* [PATCH v2 1/1] ARM:dts:aspeed: Initial device tree for AMD EthanolX
@ 2020-07-22 21:55 Supreeth Venkatesh
2020-07-23 7:23 ` Joel Stanley
0 siblings, 1 reply; 3+ messages in thread
From: Supreeth Venkatesh @ 2020-07-22 21:55 UTC (permalink / raw)
To: joel, andrew, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, openbmc, robh+dt
Cc: Supreeth Venkatesh
Initial introduction of AMD EthanolX platform equipped with an
Aspeed ast2500 BMC manufactured by AMD.
AMD EthanolX platform is an AMD customer reference board with an
Aspeed ast2500 BMC manufactured by AMD.
This adds AMD EthanolX device tree file including the flash layout
used by EthanolX BMC machines.
This also adds an entry of AMD EthanolX device tree file in Makefile.
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
---
Changes since v1:
* Addressed review comment regarding SPDX License Identifier
* Added I2c0 and I2c1 which cater to AMD's APML Interface
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 221 ++++++++++++++++++
2 files changed, 222 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d6dfdf73e66b..55ed881d2ebc 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1281,6 +1281,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-ast2600-evb.dtb \
+ aspeed-bmc-amd-ethanolx.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-facebook-cmm.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
new file mode 100644
index 000000000000..3d67fa31a3ab
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 AMD Inc.
+// Author: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "AMD EthanolX BMC";
+ compatible = "amd,ethanolx-bmc", "aspeed,ast2500";
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+ aliases {
+ serial0 = &uart1;
+ serial4 = &uart5;
+ };
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+ leds {
+ compatible = "gpio-leds";
+
+ fault {
+ gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+ };
+ };
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ #include "openbmc-flash-layout.dtsi"
+ };
+};
+
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+ <&syscon ASPEED_CLK_MAC1RCLK>;
+ clock-names = "MACCLK", "RCLK";
+};
+
+&uart1 {
+ //Host Console
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+ //BMC Console
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default>;
+};
+
+//APML for P0
+&i2c0 {
+ reg = <0x80 0x40>;
+ status = "okay";
+};
+
+//APML for P1
+&i2c1 {
+ reg = <0xc0 0x40>;
+ status = "okay";
+};
+
+// Thermal Sensors
+&i2c7 {
+ status = "okay";
+
+ lm75a@48 {
+ compatible = "national,lm75a";
+ reg = <0x48>;
+ };
+
+ lm75a@49 {
+ compatible = "national,lm75a";
+ reg = <0x49>;
+ };
+
+ lm75a@4a {
+ compatible = "national,lm75a";
+ reg = <0x4a>;
+ };
+
+ lm75a@4b {
+ compatible = "national,lm75a";
+ reg = <0x4b>;
+ };
+
+ lm75a@4c {
+ compatible = "national,lm75a";
+ reg = <0x4c>;
+ };
+
+ lm75a@4d {
+ compatible = "national,lm75a";
+ reg = <0x4d>;
+ };
+
+ lm75a@4e {
+ compatible = "national,lm75a";
+ reg = <0x4e>;
+ };
+
+ lm75a@4f {
+ compatible = "national,lm75a";
+ reg = <0x4f>;
+ };
+};
+
+&kcs1 {
+ status = "okay";
+ kcs_addr = <0x60>;
+};
+
+&kcs2 {
+ status = "okay";
+ kcs_addr = <0x62>;
+};
+
+&kcs4 {
+ status = "okay";
+ kcs_addr = <0x97DE>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&lpc_ctrl {
+ //Enable lpc clock
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default
+ &pinctrl_pwm6_default
+ &pinctrl_pwm7_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan@6 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan@7 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+};
+
+
+
--
2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v2 1/1] ARM:dts:aspeed: Initial device tree for AMD EthanolX
2020-07-22 21:55 [PATCH v2 1/1] ARM:dts:aspeed: Initial device tree for AMD EthanolX Supreeth Venkatesh
@ 2020-07-23 7:23 ` Joel Stanley
2020-07-24 19:31 ` Supreeth Venkatesh
0 siblings, 1 reply; 3+ messages in thread
From: Joel Stanley @ 2020-07-23 7:23 UTC (permalink / raw)
To: Supreeth Venkatesh
Cc: Andrew Jeffery, devicetree, Linux ARM, linux-aspeed,
Linux Kernel Mailing List, OpenBMC Maillist, Rob Herring
On Wed, 22 Jul 2020 at 21:55, Supreeth Venkatesh
<supreeth.venkatesh@amd.com> wrote:
>
> Initial introduction of AMD EthanolX platform equipped with an
> Aspeed ast2500 BMC manufactured by AMD.
