mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Josh Boyer <jdub@us.ibm.com>
To: Greg KH <greg@kroah.com>
Cc: linux-kernel@vger.kernel.org, linux-usb-devel@lists.sourceforge.net
Subject: Re: [RFC PATCH] convert uhci-hcd to use debugfs
Date: Fri, 10 Dec 2004 08:15:18 -0600	[thread overview]
Message-ID: <1102688117.26320.7.camel@weaponx.rchland.ibm.com> (raw)
In-Reply-To: <20041210005514.GB17822@kroah.com>

On Thu, 2004-12-09 at 18:55, Greg KH wrote:
> diff -Nru a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
> --- a/drivers/usb/host/uhci-debug.c	2004-12-09 16:32:17 -08:00
> +++ b/drivers/usb/host/uhci-debug.c	2004-12-09 16:32:17 -08:00
> @@ -11,7 +11,7 @@
>  
>  #include <linux/config.h>
>  #include <linux/kernel.h>
> -#include <linux/proc_fs.h>
> +#include <linux/debugfs.h>
>  #include <linux/smp_lock.h>
>  #include <asm/io.h>
>  
> @@ -507,7 +496,7 @@
>  
>  #define MAX_OUTPUT	(64 * 1024)
>  
> -static struct proc_dir_entry *uhci_proc_root = NULL;
> +static struct dentry *uhci_debugfs_root = NULL;
>  
>  struct uhci_proc {
>  	int size;
> @@ -517,8 +506,7 @@
>  
>  static int uhci_proc_open(struct inode *inode, struct file *file)
>  {

Didn't want to rename this uhci_debug_open?

> -	const struct proc_dir_entry *dp = PDE(inode);
> -	struct uhci_hcd *uhci = dp->data;
> +	struct uhci_hcd *uhci = inode->u.generic_ip;
>  	struct uhci_proc *up;
>  	int ret = -ENOMEM;
>  
> diff -Nru a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
> --- a/drivers/usb/host/uhci-hcd.c	2004-12-09 16:32:31 -08:00
> +++ b/drivers/usb/host/uhci-hcd.c	2004-12-09 16:32:31 -08:00
> @@ -46,7 +46,7 @@
>  #include <linux/unistd.h>
>  #include <linux/interrupt.h>
>  #include <linux/spinlock.h>
> -#include <linux/proc_fs.h>
> +#include <linux/debugfs.h>
>  #include <linux/pm.h>
>  #include <linux/dmapool.h>
>  #include <linux/dma-mapping.h>
> @@ -1927,12 +1927,10 @@
>  		uhci->fl = NULL;
>  	}
>  
> -#ifdef CONFIG_PROC_FS
> -	if (uhci->proc_entry) {
> -		remove_proc_entry(uhci->hcd.self.bus_name, uhci_proc_root);
> -		uhci->proc_entry = NULL;
> +	if (uhci->dentry) {
> +		debugfs_remove(uhci->dentry);
> +		uhci->dentry = NULL;
>  	}
> -#endif
>  }
>  
>  static int uhci_reset(struct usb_hcd *hcd)
> @@ -1972,25 +1970,17 @@
>  	unsigned io_size;
>  	dma_addr_t dma_handle;
>  	struct usb_device *udev;
> -#ifdef CONFIG_PROC_FS
> -	struct proc_dir_entry *ent;
> -#endif
> +	struct dentry *dentry;
>  
>  	io_size = pci_resource_len(to_pci_dev(uhci_dev(uhci)), hcd->region);
>  
> -#ifdef CONFIG_PROC_FS
> -	ent = create_proc_entry(hcd->self.bus_name, S_IFREG|S_IRUGO|S_IWUSR, uhci_proc_root);
> -	if (!ent) {
> -		dev_err(uhci_dev(uhci), "couldn't create uhci proc entry\n");
> +	dentry = debugfs_create_file(hcd->self.bus_name, S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, uhci, &uhci_proc_operations);
> +	if (!dentry) {

That won't work if debugfs is not configured.  You'll get back (void *)
-ENODEV, which is not NULL.

> +		dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n");
>  		retval = -ENOMEM;
>  		goto err_create_proc_entry;
>  	}
> -
> -	ent->data = uhci;
> -	ent->proc_fops = &uhci_proc_operations;
> -	ent->size = 0;
> -	uhci->proc_entry = ent;
> -#endif
> +	uhci->dentry = dentry;
>  
>  	uhci->fsbr = 0;
>  	uhci->fsbrtimeout = 0;
> @@ -2192,13 +2182,10 @@
>  	uhci->fl = NULL;
>  
>  err_alloc_fl:
> -#ifdef CONFIG_PROC_FS
> -	remove_proc_entry(hcd->self.bus_name, uhci_proc_root);
> -	uhci->proc_entry = NULL;
> +	debugfs_remove(uhci->dentry);
> +	uhci->dentry = NULL;
>  
>  err_create_proc_entry:
> -#endif
> -
>  	return retval;
>  }
>  
> @@ -2405,11 +2392,9 @@
>  			goto errbuf_failed;
>  	}
>  
> -#ifdef CONFIG_PROC_FS
> -	uhci_proc_root = create_proc_entry("driver/uhci", S_IFDIR, NULL);
> -	if (!uhci_proc_root)
> +	uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
> +	if (!uhci_debugfs_root)

Same thing here.

>  		goto proc_failed;
> -#endif
>  
>  	uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
>  		sizeof(struct urb_priv), 0, 0, NULL, NULL);

josh


  reply	other threads:[~2004-12-10 14:15 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-12-10  0:50 [RFC PATCH] debugfs - yet another in-kernel file system Greg KH
2004-12-10  0:55 ` [RFC PATCH] convert uhci-hcd to use debugfs Greg KH
2004-12-10 14:15   ` Josh Boyer [this message]
2004-12-10 15:27     ` Greg KH
2004-12-10 16:21       ` Josh Boyer
2004-12-10 17:17         ` Comments on new kernel dev. model Peter Karlsson
2004-12-10 23:44           ` Greg KH
2004-12-10  7:07 ` [RFC PATCH] debugfs - yet another in-kernel file system Jan Engelhardt
2004-12-10  7:54   ` Greg KH
2004-12-10  8:00     ` Jan Engelhardt
2004-12-10 16:02       ` Greg KH
2004-12-10 14:46 ` Josh Boyer
2004-12-10 15:30   ` Greg KH
2004-12-10 16:26     ` Josh Boyer
2004-12-10 17:21 ` Jörn Engel
2004-12-10 17:35   ` Greg KH
2004-12-10 18:29     ` Jörn Engel
2004-12-10 19:38 ` Roland Dreier
2004-12-11  1:29 ` [linux-usb-devel] " David Brownell
2004-12-11  1:39   ` Greg KH
2004-12-11  2:02     ` David Brownell
2004-12-11  2:05       ` Greg KH
2004-12-11  2:26     ` Roland Dreier
2004-12-11  2:32       ` Greg KH
2004-12-11 13:23         ` Roland Dreier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1102688117.26320.7.camel@weaponx.rchland.ibm.com \
    --to=jdub@us.ibm.com \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®