From: Henry Molina <henrymolina@cmn-consulting.com>
To: linux-kernel@vger.kernel.org
Subject: EDD Support
Date: Mon, 09 Aug 2004 11:43:31 -0500 [thread overview]
Message-ID: <1092069811.2907.85.camel@prometeo> (raw)
Hi everyone,
I'm compiling kernel 2.6.7 with CONFIG_EDD fine, then I proceed to
install the module but I can't get the /proc/sys/firmware/edd entry.
Any Suggestion?.
Many Thanks,
Henry Molina
PD: I attach the dmidecode output
# dmidecode 2.2
SMBIOS 2.3 present.
31 structures occupying 1017 bytes.
Table at 0x000F0630.
Handle 0x0000
DMI type 0, 20 bytes.
BIOS Information
Vendor: American Megatrends Inc.
Version: 1.02
Release Date: 05/09/2003
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Handle 0x0001
DMI type 1, 25 bytes.
System Information
Manufacturer: Hewlett-Packard
Product Name: HP d220 MT (DC526A)
Version:
Serial Number: MXD33701GQ
UUID: 15F4C490-59EA-D711-851C-517B4801761B
Wake-up Type: Power Switch
Handle 0x0002
DMI type 2, 8 bytes.
Base Board Information
Manufacturer: Lite-On Tech.
Product Name: 0888h
Version:
Serial Number: 01234567
Handle 0x0003
DMI type 3, 17 bytes.
Chassis Information
Manufacturer: Hewlett-Packard
Type: Desktop
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Handle 0x0004
DMI type 4, 32 bytes.
Processor Information
Socket Designation: mPGA-478
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 29 0F 41 33 FF FB EB BF
Signature: Type 0, Family 34F, Model 12, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
SBF (Signal break on FERR)
Version: PENTIUM 4
Voltage: 2.9 V
External Clock: 133 MHz
Max Speed: 4000 MHz
Current Speed: 2400 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Handle 0x0005
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 8 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Pipeline Burst Synchronous
Speed: 40 ns
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 4-way Set-associative
Handle 0x0006
DMI type 7, 19 bytes.
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: 40 ns
Error Correction Type: Parity
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0007
DMI type 5, 20 bytes.
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities: None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 1024 MB
Maximum Total Memory Size: 2048 MB
Supported Speeds:
Other
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 2
0x0008
0x0009
Enabled Error Correcting Capabilities: None
Handle 0x0008
DMI type 6, 12 bytes.
Memory Module Information
Socket Designation: DIMM1
Bank Connections: 1 0
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 128 MB (Single-bank Connection)
Enabled Size: 128 MB (Single-bank Connection)
Error Status: OK
Handle 0x0009
DMI type 6, 12 bytes.
Memory Module Information
Socket Designation: DIMM2
Bank Connections: 3 2
Current Speed: Unknown
Type: Unknown
Installed Size: Not Installed (Single-bank Connection)
Enabled Size: Not Installed (Single-bank Connection)
Error Status: OK
Handle 0x000A
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000B
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000C
DMI type 9, 13 bytes.
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000D
DMI type 9, 13 bytes.
System Slot Information
Designation: AGP
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000E
DMI type 11, 5 bytes.
OEM Strings
String 1: SMBIOS Support from AMI
Handle 0x000F
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: USB0
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0010
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: USB1
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0011
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: USB2
Internal Connector Type: None
External Reference Designator: USB3
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0012
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: USB3
Internal Connector Type: None
External Reference Designator: USB4
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0013
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: USB4
Internal Connector Type: None
External Reference Designator: USB5
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0014
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: USB5
Internal Connector Type: None
External Reference Designator: USB6
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0015
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: COM1
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0016
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: LPT
Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)
External Reference Designator: LPT
External Connector Type: DB-25 male
Port Type: Parallel Port ECP/EPP
Handle 0x0017
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: KEYBOARD
Internal Connector Type: None
External Reference Designator: KEYBOARD
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0018
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: MOUSE
Internal Connector Type: None
External Reference Designator: MOUSE
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0019
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Floppy
Internal Connector Type: On Board Floppy
External Reference Designator: Floppy
External Connector Type: None
Port Type: None
Handle 0x001A
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Primary IDE
Internal Connector Type: On Board IDE
External Reference Designator: IDE-1
External Connector Type: None
Port Type: None
Handle 0x001B
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Secondary IDE
Internal Connector Type: On Board IDE
External Reference Designator: IDE-2
External Connector Type: None
Port Type: None
Handle 0x001C
DMI type 12, 5 bytes.
System Configuration Options
Option 1: System Management BIOS from Atlanta
Handle 0x001D
DMI type 13, 22 bytes.
BIOS Language Information
Installable Languages: 4
English
Traditional Chinese
Simplified Chinese
Japanese
Currently Installed Language: English
Handle 0x001E
DMI type 127, 4 bytes.
End Of Table
next reply other threads:[~2004-08-09 16:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-09 16:43 Henry Molina [this message]
2004-08-09 16:35 ` Randy.Dunlap
2004-08-09 17:44 ` Henry Molina
2004-08-09 20:10 ` Henry Molina
2004-08-09 20:14 ` Randy.Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1092069811.2907.85.camel@prometeo \
--to=henrymolina@cmn-consulting.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®