* [PATCH] 2.5.62 spelling fix for interupt -> interrupt in 36 files.
@ 2003-02-19 2:59 Steven Cole
0 siblings, 0 replies; only message in thread
From: Steven Cole @ 2003-02-19 2:59 UTC (permalink / raw)
To: Linus Torvalds; +Cc: LKML
This patch provides the following spelling fix.
interupt -> interrupt
Documentation/s390/Debugging390.txt | 4 +--
Documentation/sysrq.txt | 2 -
arch/cris/drivers/serial.c | 2 -
arch/ia64/hp/sim/simeth.c | 2 -
arch/ia64/sn/io/xbow.c | 2 -
arch/ia64/sn/io/xtalk.c | 2 -
arch/m68knommu/platform/68328/entry.S | 2 -
arch/m68knommu/platform/68360/commproc.c | 2 -
arch/m68knommu/platform/68360/entry.S | 2 -
arch/mips/philips/nino/int-handler.S | 2 -
arch/parisc/kernel/irq.c | 2 -
arch/ppc64/kernel/head.S | 6 ++---
arch/s390/kernel/entry.S | 4 +--
arch/s390x/kernel/entry.S | 4 +--
arch/v850/kernel/rte_cb_multi.c | 2 -
drivers/char/ip2/i2ellis.h | 2 -
drivers/char/ipmi/ipmi_kcs_intf.c | 2 -
drivers/char/mwave/3780i.c | 2 -
drivers/input/serio/i8042.c | 2 -
drivers/net/au1000_eth.c | 2 -
drivers/net/natsemi.c | 2 -
drivers/net/tc35815.c | 2 -
drivers/net/tulip/interrupt.c | 2 -
drivers/net/wireless/orinoco.c | 2 -
drivers/parisc/dino.c | 2 -
drivers/scsi/aic7xxx/aic79xx.h | 2 -
drivers/scsi/aic7xxx/aic79xx_pci.c | 6 ++---
drivers/scsi/pci2220i.c | 2 -
include/asm-alpha/core_marvel.h | 2 -
include/asm-m68knommu/m68360_enet.h | 2 -
include/asm-parisc/pdcpat.h | 2 -
sound/drivers/serial-u16550.c | 34 +++++++++++++++----------------
sound/oss/rme96xx.c | 2 -
sound/pci/als4000.c | 2 -
sound/pci/cs4281.c | 2 -
sound/pci/es1968.c | 6 ++---
36 files changed, 61 insertions(+), 61 deletions(-)
diff -ur linux-2.5.62-1104-orig/Documentation/s390/Debugging390.txt linux-2.5.62-1104/Documentation/s390/Debugging390.txt
--- linux-2.5.62-1104-orig/Documentation/s390/Debugging390.txt Mon Feb 17 17:35:58 2003
+++ linux-2.5.62-1104/Documentation/s390/Debugging390.txt Tue Feb 18 18:31:36 2003
@@ -97,7 +97,7 @@
6 6 Input/Output interrupt Mask
7 7 External interrupt Mask used primarily for interprocessor signalling &
- clock interupts.
+ clock interrupts.
8-11 8-11 PSW Key used for complex memory protection mechanism not used under linux
@@ -2423,7 +2423,7 @@
There is a new device layer for channel devices, some
drivers e.g. lcs are registered with this layer.
If the device uses the channel device layer you'll be
-able to find what interupts it uses & the current state
+able to find what interrupts it uses & the current state
of the device.
See the manpage chandev.8 &type cat /proc/chandev for more info.
diff -ur linux-2.5.62-1104-orig/Documentation/sysrq.txt linux-2.5.62-1104/Documentation/sysrq.txt
--- linux-2.5.62-1104-orig/Documentation/sysrq.txt Thu Jan 16 19:22:09 2003
+++ linux-2.5.62-1104/Documentation/sysrq.txt Tue Feb 18 18:31:36 2003
@@ -164,7 +164,7 @@
If for some reason you feel the need to call the handle_sysrq function from
within a function called by handle_sysrq, you must be aware that you are in
-a lock (you are also in an interupt handler, which means don't sleep!), so
+a lock (you are also in an interrupt handler, which means don't sleep!), so
you must call __handle_sysrq_nolock instead.
