Re: hdc: lost interrupt

[Derek J Witt <djw@flinthills.com>]

[-- Attachment #1: Type: text/plain, Size: 1811 bytes --]

Yeah, I do have APIC enabled. I'm using the local APIC and the IO-apic. 
My Celeron PPGA 500 does have an apic. Could the apic be causing the
interrupt timing problems?  Sorry about the double post.


On Sat, 2002-03-02 at 12:06, Derek J Witt wrote:
> yeah, I am. My celeron 500 PPGA has APIC. Oh, could the apic causing
> interrupt timing problems?
> 
> 
> On Sat, 2002-03-02 at 10:16, Mark Hahn wrote:
> > > losing IDE interrupts.  I tried disabling multimode in makeconfig but to
> > 
> > are you using the local apic?
> > 
> > here are the set settings I use on my via-based machines (which are all stable):
> > CONFIG_IDE=y
> > CONFIG_BLK_DEV_IDE=y
> > CONFIG_BLK_DEV_IDEDISK=y
> > CONFIG_IDEDISK_MULTI_MODE=y
> > CONFIG_BLK_DEV_IDECD=y
> > CONFIG_BLK_DEV_IDEPCI=y
> > CONFIG_IDEPCI_SHARE_IRQ=y
> > CONFIG_BLK_DEV_IDEDMA_PCI=y
> > CONFIG_BLK_DEV_ADMA=y
> > CONFIG_IDEDMA_PCI_AUTO=y
> > CONFIG_BLK_DEV_IDEDMA=y
> > CONFIG_BLK_DEV_VIA82CXXX=y
> > CONFIG_IDEDMA_AUTO=y
> > CONFIG_BLK_DEV_IDE_MODES=y
> > 
> > > Has anyone else with a Via chipset been able to boot into 2.5.x without having these interrupt problems? Any suggestions will be helpful.
> > 
> > I confess I haven't ventured to use 2.5 on any machines.
> > 
> > 
> -- 
> **  Derek J Witt                                              **
> *   Email: mailto:djw@flinthills.com                           *
> *   Home Page: http://www.flinthills.com/~djw/                 *
> *** "...and on the eighth day, God met Bill Gates." - Unknown **
-- 
**  Derek J Witt                                              **
*   Email: mailto:djw@flinthills.com                           *
*   Home Page: http://www.flinthills.com/~djw/                 *
*** "...and on the eighth day, God met Bill Gates." - Unknown **

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 232 bytes --]