>
> AMD EthanolX platform is an AMD customer reference board with an
> Aspeed ast2500 BMC manufactured by AMD.
> This adds AMD EthanolX device tree file including the flash layout
> used by EthanolX BMC machines.
>
> This also adds an entry of AMD EthanolX device tree file in Makefile.
>
> Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
> ---
> Changes since v1:
> * Addressed review comment regarding SPDX License Identifier
> * Added I2c0 and I2c1 which cater to AMD's APML Interface
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 221 ++++++++++++++++++
> 2 files changed, 222 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d6dfdf73e66b..55ed881d2ebc 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1281,6 +1281,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
> dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-ast2500-evb.dtb \
> aspeed-ast2600-evb.dtb \
> + aspeed-bmc-amd-ethanolx.dtb \
> aspeed-bmc-arm-centriq2400-rep.dtb \
> aspeed-bmc-arm-stardragon4800-rep2.dtb \
> aspeed-bmc-facebook-cmm.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
> new file mode 100644
> index 000000000000..3d67fa31a3ab
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
> @@ -0,0 +1,221 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2020 AMD Inc.
> +// Author: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "AMD EthanolX BMC";
> + compatible = "amd,ethanolx-bmc", "aspeed,ast2500";
> +
> + memory@80000000 {
> + reg = <0x80000000 0x20000000>;
> + };
> + aliases {
> + serial0 = &uart1;
> + serial4 = &uart5;
> + };
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200 earlyprintk";
> + };
> + leds {
> + compatible = "gpio-leds";
> +
> + fault {
> + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + identify {
> + gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
> + };
> + };
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + #include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +
> +&mac0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii1_default>;
> + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
> + <&syscon ASPEED_CLK_MAC1RCLK>;
> + clock-names = "MACCLK", "RCLK";
> +};
> +
> +&uart1 {
> + //Host Console
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd1_default
> + &pinctrl_rxd1_default>;
> +};
> +
> +&uart5 {
> + //BMC Console
> + status = "okay";
> +};
> +
> +&adc {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc0_default
> + &pinctrl_adc1_default
> + &pinctrl_adc2_default
> + &pinctrl_adc3_default
> + &pinctrl_adc4_default>;
> +};
> +
> +//APML for P0
> +&i2c0 {
> + reg = <0x80 0x40>;
> + status = "okay";
> +};
> +
> +//APML for P1
> +&i2c1 {
> + reg = <0xc0 0x40>;
This is unusual. i2c1 is at 0x80; this will clash with i2c2.
Note that the i2c naming in linux counts from zero, whereas the ASPEED
docs count from 1. So if your board layout has I2C1, you actually want
i2c2 in the device tree.
> + status = "okay";
> +};
> +
> +// Thermal Sensors
> +&i2c7 {
> + status = "okay";
> +
> + lm75a@48 {
> + compatible = "national,lm75a";
> + reg = <0x48>;
> + };
> +
> + lm75a@49 {
> + compatible = "national,lm75a";
> + reg = <0x49>;
> + };
> +
> + lm75a@4a {
> + compatible = "national,lm75a";
> + reg = <0x4a>;
> + };
> +
> + lm75a@4b {
> + compatible = "national,lm75a";
> + reg = <0x4b>;
> + };
> +
> + lm75a@4c {
> + compatible = "national,lm75a";
> + reg = <0x4c>;
> + };
> +
> + lm75a@4d {
> + compatible = "national,lm75a";
> + reg = <0x4d>;
> + };
> +
> + lm75a@4e {
> + compatible = "national,lm75a";
> + reg = <0x4e>;
> + };
> +
> + lm75a@4f {
> + compatible = "national,lm75a";
> + reg = <0x4f>;
> + };
> +};
> +
> +&kcs1 {
> + status = "okay";
> + kcs_addr = <0x60>;
> +};
> +
> +&kcs2 {
> + status = "okay";
> + kcs_addr = <0x62>;
> +};
> +
> +&kcs4 {
> + status = "okay";
> + kcs_addr = <0x97DE>;
> +};
> +
> +&lpc_snoop {
> + status = "okay";
> + snoop-ports = <0x80>;
> +};
> +
> +&lpc_ctrl {
> + //Enable lpc clock
> + status = "okay";
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default
> + &pinctrl_pwm1_default
> + &pinctrl_pwm2_default
> + &pinctrl_pwm3_default
> + &pinctrl_pwm4_default
> + &pinctrl_pwm5_default
> + &pinctrl_pwm6_default
> + &pinctrl_pwm7_default>;
> +
> + fan@0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00>;
> + };
> +
> + fan@1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x01>;
> + };
> +
> + fan@2 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02>;