* I have more questions, who can I ask?
diff -ur linux-2.5.62-1104-orig/arch/cris/drivers/serial.c linux-2.5.62-1104/arch/cris/drivers/serial.c
--- linux-2.5.62-1104-orig/arch/cris/drivers/serial.c Mon Feb 10 12:22:53 2003
+++ linux-2.5.62-1104/arch/cris/drivers/serial.c Tue Feb 18 18:31:36 2003
@@ -1904,7 +1904,7 @@
}
#ifdef SERIAL_DEBUG_INTR
- printk("** OK, disabling ser_interupts\n");
+ printk("** OK, disabling ser_interrupts\n");
#endif
e100_disable_serial_data_irq(info);
diff -ur linux-2.5.62-1104-orig/arch/ia64/hp/sim/simeth.c linux-2.5.62-1104/arch/ia64/hp/sim/simeth.c
--- linux-2.5.62-1104-orig/arch/ia64/hp/sim/simeth.c Mon Feb 10 12:22:53 2003
+++ linux-2.5.62-1104/arch/ia64/hp/sim/simeth.c Tue Feb 18 18:31:36 2003
@@ -149,7 +149,7 @@
static inline int
netdev_attach(int fd, int irq, unsigned int ipaddr)
{
- /* this puts the host interface in the right mode (start interupting) */
+ /* this puts the host interface in the right mode (start interrupting) */
return ia64_ssc(fd, ipaddr, 0,0, SSC_NETDEV_ATTACH);
}
diff -ur linux-2.5.62-1104-orig/arch/ia64/sn/io/xbow.c linux-2.5.62-1104/arch/ia64/sn/io/xbow.c
--- linux-2.5.62-1104-orig/arch/ia64/sn/io/xbow.c Thu Jan 16 19:21:33 2003
+++ linux-2.5.62-1104/arch/ia64/sn/io/xbow.c Tue Feb 18 18:31:36 2003
@@ -305,7 +305,7 @@
/*
* get the name of this xbow vertex and keep the info.
- * This is needed during errors and interupts, but as
+ * This is needed during errors and interrupts, but as
* long as we have it, we can use it elsewhere.
*/
s = dev_to_name(vhdl, devnm, MAXDEVNAME);
diff -ur linux-2.5.62-1104-orig/arch/ia64/sn/io/xtalk.c linux-2.5.62-1104/arch/ia64/sn/io/xtalk.c
--- linux-2.5.62-1104-orig/arch/ia64/sn/io/xtalk.c Thu Jan 16 19:21:40 2003
+++ linux-2.5.62-1104/arch/ia64/sn/io/xtalk.c Tue Feb 18 18:31:36 2003
@@ -890,7 +890,7 @@
widget_info->w_einfo = 0;
/*
* get the name of this xwidget vertex and keep the info.
- * This is needed during errors and interupts, but as
+ * This is needed during errors and interrupts, but as
* long as we have it, we can use it elsewhere.
*/
s = dev_to_name(widget,devnm,MAXDEVNAME);
diff -ur linux-2.5.62-1104-orig/arch/m68knommu/platform/68328/entry.S linux-2.5.62-1104/arch/m68knommu/platform/68328/entry.S
--- linux-2.5.62-1104-orig/arch/m68knommu/platform/68328/entry.S Thu Jan 16 19:21:38 2003
+++ linux-2.5.62-1104/arch/m68knommu/platform/68328/entry.S Tue Feb 18 18:31:36 2003
@@ -95,7 +95,7 @@
Luser_return:
/* only allow interrupts when we are really the last one on the*/
/* kernel stack, otherwise stack overflow can occur during*/
- /* heavy interupt load*/
+ /* heavy interrupt load*/
andw #ALLOWINT,%sr
movel %sp,%d1 /* get thread_info pointer */
diff -ur linux-2.5.62-1104-orig/arch/m68knommu/platform/68360/commproc.c linux-2.5.62-1104/arch/m68knommu/platform/68360/commproc.c
--- linux-2.5.62-1104-orig/arch/m68knommu/platform/68360/commproc.c Thu Jan 16 19:22:39 2003
+++ linux-2.5.62-1104/arch/m68knommu/platform/68360/commproc.c Tue Feb 18 18:31:36 2003
@@ -90,7 +90,7 @@
while (pquicc->cp_cr & CMD_FLAG);
/* On the recommendation of the 68360 manual, p. 7-60
- * - Set sdma interupt service mask to 7
+ * - Set sdma interrupt service mask to 7
* - Set sdma arbitration ID to 4
*/
pquicc->sdma_sdcr = 0x0740;
diff -ur linux-2.5.62-1104-orig/arch/m68knommu/platform/68360/entry.S linux-2.5.62-1104/arch/m68knommu/platform/68360/entry.S
--- linux-2.5.62-1104-orig/arch/m68knommu/platform/68360/entry.S Thu Jan 16 19:22:24 2003
+++ linux-2.5.62-1104/arch/m68knommu/platform/68360/entry.S Tue Feb 18 18:31:36 2003
@@ -91,7 +91,7 @@
Luser_return:
/* only allow interrupts when we are really the last one on the*/
/* kernel stack, otherwise stack overflow can occur during*/
- /* heavy interupt load*/
+ /* heavy interrupt load*/
andw #ALLOWINT,%sr
movel %sp,%d1 /* get thread_info pointer */
diff -ur linux-2.5.62-1104-orig/arch/mips/philips/nino/int-handler.S linux-2.5.62-1104/arch/mips/philips/nino/int-handler.S
--- linux-2.5.62-1104-orig/arch/mips/philips/nino/int-handler.S Thu Jan 16 19:21:35 2003
+++ linux-2.5.62-1104/arch/mips/philips/nino/int-handler.S Tue Feb 18 18:31:36 2003
@@ -72,7 +72,7 @@
nop
/*
- * Ok, we've got one of over a hundred other interupts.
