[PATCH v2] ASoC: qcom: audioreach: support multichannel PCM formats

[PATCH v2] ASoC: qcom: audioreach: support multichannel PCM formats

[Zhangfei Gao]

AudioReach currently rejects PCM streams with more than four channels in
the PCM and shared-memory media format paths.

Reuse q6dsp_map_channels() to support multichannel PCM formats.

Signed-off-by: Zhangfei Gao <zhangfei.gao@oss.qualcomm.com>
---

v2: reuse q6dsp_map_channels

 sound/soc/qcom/qdsp6/audioreach.c       | 26 -------------------------
 sound/soc/qcom/qdsp6/audioreach.h       |  1 -
 sound/soc/qcom/qdsp6/q6apm-dai.c        | 12 +++++++++---
 sound/soc/qcom/qdsp6/q6apm-lpass-dais.c |  9 +++++++--
 4 files changed, 16 insertions(+), 32 deletions(-)

diff --git a/sound/soc/qcom/qdsp6/audioreach.c b/sound/soc/qcom/qdsp6/audioreach.c
index d2dc5d37bccf..33161523c7da 100644
--- a/sound/soc/qcom/qdsp6/audioreach.c
+++ b/sound/soc/qcom/qdsp6/audioreach.c
@@ -306,22 +306,6 @@ void *audioreach_alloc_apm_cmd_pkt(int pkt_size, uint32_t opcode, uint32_t token
 }
 EXPORT_SYMBOL_GPL(audioreach_alloc_apm_cmd_pkt);
 
-void audioreach_set_default_channel_mapping(u8 *ch_map, int num_channels)
-{
-	if (num_channels == 1) {
-		ch_map[0] =  PCM_CHANNEL_FL;
-	} else if (num_channels == 2) {
-		ch_map[0] =  PCM_CHANNEL_FL;
-		ch_map[1] =  PCM_CHANNEL_FR;
-	} else if (num_channels == 4) {
-		ch_map[0] =  PCM_CHANNEL_FL;
-		ch_map[1] =  PCM_CHANNEL_FR;
-		ch_map[2] =  PCM_CHANNEL_LS;
-		ch_map[3] =  PCM_CHANNEL_RS;
-	}
-}
-EXPORT_SYMBOL_GPL(audioreach_set_default_channel_mapping);
-
 static void apm_populate_container_config(struct apm_container_obj *cfg,
 					  const struct audioreach_container *cont)
 {
@@ -1185,11 +1169,6 @@ static int audioreach_pcm_set_media_format(struct q6apm_graph *graph,
 	int payload_size;
 	int i, j;
 
-	if (num_channels > 4) {
-		dev_err(graph->dev, "Error: Invalid channels (%d)!\n", num_channels);
-		return -EINVAL;
-	}
-
 	payload_size = APM_PCM_MODULE_FMT_CMD_PSIZE(num_channels);
 
 	struct gpr_pkt *pkt __free(kfree) =
@@ -1275,11 +1254,6 @@ static int audioreach_shmem_set_media_format(struct q6apm_graph *graph,
 	int i, j;
 	void *p;
 
-	if (num_channels > 4) {
-		dev_err(graph->dev, "Error: Invalid channels (%d)!\n", num_channels);
-		return -EINVAL;
-	}
-
 	payload_size = APM_SHMEM_FMT_CFG_PSIZE(num_channels) + APM_MODULE_PARAM_DATA_SIZE;
 
 	struct gpr_pkt *pkt __free(kfree) =
diff --git a/sound/soc/qcom/qdsp6/audioreach.h b/sound/soc/qcom/qdsp6/audioreach.h
index 587f14ce71d2..495072da070b 100644
--- a/sound/soc/qcom/qdsp6/audioreach.h
+++ b/sound/soc/qcom/qdsp6/audioreach.h
@@ -1009,7 +1009,6 @@ static inline u16 audioreach_gpr_dest_domain(gpr_device_t *gdev)
 
