Promise SX-6000 and kernel 2.6.x

Promise SX-6000 and kernel 2.6.x

[Alex Murphy]

Hello!!!

 I am sorry for the letter, but allow to address to you with my problem.
Has bought Promise SX-6000 Pro the controller and has established on him
Linux Redhat. All - is excellent!! Has updated a nucleus for 2.6.5 - I
can not pick up the controller in any way. Source codes of a nucleus
taking place on your site do not approach for 2.6 nucleus :( 

Can you know the possible decision of my problem??

 Yours faithfully and hope, Alexey.

P.S.1 firmware drivers for 2.4.x kernel download is 
http://www.eventus.de/linux.html

P.S.2

In make menuconfig has disconnected support of all PDC Promise. Has
included all I2O devices in a nucleus.

ns linux # cat .config|grep I2O
# I2O device support
CONFIG_I2O=y
CONFIG_I2O_PCI=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y


dmesg send 0 i2o controllers

I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 17
i2o: Checking for PCI I2O controllers...
I2O configuration manager v 0.04.
  (C) Copyright 1999 Red Hat Software
I2O Block Storage OSM v0.9
   (c) Copyright 1999-2001 Red Hat Software.
i2o_block: Checking for Boot device...
i2o_block: Checking for I2O Block devices...
i2o_scsi.c: Version 0.1.2
  chain_pool: 0 bytes @ f7ae85a0
  (512 byte buffers X 4 can_queue X 0 i2o controllers)


lspci:

02:02.1 Class ff00: Intel Corp. 80960RM [i960RM Microprocessor] (rev 02)
(prog-if 01)
        Subsystem: Promise Technology, Inc. SuperTrak SX6000 I2O CPU
        Flags: bus master, medium devsel, latency 32, IRQ 22
        Memory at f6000000 (32-bit, prefetchable) [size=4M]
        Expansion ROM at <unassigned> [disabled] [size=64K]

Promise SX-6000 and kernel 2.6.x

[Alex Murphy]

Hello!!!

 I am sorry for the letter, but allow to address to you with my problem.
Has bought Promise SX-6000 Pro the controller and has established on him
Linux Redhat. All - is excellent!! Has updated a nucleus for 2.6.5 - I
can not pick up the controller in any way. Source codes of a nucleus
taking place on your site do not approach for 2.6 nucleus :( 

Can you know the possible decision of my problem??

 Yours faithfully and hope, Alexey.

P.S.1 firmware drivers for 2.4.x kernel download is 
http://www.eventus.de/linux.html

P.S.2

In make menuconfig has disconnected support of all PDC Promise. Has
included all I2O devices in a nucleus.

ns linux # cat .config|grep I2O
# I2O device support
CONFIG_I2O=y
CONFIG_I2O_PCI=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y


dmesg send 0 i2o controllers

I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 17
i2o: Checking for PCI I2O controllers...
I2O configuration manager v 0.04.
  (C) Copyright 1999 Red Hat Software
I2O Block Storage OSM v0.9
   (c) Copyright 1999-2001 Red Hat Software.
i2o_block: Checking for Boot device...
i2o_block: Checking for I2O Block devices...
i2o_scsi.c: Version 0.1.2
  chain_pool: 0 bytes @ f7ae85a0
  (512 byte buffers X 4 can_queue X 0 i2o controllers)


lspci:

02:02.1 Class ff00: Intel Corp. 80960RM [i960RM Microprocessor] (rev 02)
(prog-if 01)
        Subsystem: Promise Technology, Inc. SuperTrak SX6000 I2O CPU
        Flags: bus master, medium devsel, latency 32, IRQ 22
        Memory at f6000000 (32-bit, prefetchable) [size=4M]
        Expansion ROM at <unassigned> [disabled] [size=64K]