* [PATCH] linux-2.5.60_cyclone-fixes_A1
@ 2003-02-10 21:26 john stultz
2003-02-10 21:27 ` [PATCH] linux-2.5.60_enable-cyclone_A0 john stultz
0 siblings, 1 reply; 2+ messages in thread
From: john stultz @ 2003-02-10 21:26 UTC (permalink / raw)
To: Linus Torvalds; +Cc: lkml, Martin J. Bligh, Andrew Morton
Linus, All,
This patch "fixes" the timer_cyclone code by having it
initialize fast_gettimeoffset_quotient and cpu_khz in the same manner as
timer_tsc. This is required for enabling the timer_cyclone code on the
x440.
Ideally fast_gettimeoffset_quotient would not be used outside timer_tsc
and cpu_khz would be initialized generically outside the timer
subsystem. I have patches to do this, but they touch quite a bit of
generic code, and I'd rather not make the timer_cyclone enablement
(patch to follow) depend on these larger changes.
Please apply.
thanks
-john
diff -Nru a/arch/i386/kernel/timers/timer_cyclone.c b/arch/i386/kernel/timers/timer_cyclone.c
--- a/arch/i386/kernel/timers/timer_cyclone.c Mon Feb 10 13:21:37 2003
+++ b/arch/i386/kernel/timers/timer_cyclone.c Mon Feb 10 13:21:37 2003
@@ -17,6 +17,8 @@
#include <asm/fixmap.h>
extern spinlock_t i8253_lock;
+extern unsigned long fast_gettimeoffset_quotient;
+extern unsigned long calibrate_tsc(void);
/* Number of usecs that the last interrupt was delayed */
static int delay_at_last_interrupt;
@@ -142,6 +144,28 @@
printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n");
cyclone_timer = 0;
return -ENODEV;
+ }
+ }
+
+ /* init fast_gettimeoffset_quotent and cpu_khz.
+ * XXX - This should really be done elsewhere,
+ * and in a more generic fashion. -johnstul@us.ibm.com
+ */
+ if (cpu_has_tsc) {
+ unsigned long tsc_quotient = calibrate_tsc();
+ if (tsc_quotient) {
+ fast_gettimeoffset_quotient = tsc_quotient;
+ /* report CPU clock rate in Hz.
+ * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =
+ * clock/second. Our precision is about 100 ppm.
+ */
+ { unsigned long eax=0, edx=1000;
+ __asm__("divl %2"
+ :"=a" (cpu_khz), "=d" (edx)
+ :"r" (tsc_quotient),
+ "0" (eax), "1" (edx));
+ printk("Detected %lu.%03lu MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000);
+ }
}
}
diff -Nru a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
--- a/arch/i386/kernel/timers/timer_tsc.c Mon Feb 10 13:21:37 2003
+++ b/arch/i386/kernel/timers/timer_tsc.c Mon Feb 10 13:21:37 2003
@@ -130,7 +130,7 @@
#define CALIBRATE_LATCH (5 * LATCH)
#define CALIBRATE_TIME (5 * 1000020/HZ)
-static unsigned long __init calibrate_tsc(void)
+unsigned long __init calibrate_tsc(void)
{
/* Set the Gate high, disable speaker */
outb((inb(0x61) & ~0x02) | 0x01, 0x61);
^ permalink raw reply [flat|nested] 2+ messages in thread* [PATCH] linux-2.5.60_enable-cyclone_A0 2003-02-10 21:26 [PATCH] linux-2.5.60_cyclone-fixes_A1 john stultz @ 2003-02-10 21:27 ` john stultz 0 siblings, 0 replies; 2+ messages in thread From: john stultz @ 2003-02-10 21:27 UTC (permalink / raw) To: Linus Torvalds; +Cc: lkml, Martin J. Bligh, Andrew Morton Linus, All, This patch simply enables the existing timer_cyclone code for Summit/x440 systems. It depends on the previously posted cyclone-fixes_A1. Please apply. thanks -john diff -Nru a/arch/i386/kernel/timers/Makefile b/arch/i386/kernel/timers/Makefile --- a/arch/i386/kernel/timers/Makefile Mon Feb 10 13:22:44 2003 +++ b/arch/i386/kernel/timers/Makefile Mon Feb 10 13:22:44 2003 @@ -4,4 +4,4 @@ obj-y := timer.o timer_none.o timer_tsc.o timer_pit.o -obj-$(CONFIG_X86_CYCLONE) += timer_cyclone.o +obj-$(CONFIG_X86_SUMMIT) += timer_cyclone.o diff -Nru a/arch/i386/kernel/timers/timer.c b/arch/i386/kernel/timers/timer.c --- a/arch/i386/kernel/timers/timer.c Mon Feb 10 13:22:44 2003 +++ b/arch/i386/kernel/timers/timer.c Mon Feb 10 13:22:44 2003 @@ -4,9 +4,14 @@ /* list of externed timers */ extern struct timer_opts timer_pit; extern struct timer_opts timer_tsc; - +#ifdef CONFIG_X86_SUMMIT +extern struct timer_opts timer_cyclone; +#endif /* list of timers, ordered by preference, NULL terminated */ static struct timer_opts* timers[] = { +#ifdef CONFIG_X86_SUMMIT + &timer_cyclone, +#endif &timer_tsc, &timer_pit, NULL, diff -Nru a/include/asm-i386/fixmap.h b/include/asm-i386/fixmap.h --- a/include/asm-i386/fixmap.h Mon Feb 10 13:22:44 2003 +++ b/include/asm-i386/fixmap.h Mon Feb 10 13:22:44 2003 @@ -60,7 +60,7 @@ #ifdef CONFIG_X86_F00F_BUG FIX_F00F_IDT, /* Virtual mapping for IDT */ #endif -#ifdef CONFIG_X86_CYCLONE +#ifdef CONFIG_X86_SUMMIT FIX_CYCLONE_TIMER, /*cyclone timer register*/ #endif #ifdef CONFIG_HIGHMEM diff -Nru a/include/asm-i386/mach-summit/mach_mpparse.h b/include/asm-i386/mach-summit/mach_mpparse.h --- a/include/asm-i386/mach-summit/mach_mpparse.h Mon Feb 10 13:22:44 2003 +++ b/include/asm-i386/mach-summit/mach_mpparse.h Mon Feb 10 13:22:44 2003 @@ -1,6 +1,8 @@ #ifndef __ASM_MACH_MPPARSE_H #define __ASM_MACH_MPPARSE_H +extern int use_cyclone; + static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, struct mpc_config_translation *translation) { @@ -17,14 +19,18 @@ { if (!strncmp(oem, "IBM ENSW", 8) && (!strncmp(productid, "VIGIL SMP", 9) - || !strncmp(productid, "RUTHLESS SMP", 12))) + || !strncmp(productid, "RUTHLESS SMP", 12))){ x86_summit = 1; + use_cyclone = 1; /*enable cyclone-timer*/ + } } /* Hook from generic ACPI tables.c */ static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "SERVIGIL", 8)) + if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "SERVIGIL", 8)){ x86_summit = 1; + use_cyclone = 1; /*enable cyclone-timer*/ + } } #endif /* __ASM_MACH_MPPARSE_H */ ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-02-10 21:20 UTC | newest] Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2003-02-10 21:26 [PATCH] linux-2.5.60_cyclone-fixes_A1 john stultz 2003-02-10 21:27 ` [PATCH] linux-2.5.60_enable-cyclone_A0 john stultz
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®