 void *audioreach_alloc_apm_cmd_pkt(int pkt_size, uint32_t opcode,
 				   uint32_t token);
-void audioreach_set_default_channel_mapping(u8 *ch_map, int num_channels);
 void *audioreach_alloc_cmd_pkt(int payload_size, uint32_t opcode,
 			       uint32_t token, uint32_t src_port,
 			       uint32_t dest_port);
diff --git a/sound/soc/qcom/qdsp6/q6apm-dai.c b/sound/soc/qcom/qdsp6/q6apm-dai.c
index 58beaf906b9f..83594b693569 100644
--- a/sound/soc/qcom/qdsp6/q6apm-dai.c
+++ b/sound/soc/qcom/qdsp6/q6apm-dai.c
@@ -21,6 +21,7 @@
 #include <asm/div64.h>
 #include <asm/dma.h>
 #include "q6apm.h"
+#include "q6dsp-common.h"
 
 #define DRV_NAME "q6apm-dai"
 #define POS_BUFFER_BYTES	4096
@@ -344,7 +345,10 @@ static int q6apm_dai_prepare(struct snd_soc_component *component,
 	cfg.num_channels = runtime->channels;
 	cfg.bit_width = prtd->bits_per_sample;
 	cfg.fmt = SND_AUDIOCODEC_PCM;
-	audioreach_set_default_channel_mapping(cfg.channel_map, runtime->channels);
+	ret = q6dsp_map_channels(cfg.channel_map, runtime->channels);
+	if (ret)
+		return ret;
+
 	if (prtd->state) {
 		/* clear the previous setup if any  */
 		q6apm_graph_stop(prtd->graph);
@@ -1007,8 +1011,10 @@ static int q6apm_dai_compr_set_params(struct snd_soc_component *component,
 		cfg.num_channels = 2;
 		cfg.bit_width = prtd->bits_per_sample;
 		cfg.fmt = codec->id;
-		audioreach_set_default_channel_mapping(cfg.channel_map,
-						       cfg.num_channels);
+		ret = q6dsp_map_channels(cfg.channel_map, cfg.num_channels);
+		if (ret)
+			return ret;
+
 		memcpy(&cfg.codec, codec, sizeof(*codec));
 
 		ret = q6apm_graph_media_format_shmem(prtd->graph, &cfg);
diff --git a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
index 83f2711bceea..fcc0267d3657 100644
--- a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
+++ b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
@@ -147,7 +147,9 @@ static int q6hdmi_hw_params(struct snd_pcm_substream *substream,
 	cfg->bit_width = params_width(params);
 	cfg->sample_rate = params_rate(params);
 	cfg->num_channels = channels;
-	audioreach_set_default_channel_mapping(cfg->channel_map, channels);
+	ret = q6dsp_map_channels(cfg->channel_map, channels);
+	if (ret)
+		return ret;
 
 	switch (dai->id) {
 	case DISPLAY_PORT_RX_0:
@@ -173,11 +175,14 @@ static int q6dma_hw_params(struct snd_pcm_substream *substream,
 	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);
 	struct audioreach_module_config *cfg = &dai_data->module_config[dai->id];
 	int channels = hw_param_interval_c(params, SNDRV_PCM_HW_PARAM_CHANNELS)->max;
+	int ret;
 
 	cfg->bit_width = params_width(params);
 	cfg->sample_rate = params_rate(params);
 	cfg->num_channels = channels;
-	audioreach_set_default_channel_mapping(cfg->channel_map, channels);
+	ret = q6dsp_map_channels(cfg->channel_map, channels);
+	if (ret)
+		return ret;
 
 	return 0;
 }
-- 
2.43.0

Re: [PATCH v2] ASoC: qcom: audioreach: support multichannel PCM formats

[Prasad Kumpatla]