+ * Ok, we've got one of over a hundred other interrupts.
*/
low_priority:
lui t0, %hi(IntStatus1)
diff -ur linux-2.5.62-1104-orig/arch/parisc/kernel/irq.c linux-2.5.62-1104/arch/parisc/kernel/irq.c
--- linux-2.5.62-1104-orig/arch/parisc/kernel/irq.c Mon Feb 10 12:22:56 2003
+++ linux-2.5.62-1104/arch/parisc/kernel/irq.c Tue Feb 18 18:31:36 2003
@@ -447,7 +447,7 @@
/* 1) only process IRQs that are enabled/unmasked (cpu_eiem)
* 2) We loop here on EIRR contents in order to avoid
- * nested interrupts or having to take another interupt
+ * nested interrupts or having to take another interrupt
* when we could have just handled it right away.
* 3) Limit the number of times we loop to make sure other
* processing can occur.
diff -ur linux-2.5.62-1104-orig/arch/ppc64/kernel/head.S linux-2.5.62-1104/arch/ppc64/kernel/head.S
--- linux-2.5.62-1104-orig/arch/ppc64/kernel/head.S Mon Feb 10 12:22:56 2003
+++ linux-2.5.62-1104/arch/ppc64/kernel/head.S Tue Feb 18 18:31:36 2003
@@ -337,8 +337,8 @@
* Start of pSeries system interrupt routines
*/
. = 0x100
- .globl __start_interupts
-__start_interupts:
+ .globl __start_interrupts
+__start_interrupts:
STD_EXCEPTION_PSERIES( 0x100, SystemReset )
STD_EXCEPTION_PSERIES( 0x200, MachineCheck )
@@ -367,7 +367,7 @@
. = 0x4000
.globl __end_interrupts
.globl __start_naca
-__end_interupts:
+__end_interrupts:
__start_naca:
#ifdef CONFIG_PPC_ISERIES
.llong itVpdAreas
diff -ur linux-2.5.62-1104-orig/arch/s390/kernel/entry.S linux-2.5.62-1104/arch/s390/kernel/entry.S
--- linux-2.5.62-1104-orig/arch/s390/kernel/entry.S Thu Jan 16 19:21:41 2003
+++ linux-2.5.62-1104/arch/s390/kernel/entry.S Tue Feb 18 18:31:36 2003
@@ -757,8 +757,8 @@
la %r2,SP_PTREGS(%r15) # address of register-save area
sr %r3,%r3
icm %r3,3,__LC_SUBCHANNEL_NR # load subchannel nr & extend to int
- l %r4,__LC_IO_INT_PARM # load interuption parm
- l %r5,__LC_IO_INT_WORD # load interuption word
+ l %r4,__LC_IO_INT_PARM # load interruption parm
+ l %r5,__LC_IO_INT_WORD # load interruption word
basr %r14,%r1 # branch to standard irq handler
io_return:
diff -ur linux-2.5.62-1104-orig/arch/s390x/kernel/entry.S linux-2.5.62-1104/arch/s390x/kernel/entry.S
--- linux-2.5.62-1104-orig/arch/s390x/kernel/entry.S Mon Feb 17 17:36:00 2003
+++ linux-2.5.62-1104/arch/s390x/kernel/entry.S Tue Feb 18 18:31:36 2003
@@ -781,8 +781,8 @@
GET_THREAD_INFO # load pointer to task_struct to R9
la %r2,SP_PTREGS(%r15) # address of register-save area
llgh %r3,__LC_SUBCHANNEL_NR # load subchannel number
- llgf %r4,__LC_IO_INT_PARM # load interuption parm
- llgf %r5,__LC_IO_INT_WORD # load interuption word
+ llgf %r4,__LC_IO_INT_PARM # load interruption parm
+ llgf %r5,__LC_IO_INT_WORD # load interruption word
brasl %r14,do_IRQ # call standard irq handler
io_return:
diff -ur linux-2.5.62-1104-orig/arch/v850/kernel/rte_cb_multi.c linux-2.5.62-1104/arch/v850/kernel/rte_cb_multi.c
--- linux-2.5.62-1104-orig/arch/v850/kernel/rte_cb_multi.c Thu Jan 16 19:21:51 2003
+++ linux-2.5.62-1104/arch/v850/kernel/rte_cb_multi.c Tue Feb 18 18:31:36 2003
@@ -52,7 +52,7 @@
register unsigned long jr_fixup = (char *)&_intv_start - (char *)dst;
register long *ii;
- /* Copy interupt vectors as instructed by multi_intv_install_table. */
