Linux 2.6.0.test2 AIC7xxx (new) problem was [ Re: Badness in device_release at drivers/base/core.c:84 ]

Linux 2.6.0.test2 AIC7xxx (new) problem was [ Re: Badness in device_release at drivers/base/core.c:84 ]

[Paul Blazejowski]

[-- Attachment #1.1: Type: text/plain, Size: 450 bytes --]

Justin,

I was able to get some verbose information from boot process on this
machine regarding aic7xxx (new) driver and AHA-2940UW2 with IBM 36LZX
10k rpm disk drive.Attached is 2 log files:

scsi_mod.max_scsi_luns=1 and scsi_mod.scsi_logging_level=0x140 as
suggested by Patrick

and

aic7xxx=verbose given to lilo boot loader

Hopefully you will be able to see what's happening when the adapter is
probed.

Thank you,

Paul B.


[-- Attachment #1.2: aic7xxx.log.txt --]
[-- Type: text/plain, Size: 12453 bytes --]

Connected
scsi.mod.\b \b\b \b\b \b\b \b\b \b_mod.scsi_logging_level=0x140 scsi_mods\b \bd\b \b.max_scsi_luns=1
Loading Slackware-2.6..............................
BIOS data check successful
Linux version 2.6.0-test2-mm4 (root@blaze) (gcc version 3.2.2) #1 Tue Aug 5 02:42:20 EDT 2003
\rVideo mode to be used for restore is f00
\rBIOS-provided physical RAM map:
\r BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
\r BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
\r BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
\r BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
\r BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
\r BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
\r BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
\r BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
\r BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
\r127MB HIGHMEM available.
\r896MB LOWMEM available.
\rfound SMP MP-table at 000f5240
\rhm, page 000f5000 reserved twice.
\rhm, page 000f6000 reserved twice.
\rhm, page 000f0000 reserved twice.
\rhm, page 000f1000 reserved twice.
\rOn node 0 totalpages: 262128
\r  DMA zone: 4096 pages, LIFO batch:1
\r  Normal zone: 225280 pages, LIFO batch:16
\r  HighMem zone: 32752 pages, LIFO batch:7
\rtouching all pages ...
\rdone.
\rACPI: RSDP (v000 Nvidia                     ) @ 0x000f6bb0
\rACPI: RSDT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff3000
\rACPI: FADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff3040
\rACPI: MADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff7680
\rACPI: DSDT (v001 NVIDIA AWRDACPI 00000.04096) @ 0x00000000
\rACPI: BIOS passes blacklist
\rACPI: Local APIC address 0xfee00000
\rACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
\rProcessor #0 6:10 APIC version 16
\rACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1])
\rACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
\rIOAPIC[0]: Assigned apic_id 2
\rIOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
\rACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
\rACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
\rEnabling APIC mode:  Flat.  Using 1 I/O APICs
\rUsing ACPI (MADT) for SMP configuration information
\rBuilding zonelist for node : 0
\rKernel command line: BOOT_IMAGE=Slackware-2.6 ro root=803 rootflags=quota console=ttyS0,9600n8 console=tty0 scsi_mod.scsi_logging_level=0x140 scsi_mod.max_scsi_luns=1
\rUnknown boot option `scsi_mod.max_scsi_luns=1': ignoring
\rcurrent: c03859c0
\rcurrent->thread_info: c03d6000
\rInitializing CPU#0
\rPID hash table entries: 4096 (order 12: 32768 bytes)
\rDetected 2305.090 MHz processor.
\rConsole: colour VGA+ 80x25
\rCalibrating delay loop... 4554.75 BogoMIPS
\rMemory: 1033676k/1048512k available (2285k kernel code, 13896k reserved, 615k data, 348k init, 131008k highmem)
\rzapping low mappings.
\rDentry cache hash table entries: 131072 (order: 7, 524288 bytes)
\rInode-cache hash table entries: 65536 (order: 6, 262144 bytes)
\rMount-cache hash table entries: 512 (order: 0, 4096 bytes)
\r-> /dev
\r-> /dev/console
\r-> /root
\rCPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
\rCPU: L2 Cache: 512K (64 bytes/line)
\rIntel machine check architecture supported.
\rIntel machine check reporting enabled on CPU#0.
\rCPU: AMD Athlon(tm)  stepping 00
\rEnabling fast FPU save and restore... done.
\rEnabling unmasked SIMD FPU exception support... done.
\rChecking 'hlt' instruction... OK.
\rPOSIX conformance testing by UNIFIX
\renabled ExtINT on CPU#0
\rESR value before enabling vector: 00000000
\rESR value after enabling vector: 00000000
\rENABLING IO-APIC IRQs
\r..TIMER: vector=0x31 pin1=2 pin2=-1
\r..MP-BIOS bug: 8254 timer not connected to IO-APIC
\r...trying to set up timer (IRQ0) through the 8259A ...  failed.
\r...trying to set up timer as Virtual Wire IRQ... failed.
\r...trying to set up timer as ExtINT IRQ... works.
\rtesting the IO APIC.......................
\r.................................... done.
\rUsing local APIC timer interrupts.
\rcalibrating APIC timer ...
\r..... CPU clock speed is 2304.0829 MHz.
\r..... host bus clock speed is 400.0839 MHz.
\rmtrr: v2.0 (20020519)
\rInitializing RT netlink socket
\rPCI: PCI BIOS revision 2.10 entry at 0xfabc0, last bus=3
\rPCI: Using configuration type 1