>   #define DRV_NAME "q6apm-dai"
>   #define POS_BUFFER_BYTES	4096
> @@ -344,7 +345,10 @@ static int q6apm_dai_prepare(struct snd_soc_component *component,
>   	cfg.num_channels = runtime->channels;
>   	cfg.bit_width = prtd->bits_per_sample;
>   	cfg.fmt = SND_AUDIOCODEC_PCM;
> -	audioreach_set_default_channel_mapping(cfg.channel_map, runtime->channels);
> +	ret = q6dsp_map_channels(cfg.channel_map, runtime->channels);
> +	if (ret)
> +		return ret;
> +
>   	if (prtd->state) {
>   		/* clear the previous setup if any  */
>   		q6apm_graph_stop(prtd->graph);
> @@ -1007,8 +1011,10 @@ static int q6apm_dai_compr_set_params(struct snd_soc_component *component,
>   		cfg.num_channels = 2;
>   		cfg.bit_width = prtd->bits_per_sample;
>   		cfg.fmt = codec->id;
> -		audioreach_set_default_channel_mapping(cfg.channel_map,
> -						       cfg.num_channels);
> +		ret = q6dsp_map_channels(cfg.channel_map, cfg.num_channels);
|
|
|q6dsp_map_channels()| changes the mono mapping from |PCM_CHANNEL_FL| to 
|PCM_CHANNEL_FC| and does not handle 7 channels. Have these cases been 
checked and confirmed to be supported as expected for AudioReach ?

Thanks,
Prasad

> +		if (ret)
> +			return ret;
> +
>   		memcpy(&cfg.codec, codec, sizeof(*codec));
>   
>   		ret = q6apm_graph_media_format_shmem(prtd->graph, &cfg);
> diff --git a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> index 83f2711bceea..fcc0267d3657 100644
> --- a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> +++ b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> @@ -147,7 +147,9 @@ static int q6hdmi_hw_params(struct snd_pcm_substream *substream,
>   	cfg->bit_width = params_width(params);
>   	cfg->sample_rate = params_rate(params);
>   	cfg->num_channels = channels;
> -	audioreach_set_default_channel_mapping(cfg->channel_map, channels);
> +	ret = q6dsp_map_channels(cfg->channel_map, channels);
> +	if (ret)
> +		return ret;
>   
>   	switch (dai->id) {
>   	case DISPLAY_PORT_RX_0:
> @@ -173,11 +175,14 @@ static int q6dma_hw_params(struct snd_pcm_substream *substream,
>   	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);
>   	struct audioreach_module_config *cfg = &dai_data->module_config[dai->id];
>   	int channels = hw_param_interval_c(params, SNDRV_PCM_HW_PARAM_CHANNELS)->max;
> +	int ret;
>   
>   	cfg->bit_width = params_width(params);
>   	cfg->sample_rate = params_rate(params);
>   	cfg->num_channels = channels;
> -	audioreach_set_default_channel_mapping(cfg->channel_map, channels);
> +	ret = q6dsp_map_channels(cfg->channel_map, channels);
> +	if (ret)
> +		return ret;
>   
>   	return 0;
>   }

Re: [PATCH v2] ASoC: qcom: audioreach: support multichannel PCM formats

[Zhangfei Gao]

On Tue, Oct 27, 2026 at 4:46 PM Prasad Kumpatla
<prasad.kumpatla@oss.qualcomm.com> wrote:
>
> >   #define DRV_NAME "q6apm-dai"
> >   #define POS_BUFFER_BYTES    4096
> > @@ -344,7 +345,10 @@ static int q6apm_dai_prepare(struct snd_soc_component *component,
> >       cfg.num_channels = runtime->channels;
> >       cfg.bit_width = prtd->bits_per_sample;
> >       cfg.fmt = SND_AUDIOCODEC_PCM;
> > -     audioreach_set_default_channel_mapping(cfg.channel_map, runtime->channels);
> > +     ret = q6dsp_map_channels(cfg.channel_map, runtime->channels);
> > +     if (ret)
> > +             return ret;
> > +
> >       if (prtd->state) {
> >               /* clear the previous setup if any  */
> >               q6apm_graph_stop(prtd->graph);
> > @@ -1007,8 +1011,10 @@ static int q6apm_dai_compr_set_params(struct snd_soc_component *component,
> >               cfg.num_channels = 2;
> >               cfg.bit_width = prtd->bits_per_sample;
> >               cfg.fmt = codec->id;
> > -             audioreach_set_default_channel_mapping(cfg.channel_map,
> > -                                                    cfg.num_channels);
> > +             ret = q6dsp_map_channels(cfg.channel_map, cfg.num_channels);
> |
> |
> |q6dsp_map_channels()| changes the mono mapping from |PCM_CHANNEL_FL| to
> |PCM_CHANNEL_FC| and does not handle 7 channels. Have these cases been
> checked and confirmed to be supported as expected for AudioReach ?

