mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Baochen Qiang <quic_bqiang@quicinc.com>
To: Johan Hovold <johan+linaro@kernel.org>,
	Jeff Johnson <jjohnson@kernel.org>
Cc: Miaoqing Pan <quic_miaoqing@quicinc.com>,
	Remi Pommarel <repk@triplefau.lt>,
	<linux-wireless@vger.kernel.org>, <ath12k@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <stable@vger.kernel.org>
Subject: Re: [PATCH v3 1/4] wifi: ath12k: fix dest ring-buffer corruption
Date: Wed, 25 Jun 2025 09:53:28 +0800	[thread overview]
Message-ID: <11124601-a0bb-40a9-a101-bb83d7756ab4@quicinc.com> (raw)
In-Reply-To: <20250617084402.14475-2-johan+linaro@kernel.org>



On 6/17/2025 4:43 PM, Johan Hovold wrote:
> Add the missing memory barrier to make sure that destination ring
> descriptors are read after the head pointers to avoid using stale data
> on weakly ordered architectures like aarch64.
> 
> The barrier is added to the ath12k_hal_srng_access_begin() helper for
> symmetry with follow-on fixes for source ring buffer corruption which
> will add barriers to ath12k_hal_srng_access_end().
> 
> Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
> 
> Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
> Cc: stable@vger.kernel.org	# 6.3
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>  drivers/net/wireless/ath/ath12k/ce.c  |  3 ---
>  drivers/net/wireless/ath/ath12k/hal.c | 17 ++++++++++++++---
>  2 files changed, 14 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/ath12k/ce.c b/drivers/net/wireless/ath/ath12k/ce.c
> index 3f3439262cf4..f7c15b547504 100644
> --- a/drivers/net/wireless/ath/ath12k/ce.c
> +++ b/drivers/net/wireless/ath/ath12k/ce.c
> @@ -433,9 +433,6 @@ static int ath12k_ce_completed_recv_next(struct ath12k_ce_pipe *pipe,
>  		goto err;
>  	}
>  
> -	/* Make sure descriptor is read after the head pointer. */
> -	dma_rmb();
> -
>  	*nbytes = ath12k_hal_ce_dst_status_get_length(desc);
>  
>  	*skb = pipe->dest_ring->skb[sw_index];
> diff --git a/drivers/net/wireless/ath/ath12k/hal.c b/drivers/net/wireless/ath/ath12k/hal.c
> index a301898e5849..f8bd3837b9dc 100644
> --- a/drivers/net/wireless/ath/ath12k/hal.c
> +++ b/drivers/net/wireless/ath/ath12k/hal.c
> @@ -2143,13 +2143,24 @@ void *ath12k_hal_srng_src_get_next_reaped(struct ath12k_base *ab,
>  
>  void ath12k_hal_srng_access_begin(struct ath12k_base *ab, struct hal_srng *srng)
>  {
> +	u32 hp;
> +
>  	lockdep_assert_held(&srng->lock);
>  
> -	if (srng->ring_dir == HAL_SRNG_DIR_SRC)
> +	if (srng->ring_dir == HAL_SRNG_DIR_SRC) {
>  		srng->u.src_ring.cached_tp =
>  			*(volatile u32 *)srng->u.src_ring.tp_addr;
> -	else
> -		srng->u.dst_ring.cached_hp = READ_ONCE(*srng->u.dst_ring.hp_addr);
> +	} else {
> +		hp = READ_ONCE(*srng->u.dst_ring.hp_addr);
> +
> +		if (hp != srng->u.dst_ring.cached_hp) {
> +			srng->u.dst_ring.cached_hp = hp;
> +			/* Make sure descriptor is read after the head
> +			 * pointer.
> +			 */
> +			dma_rmb();
> +		}
> +	}
>  }
>  
>  /* Update cached ring head/tail pointers to HW. ath12k_hal_srng_access_begin()

Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com>



  reply	other threads:[~2025-06-25  1:53 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-17  8:43 [PATCH v3 0/4] " Johan Hovold
2025-06-17  8:43 ` [PATCH v3 1/4] " Johan Hovold
2025-06-25  1:53   ` Baochen Qiang [this message]
2025-06-17  8:44 ` [PATCH v3 2/4] wifi: ath12k: use plain access for descriptor length Johan Hovold
2025-06-25  1:53   ` Baochen Qiang
2025-06-17  8:44 ` [PATCH v3 3/4] wifi: ath12k: fix source ring-buffer corruption Johan Hovold
2025-06-25  1:54   ` Baochen Qiang
2025-06-17  8:44 ` [PATCH v3 4/4] wifi: ath12k: fix dest ring-buffer corruption when ring is full Johan Hovold
2025-06-25  1:54   ` Baochen Qiang
2025-06-26 23:15 ` [PATCH v3 0/4] wifi: ath12k: fix dest ring-buffer corruption Jeff Johnson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11124601-a0bb-40a9-a101-bb83d7756ab4@quicinc.com \
    --to=quic_bqiang@quicinc.com \
    --cc=ath12k@lists.infradead.org \
    --cc=jjohnson@kernel.org \
    --cc=johan+linaro@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=quic_miaoqing@quicinc.com \
    --cc=repk@triplefau.lt \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®