* [PATCH] 2.5.62 spelling fix for propogate -> propagate in 13 files.
@ 2003-02-19 2:59 Steven Cole
0 siblings, 0 replies; only message in thread
From: Steven Cole @ 2003-02-19 2:59 UTC (permalink / raw)
To: Linus Torvalds; +Cc: LKML
This patch provides the following spelling fix.
propogate -> propagate
arch/m68k/ifpsp060/src/fpsp.S | 4 ++--
arch/m68k/ifpsp060/src/pfpsp.S | 4 ++--
arch/m68k/kernel/head.S | 2 +-
arch/mips/ddb5xxx/common/pci.c | 2 +-
arch/mips/kernel/pci.c | 2 +-
drivers/block/floppy.c | 2 +-
drivers/char/epca.c | 4 ++--
drivers/ide/setup-pci.c | 2 +-
drivers/parisc/lba_pci.c | 2 +-
drivers/scsi/53c7xx.c | 2 +-
include/net/sctp/ulpqueue.h | 2 +-
net/sctp/ulpqueue.c | 2 +-
sound/oss/maestro.c | 2 +-
13 files changed, 16 insertions(+), 16 deletions(-)
diff -ur linux-2.5.62-1104-orig/arch/m68k/ifpsp060/src/fpsp.S linux-2.5.62-1104/arch/m68k/ifpsp060/src/fpsp.S
--- linux-2.5.62-1104-orig/arch/m68k/ifpsp060/src/fpsp.S Thu Jan 16 19:22:53 2003
+++ linux-2.5.62-1104/arch/m68k/ifpsp060/src/fpsp.S Tue Feb 18 18:44:43 2003
@@ -22147,7 +22147,7 @@
add_ext:
addq.l &1,FTEMP_LO(%a0) # add 1 to l-bit
bcc.b xcc_clr # test for carry out
- addq.l &1,FTEMP_HI(%a0) # propogate carry
+ addq.l &1,FTEMP_HI(%a0) # propagate carry
bcc.b xcc_clr
roxr.w FTEMP_HI(%a0) # mant is 0 so restore v-bit
roxr.w FTEMP_HI+2(%a0) # mant is 0 so restore v-bit
@@ -22167,7 +22167,7 @@
add_dbl:
add.l &ad_1_dbl, FTEMP_LO(%a0) # add 1 to lsb
bcc.b dcc_clr # no carry
- addq.l &0x1, FTEMP_HI(%a0) # propogate carry
+ addq.l &0x1, FTEMP_HI(%a0) # propagate carry
bcc.b dcc_clr # no carry
roxr.w FTEMP_HI(%a0) # mant is 0 so restore v-bit
diff -ur linux-2.5.62-1104-orig/arch/m68k/ifpsp060/src/pfpsp.S linux-2.5.62-1104/arch/m68k/ifpsp060/src/pfpsp.S
--- linux-2.5.62-1104-orig/arch/m68k/ifpsp060/src/pfpsp.S Thu Jan 16 19:21:38 2003
+++ linux-2.5.62-1104/arch/m68k/ifpsp060/src/pfpsp.S Tue Feb 18 18:44:43 2003
@@ -6269,7 +6269,7 @@
add_ext:
addq.l &1,FTEMP_LO(%a0) # add 1 to l-bit
bcc.b xcc_clr # test for carry out
- addq.l &1,FTEMP_HI(%a0) # propogate carry
+ addq.l &1,FTEMP_HI(%a0) # propagate carry
bcc.b xcc_clr
roxr.w FTEMP_HI(%a0) # mant is 0 so restore v-bit
roxr.w FTEMP_HI+2(%a0) # mant is 0 so restore v-bit
@@ -6289,7 +6289,7 @@
add_dbl:
add.l &ad_1_dbl, FTEMP_LO(%a0) # add 1 to lsb
bcc.b dcc_clr # no carry
- addq.l &0x1, FTEMP_HI(%a0) # propogate carry
+ addq.l &0x1, FTEMP_HI(%a0) # propagate carry
bcc.b dcc_clr # no carry
roxr.w FTEMP_HI(%a0) # mant is 0 so restore v-bit
diff -ur linux-2.5.62-1104-orig/arch/m68k/kernel/head.S linux-2.5.62-1104/arch/m68k/kernel/head.S
--- linux-2.5.62-1104-orig/arch/m68k/kernel/head.S Thu Jan 16 19:22:59 2003
+++ linux-2.5.62-1104/arch/m68k/kernel/head.S Tue Feb 18 18:44:43 2003
@@ -92,7 +92,7 @@
* mmu_map was written for two key reasons. First, it was clear
* that it was very difficult to read the previous code for mapping
* regions of memory. Second, the Macintosh required such extensive
- * memory allocations that it didn't make sense to propogate the
+ * memory allocations that it didn't make sense to propagate the
* existing code any further.