Yes, have checked with Rafi, should be PCM_CHANNEL_FC.

Also confirmed from audioreach-engine
https://github.com/AudioReach/audioreach-engine/blob/master/modules/processing/bassboost/capi/src/capi_bassboost_utils.cpp
  case 1:
         if (PCM_CHANNEL_C != format_ptr->format.channel_type[0])

https://github.com/AudioReach/audioreach-engine/blob/master/modules/processing/Virtualizer/api/Virtualizer_api.h
  uint16_t channel_map[0];
  /**< @h2xmle_description  { Payload consisting of channel mapping
information for all the channels. \n
                              The channel mapping is specific for
specific number of channels \n
                              for 1 : [PCM_CHANNEL_C] \n
                              for 2 : [PCM_CHANNEL_L, PCM_CHANNEL_R] \n }

About 7 channel.
If hw requirement is there then we can add right.
Currently no qcom upstream device is testing 7 channels,

For example, RRD 4 chanels and Ride 6 channels.

Thanks

Re: [PATCH v2] ASoC: qcom: audioreach: support multichannel PCM formats

[Prasad Kumpatla]

On 10/27/2026 3:25 PM, Zhangfei Gao wrote:
> On Tue, Oct 27, 2026 at 4:46 PM Prasad Kumpatla
> <prasad.kumpatla@oss.qualcomm.com> wrote:
>>>    #define DRV_NAME "q6apm-dai"
>>>    #define POS_BUFFER_BYTES    4096
>>> @@ -344,7 +345,10 @@ static int q6apm_dai_prepare(struct snd_soc_component *component,
>>>        cfg.num_channels = runtime->channels;
>>>        cfg.bit_width = prtd->bits_per_sample;
>>>        cfg.fmt = SND_AUDIOCODEC_PCM;
>>> -     audioreach_set_default_channel_mapping(cfg.channel_map, runtime->channels);
>>> +     ret = q6dsp_map_channels(cfg.channel_map, runtime->channels);
>>> +     if (ret)
>>> +             return ret;
>>> +
>>>        if (prtd->state) {
>>>                /* clear the previous setup if any  */
>>>                q6apm_graph_stop(prtd->graph);
>>> @@ -1007,8 +1011,10 @@ static int q6apm_dai_compr_set_params(struct snd_soc_component *component,
>>>                cfg.num_channels = 2;
>>>                cfg.bit_width = prtd->bits_per_sample;
>>>                cfg.fmt = codec->id;
>>> -             audioreach_set_default_channel_mapping(cfg.channel_map,
>>> -                                                    cfg.num_channels);
>>> +             ret = q6dsp_map_channels(cfg.channel_map, cfg.num_channels);
>> |
>> |
>> |q6dsp_map_channels()| changes the mono mapping from |PCM_CHANNEL_FL| to
>> |PCM_CHANNEL_FC| and does not handle 7 channels. Have these cases been
>> checked and confirmed to be supported as expected for AudioReach ?
> Yes, have checked with Rafi, should be PCM_CHANNEL_FC.

Thanks for confirmation.

Reviewed-by: Prasad Kumpatla<prasad.kumpatla@oss.qualcomm.com>

Thanks,
Prasad

>
> Also confirmed from audioreach-engine
> https://github.com/AudioReach/audioreach-engine/blob/master/modules/processing/bassboost/capi/src/capi_bassboost_utils.cpp
>    case 1:
>           if (PCM_CHANNEL_C != format_ptr->format.channel_type[0])
>
> https://github.com/AudioReach/audioreach-engine/blob/master/modules/processing/Virtualizer/api/Virtualizer_api.h
>    uint16_t channel_map[0];
>    /**< @h2xmle_description  { Payload consisting of channel mapping
> information for all the channels. \n
>                                The channel mapping is specific for
> specific number of channels \n
>                                for 1 : [PCM_CHANNEL_C] \n
>                                for 2 : [PCM_CHANNEL_L, PCM_CHANNEL_R] \n }
>
> About 7 channel.
> If hw requirement is there then we can add right.
> Currently no qcom upstream device is testing 7 channels,
>
> For example, RRD 4 chanels and Ride 6 channels.
>
> Thanks

Re: [PATCH v2] ASoC: qcom: audioreach: support multichannel PCM formats

[Srinivas Kandagatla]

On 10/26/26 8:25 AM, Zhangfei Gao wrote:
> AudioReach currently rejects PCM streams with more than four channels in
> the PCM and shared-memory media format paths.
bit more context would help, why you need it now?

