From: Anton Altaparmakov <aia21@cantab.net>
To: Marcin Dalecki <dalecki@evision.ag>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [BUG] 2.5.31 doesn't boot - looks IDE related
Date: 13 Aug 2002 09:38:02 +0100 [thread overview]
Message-ID: <1029227882.6892.90.camel@storm.christs.cam.ac.uk> (raw)
Marcin,
2.5.31 dies with the last messages being:
[snip]
ATA/ATAPI device driver v7.0.0
ATA: PCI bus speed 33.3MHz
ATA: VIA Technologies, Inc. Bus Master IDE, PCI slot 00:07.1
ATA: chipset rev.: 6
ATA: non-legacy mode: IRQ probe delayed
VP_IDE: VIA vt82c686b (rev 40) ATA UDMA100 controller on PCI 00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L040AVER07-0, DISK drive
hdc: LITE-ON LTR-12102B, ATAPI CD/DVD-ROM drive
hdd: Maxtor 90288D2, DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
<it is dead>
2.4.19 at the same place gives:
[snip]
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L040AVER07-0, ATA DISK drive
hdc: LITE-ON LTR-12102B, ATAPI CD/DVD-ROM drive
hdd: Maxtor 90288D2, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=5005/255/63,
UDMA(100)
hdd: 5627664 sectors (2881 MB) w/256KiB Cache, CHS=5583/16/63, UDMA(33)
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
hdd: [PTBL] [697/128/63] hdd1 hdd2 < hdd5 hdd6 hdd7 hdd8 hdd9 hdd10 >
<and continues happily>
Looks like your domain... Any hope for having IDE working again soon?
I've got NTFS write code now and can't test it because I can't boot the
kernel! )-:
Perhaps I should just move all my development to 2.4 and forget 2.5...
--
Best regards,
Anton
--
Anton Altaparmakov <aia21 at cantab.net> (replace at with @)
Linux NTFS maintainer / IRC: #ntfs on irc.openprojects.net
WWW: http://linux-ntfs.sf.net/, http://www-stu.christs.cam.ac.uk/~aia21/
next reply other threads:[~2002-08-13 8:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-13 8:38 Anton Altaparmakov [this message]
2002-08-13 12:18 Adam J. Richter
2002-08-22 3:20 Adam J. Richter
2002-09-03 8:11 Adam J. Richter
2002-09-03 8:43 ` Anton Altaparmakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1029227882.6892.90.camel@storm.christs.cam.ac.uk \
--to=aia21@cantab.net \
--cc=dalecki@evision.ag \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®