+ /* Copy interrupt vectors as instructed by multi_intv_install_table. */
for (ii = multi_intv_install_table; *ii >= 0; ii++) {
/* Copy 16-byte interrupt vector at offset *ii. */
int boffs;
diff -ur linux-2.5.62-1104-orig/drivers/char/ip2/i2ellis.h linux-2.5.62-1104/drivers/char/ip2/i2ellis.h
--- linux-2.5.62-1104-orig/drivers/char/ip2/i2ellis.h Thu Jan 16 19:21:37 2003
+++ linux-2.5.62-1104/drivers/char/ip2/i2ellis.h Tue Feb 18 18:31:36 2003
@@ -400,7 +400,7 @@
rwlock_t read_fifo_spinlock;
rwlock_t write_fifo_spinlock;
-// For queuing interupt bottom half handlers. /\/\|=mhw=|\/\/
+// For queuing interrupt bottom half handlers. /\/\|=mhw=|\/\/
struct work_struct tqueue_interrupt;
struct timer_list SendPendingTimer; // Used by iiSendPending
diff -ur linux-2.5.62-1104-orig/drivers/char/ipmi/ipmi_kcs_intf.c linux-2.5.62-1104/drivers/char/ipmi/ipmi_kcs_intf.c
--- linux-2.5.62-1104-orig/drivers/char/ipmi/ipmi_kcs_intf.c Thu Jan 16 19:21:33 2003
+++ linux-2.5.62-1104/drivers/char/ipmi/ipmi_kcs_intf.c Tue Feb 18 18:31:36 2003
@@ -128,7 +128,7 @@
/* The driver will disable interrupts when it gets into a
situation where it cannot handle messages due to lack of
memory. Once that situation clears up, it will re-enable
- interupts. */
+ interrupts. */
int interrupt_disabled;
};
diff -ur linux-2.5.62-1104-orig/drivers/char/mwave/3780i.c linux-2.5.62-1104/drivers/char/mwave/3780i.c
--- linux-2.5.62-1104-orig/drivers/char/mwave/3780i.c Thu Jan 16 19:22:43 2003
+++ linux-2.5.62-1104/drivers/char/mwave/3780i.c Tue Feb 18 18:31:36 2003
@@ -698,7 +698,7 @@
usDspBaseIO, pusIPCSource);
/*
- * Disable DSP to PC interrupts, read the interupt register,
+ * Disable DSP to PC interrupts, read the interrupt register,
* clear the pending IPC bits, and reenable DSP to PC interrupts
*/
spin_lock_irqsave(&dsp_lock, flags);
diff -ur linux-2.5.62-1104-orig/drivers/input/serio/i8042.c linux-2.5.62-1104/drivers/input/serio/i8042.c
--- linux-2.5.62-1104-orig/drivers/input/serio/i8042.c Fri Feb 14 20:11:57 2003
+++ linux-2.5.62-1104/drivers/input/serio/i8042.c Tue Feb 18 18:31:36 2003
@@ -257,7 +257,7 @@
/*
* i8042_close() frees the interrupt, so that it can possibly be used
* by another driver. We never know - if the user doesn't have a mouse,
- * the BIOS could have used the AUX interupt for PCI.
+ * the BIOS could have used the AUX interrupt for PCI.
*/
static void i8042_close(struct serio *port)
diff -ur linux-2.5.62-1104-orig/drivers/net/au1000_eth.c linux-2.5.62-1104/drivers/net/au1000_eth.c
--- linux-2.5.62-1104-orig/drivers/net/au1000_eth.c Thu Jan 16 19:22:14 2003
+++ linux-2.5.62-1104/drivers/net/au1000_eth.c Tue Feb 18 18:31:36 2003
@@ -110,7 +110,7 @@
/*
- * Base address and interupt of the Au1xxx ethernet macs
+ * Base address and interrupt of the Au1xxx ethernet macs
*/
static struct {
unsigned int port;
diff -ur linux-2.5.62-1104-orig/drivers/net/natsemi.c linux-2.5.62-1104/drivers/net/natsemi.c
--- linux-2.5.62-1104-orig/drivers/net/natsemi.c Thu Jan 16 19:21:37 2003
+++ linux-2.5.62-1104/drivers/net/natsemi.c Tue Feb 18 18:31:36 2003
@@ -2608,7 +2608,7 @@
if (wol) {
/* restart the NIC in WOL mode.
* The nic must be stopped for this.
