7 +977,7 @@ spi11: spi@400 {
 				#size-cells = <0>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
-					    <&dma0 AT91_XDMAC_DT_PERID(27)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(27)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
-- 
2.39.2


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 2/2] ARM: dts: microchip: sam9x60: align dmas to the opening '<'
  2024-02-18 15:13 [PATCH 0/2] ARM: dts: microchip: few DT cleanups Claudiu Beznea
  2024-02-18 15:13 ` [PATCH 1/2] ARM: dts: microchip: sama7g5: align dmas to the opening '<' Claudiu Beznea
@ 2024-02-18 15:13 ` Claudiu Beznea
  2024-02-23 20:27 ` [PATCH 0/2] ARM: dts: microchip: few DT cleanups claudiu beznea
  2 siblings, 0 replies; 4+ messages in thread
From: Claudiu Beznea @ 2024-02-18 15:13 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, conor+dt, nicolas.ferre,
	alexandre.belloni
  Cc: devicetree, linux-kernel, linux-arm-kernel, Claudiu Beznea

Align dmas to the opening '<' to comply with the dts coding style,
indentation section, point 3: "For arrays spanning across lines, it is
preferred to align the continued entries with opening < from the first
line."

Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
---
 arch/arm/boot/dts/microchip/sam9x60.dtsi | 64 ++++++++++++------------
 1 file changed, 32 insertions(+), 32 deletions(-)

diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 73d570a17269..291540e5d81e 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -179,7 +179,7 @@ uart4: serial@200 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(8))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(9))>;
@@ -202,7 +202,7 @@ spi4: spi@400 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(8))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(9))>;
@@ -220,7 +220,7 @@ i2c4: i2c@600 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(8))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(9))>;
@@ -248,7 +248,7 @@ uart5: serial@200 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(10))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(11))>;
@@ -271,7 +271,7 @@ spi5: spi@400 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(10))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(11))>;
@@ -289,7 +289,7 @@ i2c5: i2c@600 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(10))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(11))>;
@@ -377,7 +377,7 @@ uart11: serial@200 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(22))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(23))>;
@@ -399,7 +399,7 @@ i2c11: i2c@600 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(22))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(23))>;
@@ -426,7 +426,7 @@ uart12: serial@200 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(24))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(25))>;
@@ -448,7 +448,7 @@ i2c12: i2c@600 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(24))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(25))>;
@@ -583,7 +583,7 @@ uart6: serial@200 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(12))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(13))>;
@@ -605,7 +605,7 @@ i2c6: i2c@600 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(12))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(13))>;
@@ -632,7 +632,7 @@ uart7: serial@200 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(14))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(15))>;
@@ -654,7 +654,7 @@ i2c7: i2c@600 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(14))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(15))>;
@@ -681,7 +681,7 @@ uart8: serial@200 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(16))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(17))>;
@@ -703,7 +703,7 @@ i2c8: i2c@600 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(16))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(17))>;
@@ -730,7 +730,7 @@ uart0: serial@200 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(0))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(1))>;
@@ -753,7 +753,7 @@ spi0: spi@400 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(0))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(1))>;
@@ -771,7 +771,7 @@ i2c0: i2c@600 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(0))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(1))>;
@@ -798,7 +798,7 @@ uart1: serial@200 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(2))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(3))>;
@@ -821,7 +821,7 @@ spi1: spi@400 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(2))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(3))>;
@@ -839,7 +839,7 @@ i2c1: i2c@600 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(2))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(3))>;
@@ -866,7 +866,7 @@ uart2: serial@200 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(4))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(5))>;
@@ -889,7 +889,7 @@ spi2: spi@400 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(4))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(5))>;
@@ -907,7 +907,7 @@ i2c2: i2c@600 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(4))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(5))>;
@@ -934,7 +934,7 @@ uart3: serial@200 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(6))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(7))>;
@@ -957,7 +957,7 @@ spi3: spi@400 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(6))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(7))>;
@@ -975,7 +975,7 @@ i2c3: i2c@600 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(6))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(7))>;
@@ -1057,7 +1057,7 @@ uart9: serial@200 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(18))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(19))>;
@@ -1079,7 +1079,7 @@ i2c9: i2c@600 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(18))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(19))>;
@@ -1106,7 +1106,7 @@ uart10: serial@200 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(20))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(21))>;
@@ -1128,7 +1128,7 @@ i2c10: i2c@600 {
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(20))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(21))>;
-- 
2.39.2


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH 0/2] ARM: dts: microchip: few DT cleanups
  2024-02-18 15:13 [PATCH 0/2] ARM: dts: microchip: few DT cleanups Claudiu Beznea
  2024-02-18 15:13 ` [PATCH 1/2] ARM: dts: microchip: sama7g5: align dmas to the opening '<' Claudiu Beznea
  2024-02-18 15:13 ` [PATCH 2/2] ARM: dts: microchip: sam9x60: " Claudiu Beznea
@ 2024-02-23 20:27 ` claudiu beznea
  2 siblings, 0 replies; 4+ messages in thread
From: claudiu beznea @ 2024-02-23 20:27 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, conor+dt, nicolas.ferre,
	alexandre.belloni
  Cc: devicetree, linux-kernel, linux-arm-kernel


On 18.02.2024 17:13, Claudiu Beznea wrote:
> Hi,
> 
> Series adds minor cleanups for sam9x60 and sama7g5.
> 
> Thank you,
> Claudiu Beznea
> 
> Claudiu Beznea (2):
>   ARM: dts: microchip: sama7g5: align dmas to opening '<'
>   ARM: dts: microchip: sam9x60: align dmas to opening '<'

Applied to at91-dt, thanks!


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2024-02-23 20:27 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-02-18 15:13 [PATCH 0/2] ARM: dts: microchip: few DT cleanups Claudiu Beznea
2024-02-18 15:13 ` [PATCH 1/2] ARM: dts: microchip: sama7g5: align dmas to the opening '<' Claudiu Beznea
2024-02-18 15:13 ` [PATCH 2/2] ARM: dts: microchip: sam9x60: " Claudiu Beznea
2024-02-23 20:27 ` [PATCH 0/2] ARM: dts: microchip: few DT cleanups claudiu beznea

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®