\rBIO: pool of 256 setup, 15Kb (60 bytes/bio)
\rbiovec pool[0]:   1 bvecs: 256 entries (12 bytes)
\rbiovec pool[1]:   4 bvecs: 256 entries (48 bytes)
\rbiovec pool[2]:  16 bvecs: 256 entries (192 bytes)
\rbiovec pool[3]:  64 bvecs: 256 entries (768 bytes)
\rbiovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
\rbiovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
\rACPI: Subsystem revision 20030714
\rACPI: Interpreter enabled
\rACPI: Using IOAPIC for interrupt routing
\rACPI: PCI Root Bridge [PCI0] (00:00)
\rPCI: Probing PCI hardware (bus 00)
\rACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15)
\rACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
\rACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
\rACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
\rACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
\rACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
\rACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
\rACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
\rACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
\rACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
\rACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
\rACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
\rACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
\rACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 *11 12 14 15)
\rACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
\rACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
\rACPI: PCI Interrupt Link [APC1] (IRQs *16)
\rACPI: PCI Interrupt Link [APC2] (IRQs 17, disabled)
\rACPI: PCI Interrupt Link [APC3] (IRQs *18)
\rACPI: PCI Interrupt Link [APC4] (IRQs *19)
\rACPI: PCI Interrupt Link [APC5] (IRQs 16, disabled)
\rACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCS] (IRQs *23)
\rACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22, disabled)
\rLinux Plug and Play Support v0.96 (c) Adam Belay
\rPnPBIOS: Scanning system for PnP BIOS support...
\rPnPBIOS: Found PnP BIOS installation structure at 0xc00fb610
\rPnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb640, dseg 0xf0000
\rPnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
\rSCSI subsystem initialized
\rdrivers/usb/core/usb.c: registered new driver usbfs
\rdrivers/usb/core/usb.c: registered new driver hub
\rACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
\rACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
\rACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
\rACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
\rACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
\rACPI: PCI Interrupt Link [APCI] enabled at IRQ 22
\rACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
\rACPI: PCI Interrupt Link [APCK] enabled at IRQ 20
\rACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
\rACPI: PCI Interrupt Link [APCZ] enabled at IRQ 21
\rACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
\rACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
\rACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
\rACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
\rPCI: Using ACPI for IRQ routing
\rPCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
\rpty: 512 Unix98 ptys configured
\rMachine check exception polling timer started.
\rEnabling SEP on CPU 0
\rTotal HugeTLB memory allocated, 0
\rhighmem bounce pool size: 64 pages
\rVFS: Disk quotas dquot_6.5.1
\rdevfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
\rdevfs: boot_options: 0x1
\rSGI XFS for Linux with ACLs, no debug enabled
\rSGI XFS Quota Management subsystem
\rInitializing Cryptographic API
\rACPI: Power Button (FF) [PWRF]
\rACPI: Processor [CPU0] (supports C1)
\rSerial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
\rttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
\rttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
\rUsing anticipatory scheduling elevator
\rFloppy drive(s): fd0 is 1.44M
\rFDC 0 is a post-1991 82077
\rUniform Multi-Platform E-IDE driver Revision: 7.00alpha2
\ride: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
\rNFORCE2: IDE controller at PCI slot 0000:00:09.0
\rNFORCE2: chipset revision 162
\rNFORCE2: not 100% native mode: will probe irqs later
\rAMD_IDE: Bios didn't set cable bits correctly. Enabling workaround.
\ride: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
\rAMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 controller on pci0000:00:09.0
\r    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
\r    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
\rhda: IBM-DJNA-372200, ATA DISK drive
\ride0 at 0x1f0-0x1f7,0x3f6 on irq 14
\rhdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
\ride1 at 0x170-0x177,0x376 on irq 15
\rhda: max request size: 128KiB
\rhda: host protected area => 1
\rhda: 44150400 sectors (22605 MB) w/1966KiB Cache, CHS=43800/16/63
\r /dev/ide/host0/bus0/target0/lun0: p1
\rscsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35
\r        <Adaptec 2940 Ultra2 SCSI adapter>
\r        aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs

\rscsi scan: INQUIRY to host 0 channel 0 id 0 lun 0
\r(scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 1 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 2 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 3 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 4 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 5 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 6 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 8 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 9 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 10 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 11 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 12 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 13 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 14 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rscsi scan: INQUIRY to host 0 channel 0 id 15 lun 0
\rscsi scan: 1st INQUIRY failed with code 0x10000
\rmice: PS/2 mouse device common for all mice
\rinput: PC Speaker
\rinput: PS/2 Generic Mouse on isa0060/serio1
\rserio: i8042 AUX port at 0x60,0x64 irq 12
\rinput: AT Set 2 keyboard on isa0060/serio0
\rserio: i8042 KBD port at 0x60,0x64 irq 1
\rNET4: Linux TCP/IP 1.0 for NET4.0
\rIP: routing cache hash table of 8192 buckets, 64Kbytes
\rTCP: Hash tables configured (established 262144 bind 65536)
\rNET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
\rBIOS EDD facility v0.09 2003-Jan-22, 2 devices found
\rVFS: Cannot open root device "803" or unknown-block(8,3)
\rPlease append a correct "root=" boot option
\rKernel panic: VFS: Unable to mount root fs on unknown-block(8,3)
\r 

[-- Attachment #1.3: aic7xxx.log1.txt --]
[-- Type: text/plain, Size: 37540 bytes --]