> + };
> +
> + fan@3 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x03>;
> + };
> +
> + fan@4 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x04>;
> + };
> +
> + fan@5 {
> + reg = <0x05>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x05>;
> + };
> +
> + fan@6 {
> + reg = <0x06>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x06>;
> + };
> +
> + fan@7 {
> + reg = <0x07>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x07>;
> + };
> +};
> +
> +
> +
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v2 1/1] ARM:dts:aspeed: Initial device tree for AMD EthanolX
2020-07-23 7:23 ` Joel Stanley
@ 2020-07-24 19:31 ` Supreeth Venkatesh
0 siblings, 0 replies; 3+ messages in thread
From: Supreeth Venkatesh @ 2020-07-24 19:31 UTC (permalink / raw)
To: Joel Stanley
Cc: Andrew Jeffery, devicetree, Linux ARM, linux-aspeed,
Linux Kernel Mailing List, OpenBMC Maillist, Rob Herring
On 7/23/20 2:23 AM, Joel Stanley wrote:
> [CAUTION: External Email]
>
> On Wed, 22 Jul 2020 at 21:55, Supreeth Venkatesh
> <supreeth.venkatesh@amd.com> wrote:
>>
>> Initial introduction of AMD EthanolX platform equipped with an
>> Aspeed ast2500 BMC manufactured by AMD.
>>
>> AMD EthanolX platform is an AMD customer reference board with an
>> Aspeed ast2500 BMC manufactured by AMD.
>> This adds AMD EthanolX device tree file including the flash layout
>> used by EthanolX BMC machines.
>>
>> This also adds an entry of AMD EthanolX device tree file in Makefile.
>>
>> Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
>> ---
>> Changes since v1:
>> * Addressed review comment regarding SPDX License Identifier
>> * Added I2c0 and I2c1 which cater to AMD's APML Interface
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 221 ++++++++++++++++++
>> 2 files changed, 222 insertions(+)
>> create mode 100644 arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index d6dfdf73e66b..55ed881d2ebc 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -1281,6 +1281,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
>> dtb-$(CONFIG_ARCH_ASPEED) += \
>> aspeed-ast2500-evb.dtb \
>> aspeed-ast2600-evb.dtb \
>> + aspeed-bmc-amd-ethanolx.dtb \
>> aspeed-bmc-arm-centriq2400-rep.dtb \
>> aspeed-bmc-arm-stardragon4800-rep2.dtb \
>> aspeed-bmc-facebook-cmm.dtb \
>> diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
>> new file mode 100644
>> index 000000000000..3d67fa31a3ab
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
>> @@ -0,0 +1,221 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (c) 2020 AMD Inc.
>> +// Author: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
>> +/dts-v1/;
>> +
>> +#include "aspeed-g5.dtsi"
>> +#include <dt-bindings/gpio/aspeed-gpio.h>
>> +
>> +/ {
>> + model = "AMD EthanolX BMC";
>> + compatible = "amd,ethanolx-bmc", "aspeed,ast2500";
>> +
>> + memory@80000000 {
>> + reg = <0x80000000 0x20000000>;
>> + };
>> + aliases {
>> + serial0 = &uart1;
>> + serial4 = &uart5;
>> + };
>> + chosen {
>> + stdout-path = &uart5;
>> + bootargs = "console=ttyS4,115200 earlyprintk";
>> + };
>> + leds {
>> + compatible = "gpio-leds";
>> +
>> + fault {
>> + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
>> + };
>> +
>> + identify {
>> + gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
>> + };
>> + };
>> + iio-hwmon {
>> + compatible = "iio-hwmon";
>> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
>> + };
>> +};
>> +
>> +&fmc {
>> + status = "okay";
>> + flash@0 {
>> + status = "okay";
>> + m25p,fast-read;
>> + #include "openbmc-flash-layout.dtsi"
>> + };
>> +};
>> +
>> +
>> +&mac0 {
>> + status = "okay";
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_rmii1_default>;
>> + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
>> + <&syscon ASPEED_CLK_MAC1RCLK>;
>> + clock-names = "MACCLK", "RCLK";
>> +};
>> +
>> +&uart1 {
>> + //Host Console
>> + status = "okay";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_txd1_default
>> + &pinctrl_rxd1_default>;
>> +};
>> +
>> +&uart5 {
>> + //BMC Console
>> + status = "okay";
>> +};
>> +
>> +&adc {
>> + status = "okay";
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_adc0_default
>> + &pinctrl_adc1_default
>> + &pinctrl_adc2_default
>> + &pinctrl_adc3_default
>> + &pinctrl_adc4_default>;
>> +};
>> +
>> +//APML for P0
>> +&i2c0 {
>> + reg = <0x80 0x40>;
>> + status = "okay";
>> +};
>> +
>> +//APML for P1
>> +&i2c1 {
>> + reg = <0xc0 0x40>;
>
> This is unusual. i2c1 is at 0x80; this will clash with i2c2.