- * FIXME: use the WOL interupt
+ * FIXME: use the WOL interrupt
*/
enable_wol_mode(dev, 0);
} else {
diff -ur linux-2.5.62-1104-orig/drivers/net/tc35815.c linux-2.5.62-1104/drivers/net/tc35815.c
--- linux-2.5.62-1104-orig/drivers/net/tc35815.c Thu Jan 16 19:21:34 2003
+++ linux-2.5.62-1104/drivers/net/tc35815.c Tue Feb 18 18:31:36 2003
@@ -1227,7 +1227,7 @@
lp->rfd_cur = next_rfd;
}
- /* re-enable BL/FDA Exhaust interupts. */
+ /* re-enable BL/FDA Exhaust interrupts. */
if (fd_free_count) {
tc_writel(tc_readl(&tr->Int_En) | Int_FDAExEn, &tr->Int_En);
if (buf_free_count)
diff -ur linux-2.5.62-1104-orig/drivers/net/tulip/interrupt.c linux-2.5.62-1104/drivers/net/tulip/interrupt.c
--- linux-2.5.62-1104-orig/drivers/net/tulip/interrupt.c Thu Jan 16 19:21:47 2003
+++ linux-2.5.62-1104/drivers/net/tulip/interrupt.c Tue Feb 18 18:31:36 2003
@@ -501,7 +501,7 @@
dev->name, csr5);
#ifdef CONFIG_NET_HW_FLOWCONTROL
if (tp->fc_bit && (test_bit(tp->fc_bit, &netdev_fc_xoff)))
- if (net_ratelimit()) printk("BUG!! enabling interupt when FC off (timerintr.) \n");
+ if (net_ratelimit()) printk("BUG!! enabling interrupt when FC off (timerintr.) \n");
#endif
outl(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
tp->ttimer = 0;
diff -ur linux-2.5.62-1104-orig/drivers/net/wireless/orinoco.c linux-2.5.62-1104/drivers/net/wireless/orinoco.c
--- linux-2.5.62-1104-orig/drivers/net/wireless/orinoco.c Fri Feb 14 20:11:59 2003
+++ linux-2.5.62-1104/drivers/net/wireless/orinoco.c Tue Feb 18 18:31:36 2003
@@ -289,7 +289,7 @@
* which are used as the dev->open, dev->stop, priv->reset
* callbacks if none are specified when alloc_orinocodev() is
* called.
- * o Removed orinoco_plx_interupt() and orinoco_pci_interrupt().
+ * o Removed orinoco_plx_interrupt() and orinoco_pci_interrupt().
* They didn't do anything.
*
* v0.12 -> v0.12a - 4 Jul 2002 - David Gibson
diff -ur linux-2.5.62-1104-orig/drivers/parisc/dino.c linux-2.5.62-1104/drivers/parisc/dino.c
--- linux-2.5.62-1104-orig/drivers/parisc/dino.c Thu Jan 16 19:21:37 2003
+++ linux-2.5.62-1104/drivers/parisc/dino.c Tue Feb 18 18:31:36 2003
@@ -403,7 +403,7 @@
/*
* Perform a binary search on set bits.
- * `Less than Fatal' and PS2 interupts aren't supported.
+ * `Less than Fatal' and PS2 interrupts aren't supported.
*/
if (mask & 0xf) {
if (mask & 0x3) {
diff -ur linux-2.5.62-1104-orig/drivers/scsi/aic7xxx/aic79xx.h linux-2.5.62-1104/drivers/scsi/aic7xxx/aic79xx.h
--- linux-2.5.62-1104-orig/drivers/scsi/aic7xxx/aic79xx.h Thu Jan 16 19:22:23 2003
+++ linux-2.5.62-1104/drivers/scsi/aic7xxx/aic79xx.h Tue Feb 18 18:31:36 2003
@@ -404,7 +404,7 @@
* Initiator mode SCB shared data area.
* If the embedded CDB is 12 bytes or less, we embed
* the sense buffer address in the SCB. This allows
- * us to retrieve sense information without interupting
+ * us to retrieve sense information without interrupting
* the host in packetized mode.
