From: Shane Shrybman <shrybman@aei.ca>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: 2.6 unknown partition table
Date: 24 Dec 2003 09:52:22 -0500 [thread overview]
Message-ID: <1072277542.10203.14.camel@mars.goatskin.org> (raw)
Hi,
I noticed this in the logs yesterday on 2.6.0-test11-mm1 and upgraded to
2.6.0-mm1, but its still there. I use LVM on that disk and it is working
fine, (LV file systems are mountable and useable).
I recently was experimenting with raid5 on five, 100MB LVs on that disk.
Could that maybe have caused this? Since everything has been working
fine I don't know at which kernel version this appeared although I have
been using 2.6 for over a year.
Advice?
# fdisk -l /dev/hdg
Disk /dev/hdg: 16 heads, 63 sectors, 155114 cylinders
Units = cylinders of 1008 * 512 bytes
Disk /dev/hdg doesn't contain a valid partition table
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PDC20269: IDE controller at PCI slot 0000:00:0d.0
PDC20269: chipset revision 2
PDC20269: Ultra133 TX2 on pci0000:00:0d.0
PDC20269: 100% native mode on irq 16
ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio
hde: IBM-DJNA-352030, ATA DISK drive
ide2 at 0xb800-0xb807,0xb402 on irq 16
hdg: MAXTOR 6L080J4, ATA DISK drive
ide3 at 0xb000-0xb007,0xa802 on irq 16
VIA8237SATA: IDE controller at PCI slot 0000:00:0f.0
VIA8237SATA: chipset revision 128
VIA8237SATA: 100% native mode on irq 20
ide4: BM-DMA at 0x8400-0x8407, BIOS settings: hdi:pio, hdj:pio
ide5: BM-DMA at 0x8408-0x840f, BIOS settings: hdk:pio, hdl:pio
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0x7800-0x7807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x7808-0x780f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DJNA-352030, ATA DISK drive
hdb: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hde: max request size: 128KiB
hde: 39876480 sectors (20416 MB) w/1966KiB Cache, CHS=39560/16/63,
UDMA(33)
hde: hde1 hde2 hde3 hde4 < hde5 >
hdg: max request size: 128KiB
hdg: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63,
UDMA(133)
hdg: unknown partition table
hda: max request size: 128KiB
hda: 39876480 sectors (20416 MB) w/1966KiB Cache, CHS=39560/16/63
hda: hda1 hda2 hda3 hda4 < hda5 >
cdrom: : unknown mrw mode page
hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
end_request: I/O error, dev hdb, sector 0
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
end_request: I/O error, dev hdc, sector 0
vgdisplay --- Physical volumes ---
vgdisplay PV Name /dev/hdg
vgdisplay PV UUID 3q6w4c-bgGg-KgHR-8Orv-hr0n-qFwV-SeCTOv
vgdisplay PV Status allocatable
vgdisplay Total PE / Free PE 19085 / 1590
vgdisplay
Regards,
Shane
next reply other threads:[~2003-12-24 14:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-24 14:52 Shane Shrybman [this message]
2003-12-24 16:49 ` Christophe Saout
2003-12-24 17:49 ` Shane Shrybman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1072277542.10203.14.camel@mars.goatskin.org \
--to=shrybman@aei.ca \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®