* mmu_map requires some parameters:
*
diff -ur linux-2.5.62-1104-orig/arch/mips/ddb5xxx/common/pci.c linux-2.5.62-1104/arch/mips/ddb5xxx/common/pci.c
--- linux-2.5.62-1104-orig/arch/mips/ddb5xxx/common/pci.c Thu Jan 16 19:22:56 2003
+++ linux-2.5.62-1104/arch/mips/ddb5xxx/common/pci.c Tue Feb 18 18:44:43 2003
@@ -148,7 +148,7 @@
}
bus->resource[0]->flags |= pci_bridge_check_io(dev);
bus->resource[1]->flags |= IORESOURCE_MEM;
- /* For now, propogate hose limits to the bus;
+ /* For now, propagate hose limits to the bus;
we'll adjust them later. */
bus->resource[0]->end = hose->io_resource->end;
bus->resource[1]->end = hose->mem_resource->end;
diff -ur linux-2.5.62-1104-orig/arch/mips/kernel/pci.c linux-2.5.62-1104/arch/mips/kernel/pci.c
--- linux-2.5.62-1104-orig/arch/mips/kernel/pci.c Thu Jan 16 19:22:24 2003
+++ linux-2.5.62-1104/arch/mips/kernel/pci.c Tue Feb 18 18:44:43 2003
@@ -145,7 +145,7 @@
}
bus->resource[0]->flags |= pci_bridge_check_io(dev);
bus->resource[1]->flags |= IORESOURCE_MEM;
- /* For now, propogate hose limits to the bus;
+ /* For now, propagate hose limits to the bus;
we'll adjust them later. */
bus->resource[0]->end = hose->io_resource->end;
bus->resource[1]->end = hose->mem_resource->end;
diff -ur linux-2.5.62-1104-orig/drivers/block/floppy.c linux-2.5.62-1104/drivers/block/floppy.c
--- linux-2.5.62-1104-orig/drivers/block/floppy.c Mon Feb 10 12:22:58 2003
+++ linux-2.5.62-1104/drivers/block/floppy.c Tue Feb 18 18:44:43 2003
@@ -822,7 +822,7 @@
}
}
/*
- * We should propogate failures to grab the resources back
+ * We should propagate failures to grab the resources back
* nicely from here. Actually we ought to rewrite the fd
* driver some day too.
*/
diff -ur linux-2.5.62-1104-orig/drivers/char/epca.c linux-2.5.62-1104/drivers/char/epca.c
--- linux-2.5.62-1104-orig/drivers/char/epca.c Thu Jan 16 19:22:18 2003
+++ linux-2.5.62-1104/drivers/char/epca.c Tue Feb 18 18:44:43 2003
@@ -2805,7 +2805,7 @@
ch->fepstopc = ch->stopc;
/* ------------------------------------------------------------
- The XON / XOFF characters have changed; propogate these
+ The XON / XOFF characters have changed; propagate these
changes to the card.
--------------------------------------------------------------- */
@@ -2819,7 +2819,7 @@
/* ---------------------------------------------------------------
Similar to the above, this time the auxilarly XON / XOFF
- characters have changed; propogate these changes to the card.
+ characters have changed; propagate these changes to the card.
------------------------------------------------------------------ */
fepcmd(ch, SAUXONOFFC, ch->fepstartca, ch->fepstopca, 0, 1);
diff -ur linux-2.5.62-1104-orig/drivers/ide/setup-pci.c linux-2.5.62-1104/drivers/ide/setup-pci.c
--- linux-2.5.62-1104-orig/drivers/ide/setup-pci.c Thu Jan 16 19:22:03 2003
+++ linux-2.5.62-1104/drivers/ide/setup-pci.c Tue Feb 18 18:44:43 2003
@@ -662,7 +662,7 @@
* This is in the wrong place. The driver may
* do set up based on the autotune value and this
* will then trash it. Torben please move it and
- * propogate the fixes into the drivers
+ * propagate the fixes into the drivers
*/
if (drive0_tune == IDE_TUNE_BIOS) /* biostimings */
hwif->drives[0].autotune = IDE_TUNE_BIOS;
diff -ur linux-2.5.62-1104-orig/drivers/parisc/lba_pci.c linux-2.5.62-1104/drivers/parisc/lba_pci.c
--- linux-2.5.62-1104-orig/drivers/parisc/lba_pci.c Thu Jan 16 19:22:24 2003
+++ linux-2.5.62-1104/drivers/parisc/lba_pci.c Tue Feb 18 18:44:43 2003
@@ -765,7 +765,7 @@
pci_read_bridge_bases(bus);
} else {
/* Not configured.