Connected

Loading Slackware-2.6..............................
BIOS data check successful
Linux version 2.6.0-test2-mm4 (root@blaze) (gcc version 3.2.2) #1 Tue Aug 5 02:42:20 EDT 2003
\rVideo mode to be used for restore is f00
\rBIOS-provided physical RAM map:
\r BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
\r BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
\r BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
\r BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
\r BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
\r BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
\r BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
\r BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
\r BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
\r127MB HIGHMEM available.
\r896MB LOWMEM available.
\rfound SMP MP-table at 000f5240
\rhm, page 000f5000 reserved twice.
\rhm, page 000f6000 reserved twice.
\rhm, page 000f0000 reserved twice.
\rhm, page 000f1000 reserved twice.
\rOn node 0 totalpages: 262128
\r  DMA zone: 4096 pages, LIFO batch:1
\r  Normal zone: 225280 pages, LIFO batch:16
\r  HighMem zone: 32752 pages, LIFO batch:7
\rtouching all pages ...
\rdone.
\rACPI: RSDP (v000 Nvidia                     ) @ 0x000f6bb0
\rACPI: RSDT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff3000
\rACPI: FADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff3040
\rACPI: MADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x3fff7680
\rACPI: DSDT (v001 NVIDIA AWRDACPI 00000.04096) @ 0x00000000
\rACPI: BIOS passes blacklist
\rACPI: Local APIC address 0xfee00000
\rACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
\rProcessor #0 6:10 APIC version 16
\rACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1])
\rACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
\rIOAPIC[0]: Assigned apic_id 2
\rIOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
\rACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
\rACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
\rEnabling APIC mode:  Flat.  Using 1 I/O APICs
\rUsing ACPI (MADT) for SMP configuration information
\rBuilding zonelist for node : 0
\rKernel command line: BOOT_IMAGE=Slackware-2.6 ro root=803 rootflags=quota console=ttyS0,9600n8 console=tty0 aic7xxx=verbose
\rcurrent: c03859c0
\rcurrent->thread_info: c03d6000
\rInitializing CPU#0
\rPID hash table entries: 4096 (order 12: 32768 bytes)
\rDetected 2304.999 MHz processor.
\rConsole: colour VGA+ 80x25
\rCalibrating delay loop... 4554.75 BogoMIPS
\rMemory: 1033676k/1048512k available (2285k kernel code, 13896k reserved, 615k data, 348k init, 131008k highmem)
\rzapping low mappings.
\rDentry cache hash table entries: 131072 (order: 7, 524288 bytes)
\rInode-cache hash table entries: 65536 (order: 6, 262144 bytes)
\rMount-cache hash table entries: 512 (order: 0, 4096 bytes)
\r-> /dev
\r-> /dev/console
\r-> /root
\rCPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
\rCPU: L2 Cache: 512K (64 bytes/line)
\rIntel machine check architecture supported.
\rIntel machine check reporting enabled on CPU#0.
\rCPU: AMD Athlon(tm)  stepping 00
\rEnabling fast FPU save and restore... done.
\rEnabling unmasked SIMD FPU exception support... done.
\rChecking 'hlt' instruction... OK.
\rPOSIX conformance testing by UNIFIX
\renabled ExtINT on CPU#0
\rESR value before enabling vector: 00000000
\rESR value after enabling vector: 00000000
\rENABLING IO-APIC IRQs
\r..TIMER: vector=0x31 pin1=2 pin2=-1
\r..MP-BIOS bug: 8254 timer not connected to IO-APIC
\r...trying to set up timer (IRQ0) through the 8259A ...  failed.
\r...trying to set up timer as Virtual Wire IRQ... failed.
\r...trying to set up timer as ExtINT IRQ... works.
\rtesting the IO APIC.......................
\r.................................... done.
\rUsing local APIC timer interrupts.
\rcalibrating APIC timer ...
\r..... CPU clock speed is 2304.0796 MHz.
\r..... host bus clock speed is 400.0834 MHz.
\rmtrr: v2.0 (20020519)
\rInitializing RT netlink socket
\rPCI: PCI BIOS revision 2.10 entry at 0xfabc0, last bus=3
\rPCI: Using configuration type 1
\rBIO: pool of 256 setup, 15Kb (60 bytes/bio)
\rbiovec pool[0]:   1 bvecs: 256 entries (12 bytes)
\rbiovec pool[1]:   4 bvecs: 256 entries (48 bytes)
\rbiovec pool[2]:  16 bvecs: 256 entries (192 bytes)
\rbiovec pool[3]:  64 bvecs: 256 entries (768 bytes)
\rbiovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
\rbiovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
\rACPI: Subsystem revision 20030714
\rACPI: Interpreter enabled
\rACPI: Using IOAPIC for interrupt routing
\rACPI: PCI Root Bridge [PCI0] (00:00)
\rPCI: Probing PCI hardware (bus 00)
\rACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15)
\rACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
\rACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
\rACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
\rACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
\rACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
\rACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
\rACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
\rACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at IRQ 9)
\rACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
\rACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
\rACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
\rACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
\rACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 *11 12 14 15)
\rACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
\rACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
\rACPI: PCI Interrupt Link [APC1] (IRQs *16)
\rACPI: PCI Interrupt Link [APC2] (IRQs 17, disabled)
\rACPI: PCI Interrupt Link [APC3] (IRQs *18)
\rACPI: PCI Interrupt Link [APC4] (IRQs *19)
\rACPI: PCI Interrupt Link [APC5] (IRQs 16, disabled)
\rACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCS] (IRQs *23)
\rACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22, disabled)
\rACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22, disabled)
\rLinux Plug and Play Support v0.96 (c) Adam Belay
\rPnPBIOS: Scanning system for PnP BIOS support...
\rPnPBIOS: Found PnP BIOS installation structure at 0xc00fb610
\rPnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb640, dseg 0xf0000
\rPnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
\rSCSI subsystem initialized
\rdrivers/usb/core/usb.c: registered new driver usbfs
\rdrivers/usb/core/usb.c: registered new driver hub
\rACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
\rACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
\rACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
\rACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
\rACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
\rACPI: PCI Interrupt Link [APCI] enabled at IRQ 22
\rACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
\rACPI: PCI Interrupt Link [APCK] enabled at IRQ 20
\rACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
\rACPI: PCI Interrupt Link [APCZ] enabled at IRQ 21
\rACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
\rACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
\rACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
\rACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
\rPCI: Using ACPI for IRQ routing
\rPCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
\rpty: 512 Unix98 ptys configured
\rMachine check exception polling timer started.
\rEnabling SEP on CPU 0
\rTotal HugeTLB memory allocated, 0
\rhighmem bounce pool size: 64 pages
\rVFS: Disk quotas dquot_6.5.1
\rdevfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
\rdevfs: boot_options: 0x1
\rSGI XFS for Linux with ACLs, no debug enabled
\rSGI XFS Quota Management subsystem
\rInitializing Cryptographic API
\rACPI: Power Button (FF) [PWRF]
\rACPI: Processor [CPU0] (supports C1)
\rSerial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
\rttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
\rttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
\rUsing anticipatory scheduling elevator
\rFloppy drive(s): fd0 is 1.44M
\rFDC 0 is a post-1991 82077
\rUniform Multi-Platform E-IDE driver Revision: 7.00alpha2
\ride: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
\rNFORCE2: IDE controller at PCI slot 0000:00:09.0
\rNFORCE2: chipset revision 162
\rNFORCE2: not 100% native mode: will probe irqs later
\rAMD_IDE: Bios didn't set cable bits correctly. Enabling workaround.
\ride: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
\rAMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 controller on pci0000:00:09.0
\r    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
\r    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
\rhda: IBM-DJNA-372200, ATA DISK drive
\ride0 at 0x1f0-0x1f7,0x3f6 on irq 14
\rhdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
\ride1 at 0x170-0x177,0x376 on irq 15
\rhda: max request size: 128KiB
\rhda: host protected area => 1
\rhda: 44150400 sectors (22605 MB) w/1966KiB Cache, CHS=43800/16/63
\r /dev/ide/host0/bus0/target0/lun0: p1
\rahc_pci:1:10:0: Reading SEEPROM...done.
\rahc_pci:1:10:0: BIOS eeprom is present
\rahc_pci:1:10:0: Secondary High byte termination Enabled
\rahc_pci:1:10:0: Primary Low Byte termination Enabled
\rahc_pci:1:10:0: Primary High Byte termination Enabled
\rahc_pci:1:10:0: Downloading Sequencer Program... 423 instructions downloaded
\rahc_pci:1:10:0: Features 0x56f6, Bugs 0x6, Flags 0x20485540
\rscsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35
\r        <Adaptec 2940 Ultra2 SCSI adapter>
\r        aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs

