From: Serge Hallyn <serue@us.ibm.com>
To: akpm@osdl.org
Cc: Chris Wright <chrisw@osdl.org>,
linux-kernel@vger.kernel.org, serue@us.ibm.com
Subject: Re: [patch 3/3] lsm: add bsdjail documentation
Date: Wed, 06 Oct 2004 15:25:58 -0500 [thread overview]
Message-ID: <1097094358.6939.13.camel@serge.austin.ibm.com> (raw)
In-Reply-To: <1097094103.6939.5.camel@serge.austin.ibm.com>
Attached is a patch carrying the documentation for the bsdjail LSM.
Please apply.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
diff -Nrup linux-2.6.9-rc3-bk6/Documentation/bsdjail.txt linux-2.6.9-rc3-bk6-jail/Documentation/bsdjail.txt
--- linux-2.6.9-rc3-bk6/Documentation/bsdjail.txt 1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.9-rc3-bk6-jail/Documentation/bsdjail.txt 2004-10-06 10:51:46.000000000 -0500
@@ -0,0 +1,99 @@
+BSD Jail Linux Security Module
+Serge E. Hallyn <serue@us.ibm.com>
+
+Description:
+
+Implements a subset of the BSD Jail functionality as a Linux LSM.
+What is currently implemented:
+
+ If a proces is in a jail, it:
+
+ 1. Is locked under a chroot (as are all children) which is not
+ vulnerable to the well-known chdir(..)(etc)chroot(.) escape.
+ 2. Cannot mount or umount
+ 3. Cannot send signals outside of jail
+ 4. Cannot ptrace processes outside of jail
+ 5. Cannot create devices
+ 6. Cannot renice processes
+ 7. Cannot load or unload modules
+ 8. Cannot change network settings
+ 9. May be assigned a specific ip address which will be used
+ for all it's socket binds.
+ 10. Cannot see contents of /proc/<pid> entries of processes not in the
+ same jail. (We hide their existence for convenience's sake, but
+ their existance can still be detected using, for instance, statfs)
+ 11. Has no CAP_SYS_RAWIO capability (no ioperm/iopl)
+ 12. May not share IPC resources with processes outside its own jail.
+ 13. May find it's valid network address (if restricted) under
+ /proc/$$/attr/current.
+
+WARNINGS:
+The security of this module is very much dependent on the security
+of the rest of the system. You must carefully think through your
+use of the system.
+
+Some examples:
+ 1. If you leave /dev/hda1 in the jail, processes in the
+ jail can access that filesystem (i.e. /sbin/debugfs).
+ 2. If you provide root access within a jail, this can of
+ course be used to setuid binaries in the jail. Combined
+ with an unjailed regular user account, this gives jailed
+ users unjailed root access. (thanks to Brad Spender for
+ pointing this out). To protect against this, use jails
+ in private namespaces, with the jail filesystems mounted
+ ONLY within the jail namespaces. For instance:
+
+$ # (Make sure /dev/hdc5 is not mounted anywhere)
+$ new_namespace_shell /bin/bash
+$ mount /dev/hdc5 /opt
+$ mount -t proc proc /opt/proc
+$ echo -n "root /opt" > /proc/$$/attr/exec
+$ echo -n "ip 9.53.94.111" > /proc/$$/attr/exec
+$ exec /bin/sh
+$ sshd
+$ apachectl start
+$ exit
+
+How to use:
+ 1. modprobe bsdjail
+ [ 1.5 /sbin/ifconfig eth0:0 2.2.2.2;
+ 1.6 /sbin/route add -host 2.2.2.2 dev eth0:0
+ (optional) ]
+ 2. Make sure the root filesystem (ie /dev/hdc5) is not mounted
+ anywhere else.
+ 3. exec_private_namespace /bin/sh
+ 4. mount /dev/hdc5 /opt
+ 5. mount -t proc proc /opt/proc
+ 6. echo -n "root /opt" > /proc/$$/attr/exec
+ echo -n "ip 2.2.2.2" > /proc/$$/attr/exec (optional)
+ 7. exec /bin/sh
+ 8. sshd
+ 9. exit
+
+The new shell will now run in a private jail on the filesystem on
+/dev/hdc5. If proc has been mounted under /dev/hdc5, then a "ps -auxw"
+under the jailed shell will show only entries for processes started under
+that jail.
+
+If a private IP was specified for the jail, then
+ cat /proc/$$/attr/current
+will show the address for the private network device. Other network
+devices will be visible through /sbin/ifconfig -a, but not usable.
+
+If the reading process is not in a jail, then
+ cat /proc/$$/attr/current
+returns information about the root and ip * for the target process,
+or "Not Jailed" if the target process is not jailed.
+
+Cat /proc/$$/attr/exec gives a list of the valid keywords to cat into
+/proc/$$/attr/exec when starting a jail.
+
+Current valid keywords for creating a jail are:
+
+ root: Root of jail's fs
+ ip: Ip addr for this jail
+ nrtask: Number of tasks in this jail
+ nice: The nice level for this jail. (maybe should be min/max?)
+ slice: Max timeslice per process
+ data: Max size of DATA segment per process
+ memlock: Max size of memory which can be locked per process
next prev parent reply other threads:[~2004-10-06 19:20 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-06 20:21 (patch 1/3) lsm: add control over /proc/<pid> visibility Serge Hallyn
2004-10-06 20:24 ` [patch 1/3] lsm: add bsdjail module Serge Hallyn
2004-10-06 23:26 ` Andrew Morton
2004-10-07 4:08 ` Serge E. Hallyn
2004-10-07 6:18 ` James Morris
2004-10-07 6:22 ` Andrew Morton
2004-10-07 16:06 ` Chris Wright
2004-10-07 18:40 ` Andrew Morton
2004-10-07 18:52 ` Chris Wright
2004-10-07 20:56 ` Serge E. Hallyn
2004-10-10 6:24 ` Herbert Poetzl
2004-10-07 12:06 ` Alan Cox
2004-10-07 19:01 ` [patch 2/3] " Serge E. Hallyn
2004-10-07 19:42 ` Chris Wright
2004-10-07 20:05 ` Andrew Morton
2004-10-08 18:05 ` Serge E. Hallyn
2004-10-10 10:41 ` Christoph Hellwig
2004-10-10 11:31 ` Serge E. Hallyn
2004-10-10 11:34 ` Christoph Hellwig
2004-10-11 13:47 ` Alan Cox
2004-10-12 7:00 ` Herbert Poetzl
2004-10-12 9:00 ` Christoph Hellwig
2004-10-12 12:27 ` Herbert Poetzl
2004-10-20 15:36 ` Christoph Hellwig
2004-10-20 19:18 ` Herbert Poetzl
2004-10-12 13:11 ` Serge E. Hallyn
2004-10-12 14:15 ` Christoph Hellwig
2004-10-12 22:35 ` Ulrich Drepper
2004-10-13 0:58 ` Serge E. Hallyn
2004-10-13 1:09 ` Ulrich Drepper
2004-10-13 1:22 ` Serge E. Hallyn
2004-10-13 15:26 ` Stephen Smalley
2004-10-13 1:11 ` Chris Wright
2004-10-13 14:25 ` Stephen Smalley
2004-10-06 20:25 ` Serge Hallyn [this message]
2004-10-07 22:17 ` lsm: add bsdjail documentation Matthias Urlichs
2004-10-08 20:02 ` Serge E. Hallyn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1097094358.6939.13.camel@serge.austin.ibm.com \
--to=serue@us.ibm.com \
--cc=akpm@osdl.org \
--cc=chrisw@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®