Re: pcmcia on the T42p

Re: pcmcia on the T42p

[Dax Kelson]

On Sun, 2004-07-11 at 00:27, Rasmus Lerdorf wrote:
> You mentioned you couldn't get your T42 to see any pcmcia events with a
> Cisco Aironet 350 card.  I just tried it on mine and it worked fine.  I
> didn't boot with it and plugged it in and it came right up.  cardctl eject
> and re-inserted it about 10 times and each time it came back up fine.

More details and resolution.

When I tried Debian stable (with a 2.4 kernel), everything worked great
including audible "beeps" when I inserted/removed PCMCIA cards.

I upgraded to Debian testing and then unstable with the 2.6.7 kernel and
PCMCIA devices would only work if inserted prior to booting. This
matched my Fedora Core v2 experience with the latest errata kernel, or
with 2.6.7-mm.

With Debian testing/unstable using the Debian stable 2.4 kernel
everything was peachy.

I found that loading the BIOS default setting that made everything work
(minus the audible beeps). The default BIOS settings has a screen where
all IRQs are *forced* to be IRQ 11, and sure enough, cat
/proc/interrupts showed everything on 11. I had changed it to "Auto"
instead of "11" and cat /proc/interrupts showed everything spread
around. Everything seemed to work great, except PCMCIA.

Resetting my BIOS back to defaults and now PCMCIA hotplug is working.

It seems that it *should* work with interrupts not all clumped up on
IRQ 11 (and indeed, Windows does work with that config), but for now
at least, my PCMCIA slots are working.

Dax Kelson

Re: pcmcia on the T42p

[Rasmus Lerdorf]

On Mon, 12 Jul 2004, Dax Kelson wrote:
> Resetting my BIOS back to defaults and now PCMCIA hotplug is working.
>
> It seems that it *should* work with interrupts not all clumped up on
> IRQ 11 (and indeed, Windows does work with that config), but for now
> at least, my PCMCIA slots are working.

I don't actually get any beeps either, but mine works.  One of the first
things I did when I got this laptop was to "fix" those irqs.  I have mine
set to:

    A INT - 10
    B INT - 5
    C INT - 9
    D INT - 4
    E INT - 11
    F INT - 6
    G INT - 4
    H INT - 11

-Rasmus

Re: [ltp] Re: pcmcia on the T42p

[Dax Kelson]

On Mon, 2004-07-12 at 15:39, Dax Kelson wrote:
> On Sun, 2004-07-11 at 00:27, Rasmus Lerdorf wrote:
> > You mentioned you couldn't get your T42 to see any pcmcia events with a
> > Cisco Aironet 350 card.  I just tried it on mine and it worked fine.  I
> > didn't boot with it and plugged it in and it came right up.  cardctl eject
> > and re-inserted it about 10 times and each time it came back up fine.
> 
> More details and resolution.


I may have spoke too soon. 

When I say "not working" I mean that physically inserting the card
causes no hotplug activity to happen. If I do a "cardctl insert" then
card is brought up.

With a IBM T4X do you have to use "cardctl insert" or is just sliding
the card in enough? For a period of time earlier today just sliding the
card in was enough. I can't get that behavior back though.

Dax Kelson