\rscsi0: Slave Alloc 0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period a, offset 7f
\r(scsi0:A:0:0): Received SDTR period a, offset 3f
\r	Filtered to period a, offset 3f
\r(scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 40.0MHz, offset = 0x3f
\r(scsi0:A:0): 40.000MB/s transfers (40.000MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period b, offset 7f
\r(scsi0:A:0:0): Received SDTR period c, offset 3f
\r	Filtered to period c, offset 3f
\r(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 20.0MHz, offset = 0x3f
\r(scsi0:A:0): 20.000MB/s transfers (20.000MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending SDTR period a, offset 7f
\r(scsi0:A:0:0): Received SDTR period a, offset 3f
\r	Filtered to period a, offset 3f
\r(scsi0:A:0): 40.000MB/s transfers (40.000MHz, offset 63)
\rscsi0: target 0 synchronous at 40.0MHz, offset = 0x3f
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending SDTR period b, offset 7f
\r(scsi0:A:0:0): Received SDTR period c, offset 3f
\r	Filtered to period c, offset 3f
\r(scsi0:A:0): 20.000MB/s transfers (20.000MHz, offset 63)
\rscsi0: target 0 synchronous at 20.0MHz, offset = 0x3f
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period d, offset 7f
\r(scsi0:A:0:0): Received SDTR period d, offset 3f
\r	Filtered to period d, offset 3f
\r(scsi0:A:0): 38.460MB/s transfers (19.230MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 16.0MHz, offset = 0x3f
\r(scsi0:A:0): 19.230MB/s transfers (19.230MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period e, offset 7f
\r(scsi0:A:0:0): Received SDTR period e, offset 3f
\r	Filtered to period e, offset 3f
\r(scsi0:A:0): 35.714MB/s transfers (17.857MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 16.0MHz, offset = 0x3f
\r(scsi0:A:0): 17.857MB/s transfers (17.857MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period f, offset 7f
\r(scsi0:A:0:0): Received SDTR period f, offset 3f
\r	Filtered to period f, offset 3f
\r(scsi0:A:0): 33.332MB/s transfers (16.666MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 16.0MHz, offset = 0x3f
\r(scsi0:A:0): 16.666MB/s transfers (16.666MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 10, offset 7f
\r(scsi0:A:0:0): Received SDTR period 10, offset 3f
\r	Filtered to period 10, offset 3f
\r(scsi0:A:0): 31.250MB/s transfers (15.625MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 13.4MHz, offset = 0x3f
\r(scsi0:A:0): 15.625MB/s transfers (15.625MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 11, offset 7f
\r(scsi0:A:0:0): Received SDTR period 11, offset 3f
\r	Filtered to period 11, offset 3f
\r(scsi0:A:0): 29.410MB/s transfers (14.705MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 13.4MHz, offset = 0x3f
\r(scsi0:A:0): 14.705MB/s transfers (14.705MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 12, offset 7f
\r(scsi0:A:0:0): Received SDTR period 12, offset 3f
\r	Filtered to period 12, offset 3f
\r(scsi0:A:0): 27.776MB/s transfers (13.888MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 13.4MHz, offset = 0x3f
\r(scsi0:A:0): 13.888MB/s transfers (13.888MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 13, offset 7f
\r(scsi0:A:0:0): Received SDTR period 13, offset 3f
\r	Filtered to period 13, offset 3f
\r(scsi0:A:0): 26.314MB/s transfers (13.157MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
\r(scsi0:A:0): 13.157MB/s transfers (13.157MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 14, offset 7f
\r(scsi0:A:0:0): Received SDTR period 14, offset 3f
\r	Filtered to period 14, offset 3f
\r(scsi0:A:0): 25.000MB/s transfers (12.500MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
\r(scsi0:A:0): 12.500MB/s transfers (12.500MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 15, offset 7f
\r(scsi0:A:0:0): Received SDTR period 15, offset 3f
\r	Filtered to period 15, offset 3f
\r(scsi0:A:0): 23.808MB/s transfers (11.904MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
\r(scsi0:A:0): 11.904MB/s transfers (11.904MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 16, offset 7f
\r(scsi0:A:0:0): Received SDTR period 16, offset 3f
\r	Filtered to period 16, offset 3f
\r(scsi0:A:0): 22.726MB/s transfers (11.363MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
\r(scsi0:A:0): 11.363MB/s transfers (11.363MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 17, offset 7f
\r(scsi0:A:0:0): Received SDTR period 17, offset 3f
\r	Filtered to period 17, offset 3f
\r(scsi0:A:0): 21.738MB/s transfers (10.869MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
\r(scsi0:A:0): 10.869MB/s transfers (10.869MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 18, offset 7f
\r(scsi0:A:0:0): Received SDTR period 18, offset 3f
\r	Filtered to period 18, offset 3f
\r(scsi0:A:0): 20.832MB/s transfers (10.416MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
\r(scsi0:A:0): 10.416MB/s transfers (10.416MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 19, offset 7f