>
> Note that the i2c naming in linux counts from zero, whereas the ASPEED
> docs count from 1. So if your board layout has I2C1, you actually want
> i2c2 in the device tree.
Thanks for catching this. Patch v3 sent.
>
>> + status = "okay";
>> +};
>> +
>> +// Thermal Sensors
>> +&i2c7 {
>> + status = "okay";
>> +
>> + lm75a@48 {
>> + compatible = "national,lm75a";
>> + reg = <0x48>;
>> + };
>> +
>> + lm75a@49 {
>> + compatible = "national,lm75a";
>> + reg = <0x49>;
>> + };
>> +
>> + lm75a@4a {
>> + compatible = "national,lm75a";
>> + reg = <0x4a>;
>> + };
>> +
>> + lm75a@4b {
>> + compatible = "national,lm75a";
>> + reg = <0x4b>;
>> + };
>> +
>> + lm75a@4c {
>> + compatible = "national,lm75a";
>> + reg = <0x4c>;
>> + };
>> +
>> + lm75a@4d {
>> + compatible = "national,lm75a";
>> + reg = <0x4d>;
>> + };
>> +
>> + lm75a@4e {
>> + compatible = "national,lm75a";
>> + reg = <0x4e>;
>> + };
>> +
>> + lm75a@4f {
>> + compatible = "national,lm75a";
>> + reg = <0x4f>;
>> + };
>> +};
>> +
>> +&kcs1 {
>> + status = "okay";
>> + kcs_addr = <0x60>;
>> +};
>> +
>> +&kcs2 {
>> + status = "okay";
>> + kcs_addr = <0x62>;
>> +};
>> +
>> +&kcs4 {
>> + status = "okay";
>> + kcs_addr = <0x97DE>;
>> +};
>> +
>> +&lpc_snoop {
>> + status = "okay";
>> + snoop-ports = <0x80>;
>> +};
>> +
>> +&lpc_ctrl {
>> + //Enable lpc clock
>> + status = "okay";
>> +};
>> +
>> +&pwm_tacho {
>> + status = "okay";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_pwm0_default
>> + &pinctrl_pwm1_default
>> + &pinctrl_pwm2_default
>> + &pinctrl_pwm3_default
>> + &pinctrl_pwm4_default
>> + &pinctrl_pwm5_default
>> + &pinctrl_pwm6_default
>> + &pinctrl_pwm7_default>;
>> +
>> + fan@0 {
>> + reg = <0x00>;
>> + aspeed,fan-tach-ch = /bits/ 8 <0x00>;
>> + };
>> +
>> + fan@1 {
>> + reg = <0x01>;
>> + aspeed,fan-tach-ch = /bits/ 8 <0x01>;
>> + };
>> +
>> + fan@2 {
>> + reg = <0x02>;
>> + aspeed,fan-tach-ch = /bits/ 8 <0x02>;
>> + };
>> +
>> + fan@3 {
>> + reg = <0x03>;
>> + aspeed,fan-tach-ch = /bits/ 8 <0x03>;
>> + };
>> +
>> + fan@4 {
>> + reg = <0x04>;
>> + aspeed,fan-tach-ch = /bits/ 8 <0x04>;
>> + };
>> +
>> + fan@5 {
>> + reg = <0x05>;
>> + aspeed,fan-tach-ch = /bits/ 8 <0x05>;
>> + };
>> +
>> + fan@6 {
>> + reg = <0x06>;
>> + aspeed,fan-tach-ch = /bits/ 8 <0x06>;
>> + };
>> +
>> + fan@7 {
>> + reg = <0x07>;
>> + aspeed,fan-tach-ch = /bits/ 8 <0x07>;
>> + };
>> +};
>> +
>> +
>> +
>> --
>> 2.17.1
>>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-07-24 19:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-22 21:55 [PATCH v2 1/1] ARM:dts:aspeed: Initial device tree for AMD EthanolX Supreeth Venkatesh
2020-07-23 7:23 ` Joel Stanley
2020-07-24 19:31 ` Supreeth Venkatesh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®