*/
typedef uint32_t sense_addr_t;
diff -ur linux-2.5.62-1104-orig/drivers/scsi/aic7xxx/aic79xx_pci.c linux-2.5.62-1104/drivers/scsi/aic7xxx/aic79xx_pci.c
--- linux-2.5.62-1104-orig/drivers/scsi/aic7xxx/aic79xx_pci.c Fri Feb 14 20:11:59 2003
+++ linux-2.5.62-1104/drivers/scsi/aic7xxx/aic79xx_pci.c Tue Feb 18 18:31:36 2003
@@ -740,7 +740,7 @@
if (i == 5)
continue;
pci_status[i] = ahd_inb(ahd, reg);
- /* Clear latched errors. So our interupt deasserts. */
+ /* Clear latched errors. So our interrupt deasserts. */
ahd_outb(ahd, reg, pci_status[i]);
}
@@ -796,14 +796,14 @@
split_status[i] = ahd_inb(ahd, DCHSPLTSTAT0);
split_status1[i] = ahd_inb(ahd, DCHSPLTSTAT1);
- /* Clear latched errors. So our interupt deasserts. */
+ /* Clear latched errors. So our interrupt deasserts. */
ahd_outb(ahd, DCHSPLTSTAT0, split_status[i]);
ahd_outb(ahd, DCHSPLTSTAT1, split_status1[i]);
if (i != 0)
continue;
sg_split_status[i] = ahd_inb(ahd, SGSPLTSTAT0);
sg_split_status1[i] = ahd_inb(ahd, SGSPLTSTAT1);
- /* Clear latched errors. So our interupt deasserts. */
+ /* Clear latched errors. So our interrupt deasserts. */
ahd_outb(ahd, SGSPLTSTAT0, sg_split_status[i]);
ahd_outb(ahd, SGSPLTSTAT1, sg_split_status1[i]);
}
diff -ur linux-2.5.62-1104-orig/drivers/scsi/pci2220i.c linux-2.5.62-1104/drivers/scsi/pci2220i.c
--- linux-2.5.62-1104-orig/drivers/scsi/pci2220i.c Tue Feb 18 18:06:18 2003
+++ linux-2.5.62-1104/drivers/scsi/pci2220i.c Tue Feb 18 18:31:36 2003
@@ -2389,7 +2389,7 @@
padapter->regRemap = zr + RTR_LOCAL_REMAP; // 32 bit local space remap
padapter->regDesc = zr + RTR_REGIONS; // 32 bit local region descriptor
padapter->regRange = zr + RTR_LOCAL_RANGE; // 32 bit local range
- padapter->regIrqControl = zr + RTR_INT_CONTROL_STATUS; // 16 bit interupt control and status
+ padapter->regIrqControl = zr + RTR_INT_CONTROL_STATUS; // 16 bit interrupt control and status
padapter->regScratchPad = zr + RTR_MAILBOX; // 16 byte scratchpad I/O base address
padapter->regBase = zl;
diff -ur linux-2.5.62-1104-orig/include/asm-alpha/core_marvel.h linux-2.5.62-1104/include/asm-alpha/core_marvel.h
--- linux-2.5.62-1104-orig/include/asm-alpha/core_marvel.h Thu Jan 16 19:21:48 2003
+++ linux-2.5.62-1104/include/asm-alpha/core_marvel.h Tue Feb 18 18:31:36 2003
@@ -222,7 +222,7 @@
/*
* IO7 IID (Interrupt IDentifier) format
*
- * For level-sensative interupts, int_num is encoded as:
+ * For level-sensative interrupts, int_num is encoded as:
*
* bus/port slot/device INTx
* <7:5> <4:2> <1:0>
diff -ur linux-2.5.62-1104-orig/include/asm-m68knommu/m68360_enet.h linux-2.5.62-1104/include/asm-m68knommu/m68360_enet.h
--- linux-2.5.62-1104-orig/include/asm-m68knommu/m68360_enet.h Thu Jan 16 19:22:03 2003
+++ linux-2.5.62-1104/include/asm-m68knommu/m68360_enet.h Tue Feb 18 18:31:36 2003
@@ -93,7 +93,7 @@
#define ALEC 0x00000000
#define DISFC 0x00000000
#define PADS 0x00000000
-#define RET_LIM 0x000f /* retry 15 times to send a frame before interupt */
+#define RET_LIM 0x000f /* retry 15 times to send a frame before interrupt */
#define ETH_MFLR 0x05ee /* 1518 max frame size */
#define MINFLR 0x0040 /* Minimum frame size 64 */
#define MAXD1 0x05ee /* Max dma count 1518 */
diff -ur linux-2.5.62-1104-orig/include/asm-parisc/pdcpat.h linux-2.5.62-1104/include/asm-parisc/pdcpat.h
--- linux-2.5.62-1104-orig/include/asm-parisc/pdcpat.h Thu Jan 16 19:22:29 2003
+++ linux-2.5.62-1104/include/asm-parisc/pdcpat.h Tue Feb 18 18:31:36 2003
@@ -99,7 +99,7 @@
** Monarch Processor */
#define PDC_PAT_HPMC_RENDEZ_CPU 0L /* go into spin loop */
#define PDC_PAT_HPMC_SET_PARAMS 1L /* Allows OS to specify intr which PDC
- * will use to interupt OS during machine
+ * will use to interrupt OS during machine
* check rendezvous */
/* parameters for PDC_PAT_HPMC_SET_PARAMS: */
diff -ur linux-2.5.62-1104-orig/sound/drivers/serial-u16550.c linux-2.5.62-1104/sound/drivers/serial-u16550.c
--- linux-2.5.62-1104-orig/sound/drivers/serial-u16550.c Mon Feb 10 12:23:09 2003
+++ linux-2.5.62-1104/sound/drivers/serial-u16550.c Tue Feb 18 18:31:36 2003
@@ -204,7 +204,7 @@
/* This loop should be called with interrupts disabled
* We don't want to interrupt this,
- * as we're already handling an interupt
+ * as we're already handling an interrupt
*/
static void snd_uart16550_io_loop(snd_uart16550_t * uart)
{
@@ -274,16 +274,16 @@
* ---------------------------
* After receiving a interrupt, it is important to indicate to the UART that
* this has been done.
