From: Mark C <gen-lists@blueyonder.co.uk>
To: Patrick Mansfield <patmans@us.ibm.com>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
linux-usb-users <linux-usb-users@lists.sourceforge.net>
Subject: Re: Problems accessing USB Mass Storage
Date: 17 Sep 2002 23:51:15 +0100 [thread overview]
Message-ID: <1032303080.1141.5.camel@stimpy.angelnet.internal> (raw)
In-Reply-To: <20020917152102.A17561@eng2.beaverton.ibm.com>
On Tue, 2002-09-17 at 23:21, Patrick Mansfield wrote:
> You should be able to run the equivalent:
>
> dd if=/dev/sda of=/dev/zero bs=512 count=8
I done that and please find the output below:
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command START_STOP (6 bytes)
usb-storage: 1b 00 00 00 01 00 74 c1 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x20 Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: clearing endpoint halt for pipe 0xc0038280
usb-storage: usb_stor_clear_halt: result=0
usb-storage: Attempting to get CSW (2nd try)...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x20 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk command S 0x43425355 T 0x20 Trg 0 LUN 0 L 18 F 128 CL
6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 18 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x20 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
usb-storage: Illegal Request: invalid field in CDB
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
SCSI device (ioctl) reports ILLEGAL REQUEST.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 00 00 00 00 e9 df
usb-storage: Bulk command S 0x43425355 T 0x21 Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x21 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage: 25 00 00 00 00 00 00 00 00 00 e9 df
usb-storage: Bulk command S 0x43425355 T 0x22 Trg 0 LUN 0 L 8 F 128 CL
10
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 8 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 8/8
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x22 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command MODE_SENSE (6 bytes)
usb-storage: 1a 00 3f 00 ff 00 00 00 00 00 e9 df
usb-storage: Bulk command S 0x43425355 T 0x23 Trg 0 LUN 0 L 255 F 128 CL
6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned -32 xferred 0/255
usb-storage: clearing endpoint halt for pipe 0xc0038280
usb-storage: usb_stor_clear_halt: result=0
usb-storage: usb_stor_transfer_partial(): unknown error
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x23 R 255 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk command S 0x43425355 T 0x23 Trg 0 LUN 0 L 18 F 128 CL
6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 18 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x23 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
usb-storage: Illegal Request: invalid field in CDB
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
sda: test WP failed, assume Write Enabled
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
unable to read partition table
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
usb-storage: 1e 00 00 00 01 00 d7 d4 b7 1e 14 c0
usb-storage: Bulk command S 0x43425355 T 0x24 Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x24 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
I/O error: dev 08:00, sector 0
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
usb-storage: 1e 00 00 00 00 00 12 c0 30 33 67 d5
usb-storage: Bulk command S 0x43425355 T 0x25 Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x25 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Thanks
Mark
--
---
To steal ideas from one person is plagiarism;
to steal from many is research.
next prev parent reply other threads:[~2002-09-17 22:48 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-17 11:25 Mark C
2002-09-17 15:18 ` Greg KH
2002-09-17 17:37 ` Thomas Dodd
2002-09-17 17:46 ` Greg KH
2002-09-17 18:06 ` Richard B. Johnson
2002-09-17 20:09 ` Thomas Dodd
2002-09-17 21:01 ` Mark C
2002-09-17 21:43 ` Rogier Wolff
2002-09-17 22:04 ` Thomas Dodd
2002-09-17 22:12 ` [Linux-usb-users] " Randy.Dunlap
2002-09-17 22:21 ` Patrick Mansfield
2002-09-17 22:51 ` Mark C [this message]
2002-09-17 23:09 ` [Linux-usb-users] " Randy.Dunlap
[not found] ` <mailman.1032306001.9987.linux-kernel2news@redhat.com>
2002-09-18 1:37 ` Pete Zaitcev
2002-09-18 6:01 ` Rogier Wolff
2002-09-17 18:15 Jonathan Corbet
2002-09-17 18:22 ` Randy.Dunlap
2002-09-17 19:46 ` Mark C
2002-09-17 20:12 ` jbradford
2002-09-17 21:21 ` Jonathan Corbet
2002-09-17 19:50 ` Thomas Dodd
2002-09-17 19:58 ` Matthew Dharm
2002-09-17 20:13 ` Thomas Dodd
2002-09-18 9:28 ` Andries Brouwer
2002-09-18 9:22 ` Andries Brouwer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1032303080.1141.5.camel@stimpy.angelnet.internal \
--to=gen-lists@blueyonder.co.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb-users@lists.sourceforge.net \
--cc=patmans@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®