From: "Adam J. Richter" <adam@yggdrasil.com>
To: aia21@cantab.net, linux-kernel@vger.kernel.org
Subject: Re: [BUG] 2.5.31 doesn't boot - looks IDE related
Date: Tue, 3 Sep 2002 01:11:18 -0700 [thread overview]
Message-ID: <200209030811.BAA03979@adam.yggdrasil.com> (raw)
It turns out that the stock 2.5.33 drivers/ide (Jens's port of
the 2.4 IDE drivers to 2.5) also exhibits this problem, so it appears
not to be a bug due to Marcin's drivers/ide changes.
Adam J. Richter __ ______________ 575 Oroville Road
adam@yggdrasil.com \ / Milpitas, California 95035
+1 408 309-6081 | g g d r a s i l United States of America
"Free Software For The Rest Of Us."
I wrote:
>On 2002-08-13, Anton Altaparmakov wrote:
>
>>2.5.31 dies with the last messages being:
>>[snip]
>>ATA/ATAPI device driver v7.0.0
>>ATA: PCI bus speed 33.3MHz
>>ATA: VIA Technologies, Inc. Bus Master IDE, PCI slot 00:07.1
>>ATA: chipset rev.: 6
>>ATA: non-legacy mode: IRQ probe delayed
>>VP_IDE: VIA vt82c686b (rev 40) ATA UDMA100 controller on PCI 00:07.1
>> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
>> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
>>hda: IC35L040AVER07-0, DISK drive
>>hdc: LITE-ON LTR-12102B, ATAPI CD/DVD-ROM drive
>>hdd: Maxtor 90288D2, DISK drive
>>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>ide1 at 0x170-0x177,0x376 on irq 15
>><it is dead>
>
> I tried to reproduce your problem on two Via motherboard,
>which I set up with the following configuration:
>
> Primary IDE: Master: A Maxtor IDE hard disk as master.
>
> Secondary IDE: Master: An ATAPI CDROM or DVD-ROM drive.
> Slave: Another Maxtor IDE hard disk (17.2GB)
>
> One of the motherboards had an 866MHz CPU and did not experience
>any problem.
>
> The other one, with a 1GHz CPU, failed to recognize the ATAPI
>CDROM, but recognized both hard disks, and did not hang. Rebooting with
>the slave hard disk removed resulted in the ATAPI drive to being
>recognized. Patching from approxiamtely stock 2.5.31 to Martin's IDE 115
>on the misbehaving machine CDROM did not change these behaviors.
[...]
next reply other threads:[~2002-09-03 8:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-03 8:11 Adam J. Richter [this message]
2002-09-03 8:43 ` Anton Altaparmakov
-- strict thread matches above, loose matches on Subject: below --
2002-08-22 3:20 Adam J. Richter
2002-08-13 12:18 Adam J. Richter
2002-08-13 8:38 Anton Altaparmakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200209030811.BAA03979@adam.yggdrasil.com \
--to=adam@yggdrasil.com \
--cc=aia21@cantab.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®