- * For a Rx interupt, this is done by reading the received byte.
- * For a Tx interupt this is done by either:
+ * For a Rx interrupt, this is done by reading the received byte.
+ * For a Tx interrupt this is done by either:
* a) Writing a byte
* b) Reading the IIR
- * It is particularly important to read the IIR if a Tx interupt is received
+ * It is particularly important to read the IIR if a Tx interrupt is received
* when there is no data in tx_buff[], as in this case there no other
- * indication that the interupt has been serviced, and it remains outstanding
- * indefinitely. This has the curious side effect that and no further interupts
+ * indication that the interrupt has been serviced, and it remains outstanding
+ * indefinitely. This has the curious side effect that and no further interrupts
* will be generated from this device AT ALL!!.
- * It is also desirable to clear outstanding interupts when the device is
+ * It is also desirable to clear outstanding interrupts when the device is
* opened/closed.
*
*
@@ -300,7 +300,7 @@
spin_unlock(&uart->open_lock);
return;
}
- inb(uart->base + UART_IIR); /* indicate to the UART that the interupt has been serviced */
+ inb(uart->base + UART_IIR); /* indicate to the UART that the interrupt has been serviced */
snd_uart16550_io_loop(uart);
spin_unlock(&uart->open_lock);
}
@@ -378,7 +378,7 @@
| UART_FCR_CLEAR_RCVR /* Clear receiver FIFO */
| UART_FCR_CLEAR_XMIT /* Clear transmitter FIFO */
| UART_FCR_TRIGGER_4 /* Set FIFO trigger at 4-bytes */
- /* NOTE: interupt generated after T=(time)4-bytes
+ /* NOTE: interrupt generated after T=(time)4-bytes
* if less than UART_FCR_TRIGGER bytes received
*/
,uart->base + UART_FCR); /* FIFO Control Register */
@@ -430,8 +430,8 @@
}
if (uart->irq < 0) {
- byte = (0 & UART_IER_RDI) /* Disable Receiver data interupt */
- |(0 & UART_IER_THRI) /* Disable Transmitter holding register empty interupt */
+ byte = (0 & UART_IER_RDI) /* Disable Receiver data interrupt */
+ |(0 & UART_IER_THRI) /* Disable Transmitter holding register empty interrupt */
;
} else if (uart->adaptor == SNDRV_SERIAL_MS124W_SA) {
byte = UART_IER_RDI /* Enable Receiver data interrupt */
@@ -440,11 +440,11 @@
} else if (uart->adaptor == SNDRV_SERIAL_GENERIC) {
byte = UART_IER_RDI /* Enable Receiver data interrupt */
| UART_IER_MSI /* Enable Modem status interrupt */
- | UART_IER_THRI /* Enable Transmitter holding register empty interupt */
+ | UART_IER_THRI /* Enable Transmitter holding register empty interrupt */
;
} else {
- byte = UART_IER_RDI /* Enable Receiver data interupt */
- | UART_IER_THRI /* Enable Transmitter holding register empty interupt */
+ byte = UART_IER_RDI /* Enable Receiver data interrupt */
+ | UART_IER_THRI /* Enable Transmitter holding register empty interrupt */
;
}
outb(byte, uart->base + UART_IER); /* Interupt enable Register */
@@ -463,8 +463,8 @@
* For now, the consequences are harmless.