> 
> Reuse q6dsp_map_channels() to support multichannel PCM formats.
> 
> Signed-off-by: Zhangfei Gao <zhangfei.gao@oss.qualcomm.com>
> ---
> 
> v2: reuse q6dsp_map_channels
> 
>  sound/soc/qcom/qdsp6/audioreach.c       | 26 -------------------------
>  sound/soc/qcom/qdsp6/audioreach.h       |  1 -
>  sound/soc/qcom/qdsp6/q6apm-dai.c        | 12 +++++++++---
>  sound/soc/qcom/qdsp6/q6apm-lpass-dais.c |  9 +++++++--
>  4 files changed, 16 insertions(+), 32 deletions(-)
> 
> diff --git a/sound/soc/qcom/qdsp6/audioreach.c b/sound/soc/qcom/qdsp6/audioreach.c
> index d2dc5d37bccf..33161523c7da 100644
> --- a/sound/soc/qcom/qdsp6/audioreach.c
> +++ b/sound/soc/qcom/qdsp6/audioreach.c
> @@ -306,22 +306,6 @@ void *audioreach_alloc_apm_cmd_pkt(int pkt_size, uint32_t opcode, uint32_t token
>  }
>  EXPORT_SYMBOL_GPL(audioreach_alloc_apm_cmd_pkt);
>  
> -void audioreach_set_default_channel_mapping(u8 *ch_map, int num_channels)
> -{
> -	if (num_channels == 1) {
> -		ch_map[0] =  PCM_CHANNEL_FL;
> -	} else if (num_channels == 2) {
> -		ch_map[0] =  PCM_CHANNEL_FL;
> -		ch_map[1] =  PCM_CHANNEL_FR;
> -	} else if (num_channels == 4) {
> -		ch_map[0] =  PCM_CHANNEL_FL;
> -		ch_map[1] =  PCM_CHANNEL_FR;
> -		ch_map[2] =  PCM_CHANNEL_LS;
> -		ch_map[3] =  PCM_CHANNEL_RS;
> -	}
> -}
> -EXPORT_SYMBOL_GPL(audioreach_set_default_channel_mapping);
> -
while you at this, please remove AR_PCM_MAX_NUM_CHANNEL too.

Other than that it looks good to me.


Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>

--srini
>  static void apm_populate_container_config(struct apm_container_obj *cfg,
>  					  const struct audioreach_container *cont)
>  {
> @@ -1185,11 +1169,6 @@ static int audioreach_pcm_set_media_format(struct q6apm_graph *graph,
>  	int payload_size;
>  	int i, j;
>  
> -	if (num_channels > 4) {
> -		dev_err(graph->dev, "Error: Invalid channels (%d)!\n", num_channels);
> -		return -EINVAL;
> -	}
> -
>  	payload_size = APM_PCM_MODULE_FMT_CMD_PSIZE(num_channels);
>  
>  	struct gpr_pkt *pkt __free(kfree) =
> @@ -1275,11 +1254,6 @@ static int audioreach_shmem_set_media_format(struct q6apm_graph *graph,
>  	int i, j;
>  	void *p;
>  
> -	if (num_channels > 4) {
> -		dev_err(graph->dev, "Error: Invalid channels (%d)!\n", num_channels);
> -		return -EINVAL;
> -	}
> -
>  	payload_size = APM_SHMEM_FMT_CFG_PSIZE(num_channels) + APM_MODULE_PARAM_DATA_SIZE;
>  
>  	struct gpr_pkt *pkt __free(kfree) =
> diff --git a/sound/soc/qcom/qdsp6/audioreach.h b/sound/soc/qcom/qdsp6/audioreach.h
> index 587f14ce71d2..495072da070b 100644
> --- a/sound/soc/qcom/qdsp6/audioreach.h
> +++ b/sound/soc/qcom/qdsp6/audioreach.h
> @@ -1009,7 +1009,6 @@ static inline u16 audioreach_gpr_dest_domain(gpr_device_t *gdev)
>  
>  void *audioreach_alloc_apm_cmd_pkt(int pkt_size, uint32_t opcode,
>  				   uint32_t token);
> -void audioreach_set_default_channel_mapping(u8 *ch_map, int num_channels);
>  void *audioreach_alloc_cmd_pkt(int payload_size, uint32_t opcode,
>  			       uint32_t token, uint32_t src_port,
>  			       uint32_t dest_port);
> diff --git a/sound/soc/qcom/qdsp6/q6apm-dai.c b/sound/soc/qcom/qdsp6/q6apm-dai.c
> index 58beaf906b9f..83594b693569 100644
> --- a/sound/soc/qcom/qdsp6/q6apm-dai.c
> +++ b/sound/soc/qcom/qdsp6/q6apm-dai.c
> @@ -21,6 +21,7 @@
>  #include <asm/div64.h>
>  #include <asm/dma.h>
>  #include "q6apm.h"
> +#include "q6dsp-common.h"
>  
>  #define DRV_NAME "q6apm-dai"
>  #define POS_BUFFER_BYTES	4096
> @@ -344,7 +345,10 @@ static int q6apm_dai_prepare(struct snd_soc_component *component,
>  	cfg.num_channels = runtime->channels;
>  	cfg.bit_width = prtd->bits_per_sample;
>  	cfg.fmt = SND_AUDIOCODEC_PCM;
> -	audioreach_set_default_channel_mapping(cfg.channel_map, runtime->channels);
> +	ret = q6dsp_map_channels(cfg.channel_map, runtime->channels);
> +	if (ret)
> +		return ret;
> +
>  	if (prtd->state) {
>  		/* clear the previous setup if any  */
>  		q6apm_graph_stop(prtd->graph);
> @@ -1007,8 +1011,10 @@ static int q6apm_dai_compr_set_params(struct snd_soc_component *component,
>  		cfg.num_channels = 2;
>  		cfg.bit_width = prtd->bits_per_sample;
>  		cfg.fmt = codec->id;
> -		audioreach_set_default_channel_mapping(cfg.channel_map,
> -						       cfg.num_channels);
> +		ret = q6dsp_map_channels(cfg.channel_map, cfg.num_channels);
> +		if (ret)
> +			return ret;
> +
>  		memcpy(&cfg.codec, codec, sizeof(*codec));
>  
>  		ret = q6apm_graph_media_format_shmem(prtd->graph, &cfg);
> diff --git a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> index 83f2711bceea..fcc0267d3657 100644
> --- a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> +++ b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> @@ -147,7 +147,9 @@ static int q6hdmi_hw_params(struct snd_pcm_substream *substream,
>  	cfg->bit_width = params_width(params);
>  	cfg->sample_rate = params_rate(params);
>  	cfg->num_channels = channels;
> -	audioreach_set_default_channel_mapping(cfg->channel_map, channels);
> +	ret = q6dsp_map_channels(cfg->channel_map, channels);
> +	if (ret)
> +		return ret;
>  
>  	switch (dai->id) {
>  	case DISPLAY_PORT_RX_0:
> @@ -173,11 +175,14 @@ static int q6dma_hw_params(struct snd_pcm_substream *substream,
>  	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);
>  	struct audioreach_module_config *cfg = &dai_data->module_config[dai->id];
>  	int channels = hw_param_interval_c(params, SNDRV_PCM_HW_PARAM_CHANNELS)->max;
> +	int ret;
>  
>  	cfg->bit_width = params_width(params);
>  	cfg->sample_rate = params_rate(params);
>  	cfg->num_channels = channels;
> -	audioreach_set_default_channel_mapping(cfg->channel_map, channels);
> +	ret = q6dsp_map_channels(cfg->channel_map, channels);
> +	if (ret)
> +		return ret;
>  
>  	return 0;
>  }