From: Aaron Gaudio <prothonotar@tarnation.dyndns.org>
To: linux-kernel@vger.kernel.org
Subject: Re: Software Suspend on Sony Vaio R505E
Date: Mon, 04 Apr 2005 12:27:27 -0400 [thread overview]
Message-ID: <1112632048.5797.26.camel@localhost.localdomain> (raw)
In-Reply-To: <1112580660.5797.23.camel@localhost.localdomain>
[-- Attachment #1: Type: text/plain, Size: 84 bytes --]
Ooops! I selected the wrong file to attach. Here is the proper syslog
attachment...
[-- Attachment #2: suspend_log.txt --]
[-- Type: text/plain, Size: 4134 bytes --]
/var/log/messages:
Apr 3 13:07:04 localhost kernel: .swsusp: Restoring Highmem
Apr 3 13:07:04 localhost kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9
Apr 3 13:07:06 localhost kernel: ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI
Apr 3 13:07:07 localhost kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9
Apr 3 13:07:09 localhost kernel: ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 9 (level, low) -> IRQ 9
Apr 3 13:07:09 localhost kernel: Restarting tasks... done
Apr 3 13:07:09 localhost kernel: eth1: New link status: Connected (0001)
Apr 3 13:07:10 localhost kernel: usb 3-1: USB disconnect, address 2
Apr 3 13:07:10 localhost kernel: sda : READ CAPACITY failed.
Apr 3 13:07:10 localhost kernel: sda : status=0, message=00, host=1, driver=00
Apr 3 13:07:10 localhost kernel: sda : sense not available.
Apr 3 13:07:10 localhost kernel: sda: Write Protect is off
Apr 3 13:07:10 localhost kernel: sda: assuming drive cache: write through
Apr 3 13:07:10 localhost kernel: sda : READ CAPACITY failed.
Apr 3 13:07:10 localhost kernel: sda : status=0, message=00, host=1, driver=00
Apr 3 13:07:10 localhost kernel: sda : sense not available.
Apr 3 13:07:10 localhost kernel: sda: Write Protect is off
Apr 3 13:07:10 localhost kernel: sda: assuming drive cache: write through
Apr 3 13:07:10 localhost kernel: sda:<3>scsi0 (0:0): rejecting I/O to device being removed
Apr 3 13:07:10 localhost kernel: Buffer I/O error on device sda, logical block 0
Apr 3 13:07:10 localhost kernel: scsi0 (0:0): rejecting I/O to device being removed
Apr 3 13:07:10 localhost kernel: Buffer I/O error on device sda, logical block 0
Apr 3 13:07:10 localhost kernel: scsi0 (0:0): rejecting I/O to device being removed
Apr 3 13:07:10 localhost kernel: Buffer I/O error on device sda, logical block 0
Apr 3 13:07:10 localhost kernel: unable to read partition table
Apr 3 13:07:10 localhost kernel: usb 3-1: new full speed USB device using uhci_hcd and address 3
Apr 3 13:07:12 localhost kernel: NETDEV WATCHDOG: eth1: transmit timed out
Apr 3 13:07:12 localhost kernel: eth1: Tx timeout! ALLOCFID=00c0, TXCOMPLFID=00bf, EVSTAT=808b
Apr 3 13:07:15 localhost kernel: eth1: New link status: Connected (0001)
Apr 3 13:07:18 localhost kernel: NETDEV WATCHDOG: eth1: transmit timed out
Apr 3 13:07:18 localhost kernel: eth1: Tx timeout! ALLOCFID=00c0, TXCOMPLFID=00bf, EVSTAT=808b
Apr 3 13:07:25 localhost kernel: eth1: New link status: Connected (0001)
Apr 3 13:07:25 localhost kernel: usb 3-1: 05-wait_for_sys timed out on ep0in
Apr 3 13:07:25 localhost kernel: usb 3-1: khubd timed out on ep0in
Apr 3 13:07:26 localhost kernel: NETDEV WATCHDOG: eth1: transmit timed out
Apr 3 13:07:26 localhost kernel: eth1: Tx timeout! ALLOCFID=00c0, TXCOMPLFID=00bf, EVSTAT=808b
Apr 3 13:07:30 localhost kernel: usb 3-1: khubd timed out on ep0in
Apr 3 13:07:30 localhost kernel: usb 3-1: string descriptor 0 read error: -110
Apr 3 13:07:33 localhost NET: /sbin/dhclient-script : updated /etc/resolv.conf
Apr 3 13:07:35 localhost kernel: usb 3-1: 05-wait_for_sys timed out on ep0in
Apr 3 13:07:35 localhost hal.hotplug[8361]: timout(10000 ms) waiting for /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0
Apr 3 13:07:36 localhost hald[4527]: Timed out waiting for hotplug event 785. Rebasing to 786
Apr 3 13:07:40 localhost kernel: usb 3-1: khubd timed out on ep0in
Apr 3 13:07:45 localhost kernel: usb 3-1: khubd timed out on ep0in
Apr 3 13:07:45 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Apr 3 13:07:45 localhost kernel: usb 3-1: 05-wait_for_sys timed out on ep0in
Apr 3 13:07:55 localhost kernel: usb 3-1: hald timed out on ep0in
Apr 3 13:08:10 localhost kernel: usb 3-1: hald timed out on ep0in
Apr 3 13:08:10 localhost kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 3
Apr 3 13:08:30 localhost kernel: usb 3-1: hald timed out on ep0in
Apr 3 13:08:35 localhost kernel: scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0
Apr 3 13:08:40 localhost kernel: usb 3-1: hald timed out on ep0in
prev parent reply other threads:[~2005-04-04 16:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-04 2:10 Aaron Gaudio
2005-04-04 16:27 ` Aaron Gaudio [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1112632048.5797.26.camel@localhost.localdomain \
--to=prothonotar@tarnation.dyndns.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®