Re: [PATCH 1/8] media: qcom: camss: Add streams API support for CSIPHY

["Gjorgji Rosikopulos (Consultant)" <gjorgji.rosikopulos@oss.qualcomm.com>]

Hi Bryan,


On 10/12/2026 1:39 AM, Bryan O'Donoghue wrote:
> On 11/09/2026 07:22, 
> Gjorgji.Rosikopulos.gjorgji.rosikopulos@oss.qualcomm.com wrote:
>> From: Gjorgji Rosikopulos <gjorgji.rosikopulos@oss.qualcomm.com>
>>
>> Add the V4L2 subdev streams API to the CSIPHY driver: a passthrough
>> routing table (one VC per stream) and NO_STREAM_MIX routing validation.
>>
>> enable/disable_streams pad ops track active streams per pad via a
>> per-pad enabled_streams[] bitmask, so that multiple source-pad
>> consumers can share a single propagated sink stream without redundant
>> or colliding propagation to the sensor. The shared D-PHY lanes are
>> enabled once, on the transition from no active streams to at least
>> one, and disabled once all streams have gone idle.
>>
>> This is opt-in per CSIPHY instance via the new streams_enable resource
>> flag; no platform sets it yet, so CSIPHYs continue to use the legacy
>> non-streams subdev ops unchanged.
>>
>> Signed-off-by: Gjorgji Rosikopulos <gjorgji.rosikopulos@oss.qualcomm.com>
> + static const struct v4l2_subdev_core_ops csiphy_core_ops = {
> +       .s_power = csiphy_set_power,
> ++>>>>>>> media: qcom: camss: Add streams API support for CSIPHY
>    };
> 
>    static const struct v4l2_subdev_video_ops csiphy_video_ops = {
> @@@ -932,17 -981,17 +1133,30 @@@ int msm_csiphy_register_entity(struct c
>    {
>          struct v4l2_subdev *sd = &csiphy->subdev;
>          struct media_pad *pads = csiphy->pads;
> ++<<<<<<< HEAD
>   +      struct camss *camss = csiphy->camss;
>   +      struct device *dev = camss->dev;
>   +      int ret;
>   +
>   +      if (camss->legacy_phy)
>   +              v4l2_subdev_init(sd, &csiphy_v4l2_ops_legacy);
>   +      else
>   +              v4l2_subdev_init(sd, &csiphy_v4l2_ops);
>   +
>   +      sd->internal_ops = &csiphy_v4l2_internal_ops;
> ++=======
> +       struct device *dev = csiphy->camss->dev;
> +       bool streams_api = csiphy->res->streams_enable;
> +       int ret;
> +
> +       v4l2_subdev_init(sd, streams_api ? &csiphy_streams_v4l2_ops
> +                                             : &csiphy_v4l2_ops);
> +       sd->internal_ops = streams_api ? &csiphy_streams_internal_ops
> +                                       : &csiphy_v4l2_internal_ops;
> ++>>>>>>> media: qcom: camss: Add streams API support for CSIPHY
>          sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +       if (streams_api)
> +               sd->flags |= V4L2_SUBDEV_FL_STREAMS;
>          snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d",
>                   MSM_CSIPHY_NAME, csiphy->id);
>          sd->grp_id = CSIPHY_GRP_ID;
> @@@ -968,22 -1025,16 +1190,35 @@@
>          ret = v4l2_device_register_subdev(v4l2_dev, sd);
>          if (ret < 0) {
>                  dev_err(dev, "Failed to register subdev: %d\n", ret);
> ++<<<<<<< HEAD
>   +              goto media_entity_err;
>   +      }
>   +
>   +      if (!IS_ERR(csiphy->phy)) {
>   +              ret = phy_init(csiphy->phy);
>   +              if (ret) {
>   +                      dev_err(dev, "%s init fail %d\n", csiphy->name, 
> ret);
>   +                      v4l2_device_unregister_subdev(sd);
>   +                      goto media_entity_err;
>   +              }
>   +      }
>   +
>   +      return 0;
>   +
>   +media_entity_err:
>   +      media_entity_cleanup(&sd->entity);
> ++=======
> +               goto err_v4l2_subdev_cleanup;
> +       }
> +
> +       return 0;
> +
> + err_v4l2_subdev_cleanup:
> +       v4l2_subdev_cleanup(sd);
> + err_media_entity_cleanup:
> +       media_entity_cleanup(&sd->entity);
> +
> ++>>>>>>> media: qcom: camss: Add streams API support for CSIPHY

Thanks for pointing this, i am working on new version soon v2 will be 
on top of csiphy changes.

~Gjorgji