* [PATCH] arm64: dts: mediatek: mt7622: Align GPIO hog name with bindings
@ 2025-01-15 21:18 Krzysztof Kozlowski
2025-02-12 20:45 ` Krzysztof Kozlowski
2025-04-16 7:41 ` Krzysztof Kozlowski
0 siblings, 2 replies; 3+ messages in thread
From: Krzysztof Kozlowski @ 2025-01-15 21:18 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek
Cc: Krzysztof Kozlowski
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:
mt7622-bananapi-bpi-r64.dtb: asm_sel: $nodename:0: 'asm_sel' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index d12eac9b3eeb..9f100b18a676 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -320,7 +320,7 @@ &pio {
/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
* SATA functions. i.e. output-high: PCIe, output-low: SATA
*/
- asm_sel {
+ asm-sel-hog {
gpio-hog;
gpios = <90 GPIO_ACTIVE_HIGH>;
output-high;
--
2.43.0
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: mediatek: mt7622: Align GPIO hog name with bindings
2025-01-15 21:18 [PATCH] arm64: dts: mediatek: mt7622: Align GPIO hog name with bindings Krzysztof Kozlowski
@ 2025-02-12 20:45 ` Krzysztof Kozlowski
2025-04-16 7:41 ` Krzysztof Kozlowski
1 sibling, 0 replies; 3+ messages in thread
From: Krzysztof Kozlowski @ 2025-02-12 20:45 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Matthias Brugger, AngeloGioacchino Del Regno,
devicetree, linux-kernel, linux-arm-kernel, linux-mediatek
On 15/01/2025 22:18, Krzysztof Kozlowski wrote:
> Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
> to fix dtbs_check warning:
>
> mt7622-bananapi-bpi-r64.dtb: asm_sel: $nodename:0: 'asm_sel' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Any comments on the patch?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: dts: mediatek: mt7622: Align GPIO hog name with bindings
2025-01-15 21:18 [PATCH] arm64: dts: mediatek: mt7622: Align GPIO hog name with bindings Krzysztof Kozlowski
2025-02-12 20:45 ` Krzysztof Kozlowski
@ 2025-04-16 7:41 ` Krzysztof Kozlowski
1 sibling, 0 replies; 3+ messages in thread
From: Krzysztof Kozlowski @ 2025-04-16 7:41 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, Krzysztof Kozlowski
On Wed, 15 Jan 2025 22:18:01 +0100, Krzysztof Kozlowski wrote:
> Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
> to fix dtbs_check warning:
>
> mt7622-bananapi-bpi-r64.dtb: asm_sel: $nodename:0: 'asm_sel' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
>
>
Applied, thanks!
[1/1] arm64: dts: mediatek: mt7622: Align GPIO hog name with bindings
https://git.kernel.org/krzk/linux-dt/c/6e3b067d3c5e00dea2e38c609fcd247baa74dec4
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2025-04-16 7:41 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-01-15 21:18 [PATCH] arm64: dts: mediatek: mt7622: Align GPIO hog name with bindings Krzysztof Kozlowski
2025-02-12 20:45 ` Krzysztof Kozlowski
2025-04-16 7:41 ` Krzysztof Kozlowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®