*/
- outb((0 & UART_IER_RDI) /* Disable Receiver data interupt */
- |(0 & UART_IER_THRI) /* Disable Transmitter holding register empty interupt */
+ outb((0 & UART_IER_RDI) /* Disable Receiver data interrupt */
+ |(0 & UART_IER_THRI) /* Disable Transmitter holding register empty interrupt */
,uart->base + UART_IER); /* Interupt enable Register */
switch (uart->adaptor) {
@@ -489,7 +489,7 @@
break;
}
- inb(uart->base + UART_IIR); /* Clear any outstanding interupts */
+ inb(uart->base + UART_IIR); /* Clear any outstanding interrupts */
/* Restore old divisor */
if (uart->divisor != 0) {
diff -ur linux-2.5.62-1104-orig/sound/oss/rme96xx.c linux-2.5.62-1104/sound/oss/rme96xx.c
--- linux-2.5.62-1104-orig/sound/oss/rme96xx.c Fri Feb 14 20:12:06 2003
+++ linux-2.5.62-1104/sound/oss/rme96xx.c Tue Feb 18 18:31:36 2003
@@ -604,7 +604,7 @@
return 1;
}
}
- COMM ("interupt disabled");
+ COMM ("interrupt disabled");
/* first initialize all pointers on card */
for(i=0;i<RME96xx_num_of_init_regs;i++){
writel(0,s->iobase + i);
diff -ur linux-2.5.62-1104-orig/sound/pci/als4000.c linux-2.5.62-1104/sound/pci/als4000.c
--- linux-2.5.62-1104-orig/sound/pci/als4000.c Thu Jan 16 19:22:44 2003
+++ linux-2.5.62-1104/sound/pci/als4000.c Tue Feb 18 18:31:36 2003
@@ -370,7 +370,7 @@
snd_pcm_period_elapsed(chip->playback_substream);
if ((gcr_status & 0x40) && (chip->capture_substream)) /* capturing */
snd_pcm_period_elapsed(chip->capture_substream);
- if ((gcr_status & 0x10) && (chip->rmidi)) /* MPU401 interupt */
+ if ((gcr_status & 0x10) && (chip->rmidi)) /* MPU401 interrupt */
snd_mpu401_uart_interrupt(irq, chip->rmidi, regs);
/* release the gcr */
outb(gcr_status, chip->alt_port + 0xe);
diff -ur linux-2.5.62-1104-orig/sound/pci/cs4281.c linux-2.5.62-1104/sound/pci/cs4281.c
--- linux-2.5.62-1104-orig/sound/pci/cs4281.c Mon Feb 10 12:23:10 2003
+++ linux-2.5.62-1104/sound/pci/cs4281.c Tue Feb 18 18:31:36 2003
@@ -87,7 +87,7 @@
#define BA0_HISR_MIDI (1<<22) /* MIDI port interrupt */
#define BA0_HISR_FIFOI (1<<20) /* FIFO polled interrupt */
#define BA0_HISR_DMAI (1<<18) /* DMA interrupt (half or end) */
-#define BA0_HISR_FIFO(c) (1<<(12+(c))) /* FIFO channel interupt */
+#define BA0_HISR_FIFO(c) (1<<(12+(c))) /* FIFO channel interrupt */
#define BA0_HISR_DMA(c) (1<<(8+(c))) /* DMA channel interrupt */
#define BA0_HISR_GPPI (1<<5) /* General Purpose Input (Primary chip) */
#define BA0_HISR_GPSI (1<<4) /* General Purpose Input (Secondary chip) */
diff -ur linux-2.5.62-1104-orig/sound/pci/es1968.c linux-2.5.62-1104/sound/pci/es1968.c
--- linux-2.5.62-1104-orig/sound/pci/es1968.c Mon Feb 10 12:23:10 2003
+++ linux-2.5.62-1104/sound/pci/es1968.c Tue Feb 18 18:31:36 2003
@@ -1132,7 +1132,7 @@
}
spin_lock_irqsave(&chip->reg_lock, flags);
- /* clear WP interupts */
+ /* clear WP interrupts */
outw(1, chip->io_port + 0x04);
/* enable WP ints */
outw(inw(chip->io_port + ESM_PORT_HOST_IRQ) | ESM_HIRQ_DSIE, chip->io_port + ESM_PORT_HOST_IRQ);
@@ -1263,7 +1263,7 @@
}
spin_lock_irqsave(&chip->reg_lock, flags);
- /* clear WP interupts */
+ /* clear WP interrupts */
outw(1, chip->io_port + 0x04);
/* enable WP ints */
outw(inw(chip->io_port + ESM_PORT_HOST_IRQ) | ESM_HIRQ_DSIE, chip->io_port + ESM_PORT_HOST_IRQ);
@@ -1828,7 +1828,7 @@
apu_set_register(chip, apu, 10, 0x8F08);
apu_set_register(chip, apu, 11, 0x0000);
spin_lock_irqsave(&chip->reg_lock, flags);
- outw(1, chip->io_port + 0x04); /* clear WP interupts */
+ outw(1, chip->io_port + 0x04); /* clear WP interrupts */
outw(inw(chip->io_port + ESM_PORT_HOST_IRQ) | ESM_HIRQ_DSIE, chip->io_port + ESM_PORT_HOST_IRQ); /* enable WP ints */
spin_unlock_irqrestore(&chip->reg_lock, flags);
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-02-19 2:59 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-02-19 2:59 [PATCH] 2.5.62 spelling fix for interupt -> interrupt in 36 files Steven Cole
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®