\r(scsi0:A:0:0): Received SDTR period 19, offset 3f
\r	Filtered to period 19, offset 3f
\r(scsi0:A:0): 20.000MB/s transfers (10.000MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 10.0MHz, offset = 0x3f
\r(scsi0:A:0): 10.000MB/s transfers (10.000MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 1a, offset 7f
\r(scsi0:A:0:0): Received SDTR period 1a, offset 3f
\r	Filtered to period 1a, offset 3f
\r(scsi0:A:0): 19.230MB/s transfers (9.615MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 8.0MHz, offset = 0x3f
\r(scsi0:A:0): 9.615MB/s transfers (9.615MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 1b, offset 7f
\r(scsi0:A:0:0): Received SDTR period 1b, offset 3f
\r	Filtered to period 1b, offset 3f
\r(scsi0:A:0): 18.518MB/s transfers (9.259MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 8.0MHz, offset = 0x3f
\r(scsi0:A:0): 9.259MB/s transfers (9.259MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 1c, offset 7f
\r(scsi0:A:0:0): Received SDTR period 1c, offset 3f
\r	Filtered to period 1c, offset 3f
\r(scsi0:A:0): 17.856MB/s transfers (8.928MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 8.0MHz, offset = 0x3f
\r(scsi0:A:0): 8.928MB/s transfers (8.928MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 1d, offset 7f
\r(scsi0:A:0:0): Received SDTR period 1d, offset 3f
\r	Filtered to period 1d, offset 3f
\r(scsi0:A:0): 17.240MB/s transfers (8.620MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 8.0MHz, offset = 0x3f
\r(scsi0:A:0): 8.620MB/s transfers (8.620MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 1e, offset 7f
\r(scsi0:A:0:0): Received SDTR period 1e, offset 3f
\r	Filtered to period 1e, offset 3f
\r(scsi0:A:0): 16.666MB/s transfers (8.333MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 8.0MHz, offset = 0x3f
\r(scsi0:A:0): 8.333MB/s transfers (8.333MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 1f, offset 7f
\r(scsi0:A:0:0): Received SDTR period 1f, offset 3f
\r	Filtered to period 1f, offset 3f
\r(scsi0:A:0): 16.128MB/s transfers (8.064MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 8.0MHz, offset = 0x3f
\r(scsi0:A:0): 8.064MB/s transfers (8.064MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 20, offset 7f
\r(scsi0:A:0:0): Received SDTR period 20, offset 3f
\r	Filtered to period 20, offset 3f
\r(scsi0:A:0): 15.624MB/s transfers (7.812MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 6.67MHz, offset = 0x3f
\r(scsi0:A:0): 7.812MB/s transfers (7.812MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 21, offset 7f
\r(scsi0:A:0:0): Received SDTR period 21, offset 3f
\r	Filtered to period 21, offset 3f
\r(scsi0:A:0): 15.150MB/s transfers (7.575MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 6.67MHz, offset = 0x3f
\r(scsi0:A:0): 7.575MB/s transfers (7.575MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 22, offset 7f
\r(scsi0:A:0:0): Received SDTR period 22, offset 3f
\r	Filtered to period 22, offset 3f
\r(scsi0:A:0): 14.704MB/s transfers (7.352MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 6.67MHz, offset = 0x3f
\r(scsi0:A:0): 7.352MB/s transfers (7.352MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 23, offset 7f
\r(scsi0:A:0:0): Received SDTR period 23, offset 3f
\r	Filtered to period 23, offset 3f
\r(scsi0:A:0): 14.284MB/s transfers (7.142MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 6.67MHz, offset = 0x3f
\r(scsi0:A:0): 7.142MB/s transfers (7.142MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 24, offset 7f
\r(scsi0:A:0:0): Received SDTR period 24, offset 3f
\r	Filtered to period 24, offset 3f
\r(scsi0:A:0): 13.888MB/s transfers (6.944MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 6.67MHz, offset = 0x3f
\r(scsi0:A:0): 6.944MB/s transfers (6.944MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 25, offset 7f
\r(scsi0:A:0:0): Received SDTR period 25, offset 3f
\r	Filtered to period 25, offset 3f
\r(scsi0:A:0): 13.512MB/s transfers (6.756MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 6.67MHz, offset = 0x3f
\r(scsi0:A:0): 6.756MB/s transfers (6.756MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 26, offset 7f
\r(scsi0:A:0:0): Received SDTR period 26, offset 3f
\r	Filtered to period 26, offset 3f
\r(scsi0:A:0): 13.156MB/s transfers (6.578MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 5.7MHz, offset = 0x3f
\r(scsi0:A:0): 6.578MB/s transfers (6.578MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 27, offset 7f
\r(scsi0:A:0:0): Received SDTR period 27, offset 3f
\r	Filtered to period 27, offset 3f
\r(scsi0:A:0): 12.820MB/s transfers (6.410MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 5.7MHz, offset = 0x3f
\r(scsi0:A:0): 6.410MB/s transfers (6.410MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 28, offset 7f
\r(scsi0:A:0:0): Received SDTR period 28, offset 3f
\r	Filtered to period 28, offset 3f
\r(scsi0:A:0): 12.500MB/s transfers (6.250MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 5.7MHz, offset = 0x3f