- ** For now, propogate HBA limits to the bus;
+ ** For now, propagate HBA limits to the bus;
** PCI will adjust them later.
*/
bus->resource[0]->end = ldev->hba.io_space.end;
diff -ur linux-2.5.62-1104-orig/drivers/scsi/53c7xx.c linux-2.5.62-1104/drivers/scsi/53c7xx.c
--- linux-2.5.62-1104-orig/drivers/scsi/53c7xx.c Thu Jan 16 19:23:01 2003
+++ linux-2.5.62-1104/drivers/scsi/53c7xx.c Tue Feb 18 18:44:43 2003
@@ -5794,7 +5794,7 @@
* so we don't perturb hostdata. We don't use a field of the
* NCR53c7x0_cmd structure since we may not have allocated one
* for the command causing the reset.) of Scsi_Cmnd structures that
- * had propogated below the Linux issue queue level. If free is set,
+ * had propagated below the Linux issue queue level. If free is set,
* free the NCR53c7x0_cmd structures which are associated with
* the Scsi_Cmnd structures, and clean up any internal
* NCR lists that the commands were on. If issue is set,
diff -ur linux-2.5.62-1104-orig/include/net/sctp/ulpqueue.h linux-2.5.62-1104/include/net/sctp/ulpqueue.h
--- linux-2.5.62-1104-orig/include/net/sctp/ulpqueue.h Fri Feb 14 20:12:05 2003
+++ linux-2.5.62-1104/include/net/sctp/ulpqueue.h Tue Feb 18 18:44:43 2003
@@ -62,7 +62,7 @@
/* Add a new DATA chunk for processing. */
int sctp_ulpq_tail_data(struct sctp_ulpq *, sctp_chunk_t *chunk, int priority);
-/* Add a new event for propogation to the ULP. */
+/* Add a new event for propagation to the ULP. */
int sctp_ulpq_tail_event(struct sctp_ulpq *, struct sctp_ulpevent *ev);
/* Is the ulpqueue empty. */
diff -ur linux-2.5.62-1104-orig/net/sctp/ulpqueue.c linux-2.5.62-1104/net/sctp/ulpqueue.c
--- linux-2.5.62-1104-orig/net/sctp/ulpqueue.c Fri Feb 14 20:12:06 2003
+++ linux-2.5.62-1104/net/sctp/ulpqueue.c Tue Feb 18 18:44:43 2003
@@ -154,7 +154,7 @@
return 0;
}
-/* Add a new event for propogation to the ULP. */
+/* Add a new event for propagation to the ULP. */
int sctp_ulpq_tail_event(struct sctp_ulpq *ulpq, struct sctp_ulpevent *event)
{
struct sock *sk = ulpq->asoc->base.sk;
diff -ur linux-2.5.62-1104-orig/sound/oss/maestro.c linux-2.5.62-1104/sound/oss/maestro.c
--- linux-2.5.62-1104-orig/sound/oss/maestro.c Mon Feb 10 12:23:10 2003
+++ linux-2.5.62-1104/sound/oss/maestro.c Tue Feb 18 18:44:43 2003
@@ -1830,7 +1830,7 @@
if (s->dma_adc.ready) {
/* oh boy should this all be re-written. everything in the current code paths think
that the various counters/pointers are expressed in bytes to the user but we have
- two apus doing stereo stuff so we fix it up here.. it propogates to all the various
+ two apus doing stereo stuff so we fix it up here.. it propagates to all the various
counters from here. */
if ( s->fmt & (ESS_FMT_STEREO << ESS_ADC_SHIFT)) {
hwptr = (get_dmac(s)*2) % s->dma_adc.dmasize;
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-02-19 3:09 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-02-19 2:59 [PATCH] 2.5.62 spelling fix for propogate -> propagate in 13 files Steven Cole
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®