\r(scsi0:A:0): 6.250MB/s transfers (6.250MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 29, offset 7f
\r(scsi0:A:0:0): Received SDTR period 29, offset 3f
\r	Filtered to period 29, offset 3f
\r(scsi0:A:0): 12.194MB/s transfers (6.097MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 5.7MHz, offset = 0x3f
\r(scsi0:A:0): 6.097MB/s transfers (6.097MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 2a, offset 7f
\r(scsi0:A:0:0): Received SDTR period 2a, offset 3f
\r	Filtered to period 2a, offset 3f
\r(scsi0:A:0): 11.904MB/s transfers (5.952MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 5.7MHz, offset = 0x3f
\r(scsi0:A:0): 5.952MB/s transfers (5.952MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 2b, offset 7f
\r(scsi0:A:0:0): Received SDTR period 2b, offset 3f
\r	Filtered to period 2b, offset 3f
\r(scsi0:A:0): 11.626MB/s transfers (5.813MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 5.7MHz, offset = 0x3f
\r(scsi0:A:0): 5.813MB/s transfers (5.813MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 2c, offset 7f
\r(scsi0:A:0:0): Received SDTR period 2c, offset 3f
\r	Filtered to period 2c, offset 3f
\r(scsi0:A:0): 11.362MB/s transfers (5.681MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
\r(scsi0:A:0): 5.681MB/s transfers (5.681MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 2d, offset 7f
\r(scsi0:A:0:0): Received SDTR period 2d, offset 3f
\r	Filtered to period 2d, offset 3f
\r(scsi0:A:0): 11.110MB/s transfers (5.555MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
\r(scsi0:A:0): 5.555MB/s transfers (5.555MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 2e, offset 7f
\r(scsi0:A:0:0): Received SDTR period 2e, offset 3f
\r	Filtered to period 2e, offset 3f
\r(scsi0:A:0): 10.868MB/s transfers (5.434MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
\r(scsi0:A:0): 5.434MB/s transfers (5.434MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 2f, offset 7f
\r(scsi0:A:0:0): Received SDTR period 2f, offset 3f
\r	Filtered to period 2f, offset 3f
\r(scsi0:A:0): 10.638MB/s transfers (5.319MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
\r(scsi0:A:0): 5.319MB/s transfers (5.319MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 30, offset 7f
\r(scsi0:A:0:0): Received SDTR period 30, offset 3f
\r	Filtered to period 30, offset 3f
\r(scsi0:A:0): 10.416MB/s transfers (5.208MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
\r(scsi0:A:0): 5.208MB/s transfers (5.208MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 31, offset 7f
\r(scsi0:A:0:0): Received SDTR period 31, offset 3f
\r	Filtered to period 31, offset 3f
\r(scsi0:A:0): 10.204MB/s transfers (5.102MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
\r(scsi0:A:0): 5.102MB/s transfers (5.102MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending SDTR period 32, offset 7f
\r(scsi0:A:0:0): Received SDTR period 32, offset 3f
\r	Filtered to period 32, offset 3f
\r(scsi0:A:0): 10.000MB/s transfers (5.000MHz, offset 63, 16bit)
\rscsi0: target 0 synchronous at 5.0MHz, offset = 0x3f
\r(scsi0:A:0): 5.000MB/s transfers (5.000MHz, offset 63)
\rscsi0: target 0 using 8bit transfers
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using asynchronous transfers
\rahc_intr: HOST_MSG_LOOP bad phase 0x0
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 6.600MB/s transfers (16bit)
\rscsi0: target 0 using 16bit transfers
\r(scsi0:A:0:0): Sending WDTR 1
\r(scsi0:A:0:0): Received WDTR 1 filtered to 1
\r(scsi0:A:0): 3.300MB/s transfers
\rscsi0: target 0 using 8bit transfers
\rscsi0: Slave Destroy 0
\rscsi0: Slave Alloc 1
\rscsi0: Slave Destroy 1
\rscsi0: Slave Alloc 2
\rscsi0: Slave Destroy 2
\rscsi0: Slave Alloc 3
\rscsi0: Slave Destroy 3
\rscsi0: Slave Alloc 4
\rscsi0: Slave Destroy 4
\rscsi0: Slave Alloc 5
\rscsi0: Slave Destroy 5
\rscsi0: Slave Alloc 6
\rscsi0: Slave Destroy 6
\rscsi0: Slave Alloc 8
\rscsi0: Slave Destroy 8
\rscsi0: Slave Alloc 9
\rscsi0: Slave Destroy 9
\rscsi0: Slave Alloc 10
\rscsi0: Slave Destroy 10
\rscsi0: Slave Alloc 11
\rscsi0: Slave Destroy 11
\rscsi0: Slave Alloc 12
\rscsi0: Slave Destroy 12
\rscsi0: Slave Alloc 13
\rscsi0: Slave Destroy 13
\rscsi0: Slave Alloc 14
\rscsi0: Slave Destroy 14
\rscsi0: Slave Alloc 15
\rscsi0: Slave Destroy 15
\rmice: PS/2 mouse device common for all mice
\rinput: PC Speaker
\rinput: PS/2 Generic Mouse on isa0060/serio1
\rserio: i8042 AUX port at 0x60,0x64 irq 12
\rinput: AT Set 2 keyboard on isa0060/serio0
\rserio: i8042 KBD port at 0x60,0x64 irq 1
\rNET4: Linux TCP/IP 1.0 for NET4.0
\rIP: routing cache hash table of 8192 buckets, 64Kbytes
\rTCP: Hash tables configured (established 262144 bind 65536)
\rNET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
\rBIOS EDD facility v0.09 2003-Jan-22, 2 devices found
\rVFS: Cannot open root device "803" or unknown-block(8,3)
\rPlease append a correct "root=" boot option
\rKernel panic: VFS: Unable to mount root fs on unknown-block(8,3)
\r 

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]