Software Suspend on Sony Vaio R505E

Software Suspend on Sony Vaio R505E

[Aaron Gaudio]

[-- Attachment #1: Type: text/plain, Size: 1888 bytes --]

(I'm not currently subscribed to the kernel mailing list, please CC any
replies to my account.)

I've been trying hibernate on my Sony Vaio R505E using Software Suspend.
I'm using the following command:
echo -n "disk" > /sys/power/state

The basic suspend/resume seems to be working now (after many failed
attempts at the past). 

However, there are still a few problems...

I'm using Fedora Core 3 with the fedora kernel 2.6.10-1.770 kernel,
rebuilt to enable software suspend (and USB suspend). At some point,
I'll be trying the software suspend 2 patch to see how far that can get
me. Attached is the output of my syslog after the resume.

My wireless adapter doesn't work on resume. It's a built-in using the
orinoco_cs driver. I get the following messages in /var/log/messages:

Apr  3 13:07:12 localhost kernel: NETDEV WATCHDOG: eth1: transmit timed
out
Apr  3 13:07:12 localhost kernel: eth1: Tx timeout! ALLOCFID=00c0,
TXCOMPLFID=00bf, EVSTAT=808b

I also get a bunch of messages about usb problems, though I don't have a
USB device connected at the time:

Apr  3 13:07:25 localhost kernel: usb 3-1: 05-wait_for_sys timed out on
ep0in
Apr  3 13:07:25 localhost kernel: usb 3-1: khubd timed out on ep0in
Apr  3 13:07:30 localhost kernel: usb 3-1: khubd timed out on ep0in
Apr  3 13:07:30 localhost kernel: usb 3-1: string descriptor 0 read
error: -110

... and so forth...

Finally, trying to use 3D fails after resuming (Intel 830 using the i915
DRM module). glxgears gives this error: "intelWaitIrq: drmI830IrqWait:
-16" and syslog has "Apr  3 20:29:53 localhost kernel:
[drm:i915_wait_irq] *ERROR* i915_wait_irq: EBUSY -- rec: 0 emitted: 5".
After restarting X, 3D works as usual.

If there's any further debug or investigation I can do, or any tricks to
try, lemme know. I'll try out Software Suspend 2 when I get a chance.

-- 
Aaron Gaudio <prothonotar@tarnation.dyndns.org>

[-- Attachment #2: suspend.sh --]
[-- Type: application/x-shellscript, Size: 40367 bytes --]

Re: Software Suspend on Sony Vaio R505E

[Aaron Gaudio]

[-- Attachment #1: Type: text/plain, Size: 84 bytes --]

Ooops! I selected the wrong file to attach. Here is the proper syslog
attachment...

[-- Attachment #2: suspend_log.txt --]
[-- Type: text/plain, Size: 4134 bytes --]

/var/log/messages:
Apr  3 13:07:04 localhost kernel: .swsusp: Restoring Highmem
Apr  3 13:07:04 localhost kernel: ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9
Apr  3 13:07:06 localhost kernel: ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI
Apr  3 13:07:07 localhost kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9
Apr  3 13:07:09 localhost kernel: ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 9 (level, low) -> IRQ 9
Apr  3 13:07:09 localhost kernel: Restarting tasks... done
Apr  3 13:07:09 localhost kernel: eth1: New link status: Connected (0001)
Apr  3 13:07:10 localhost kernel: usb 3-1: USB disconnect, address 2
Apr  3 13:07:10 localhost kernel: sda : READ CAPACITY failed.
Apr  3 13:07:10 localhost kernel: sda : status=0, message=00, host=1, driver=00
Apr  3 13:07:10 localhost kernel: sda : sense not available.
Apr  3 13:07:10 localhost kernel: sda: Write Protect is off
Apr  3 13:07:10 localhost kernel: sda: assuming drive cache: write through
Apr  3 13:07:10 localhost kernel: sda : READ CAPACITY failed.
Apr  3 13:07:10 localhost kernel: sda : status=0, message=00, host=1, driver=00
Apr  3 13:07:10 localhost kernel: sda : sense not available.
Apr  3 13:07:10 localhost kernel: sda: Write Protect is off
Apr  3 13:07:10 localhost kernel: sda: assuming drive cache: write through
Apr  3 13:07:10 localhost kernel:  sda:<3>scsi0 (0:0): rejecting I/O to device being removed
Apr  3 13:07:10 localhost kernel: Buffer I/O error on device sda, logical block 0
Apr  3 13:07:10 localhost kernel: scsi0 (0:0): rejecting I/O to device being removed
Apr  3 13:07:10 localhost kernel: Buffer I/O error on device sda, logical block 0
Apr  3 13:07:10 localhost kernel: scsi0 (0:0): rejecting I/O to device being removed
Apr  3 13:07:10 localhost kernel: Buffer I/O error on device sda, logical block 0
Apr  3 13:07:10 localhost kernel:  unable to read partition table
Apr  3 13:07:10 localhost kernel: usb 3-1: new full speed USB device using uhci_hcd and address 3
Apr  3 13:07:12 localhost kernel: NETDEV WATCHDOG: eth1: transmit timed out
Apr  3 13:07:12 localhost kernel: eth1: Tx timeout! ALLOCFID=00c0, TXCOMPLFID=00bf, EVSTAT=808b
Apr  3 13:07:15 localhost kernel: eth1: New link status: Connected (0001)
Apr  3 13:07:18 localhost kernel: NETDEV WATCHDOG: eth1: transmit timed out
Apr  3 13:07:18 localhost kernel: eth1: Tx timeout! ALLOCFID=00c0, TXCOMPLFID=00bf, EVSTAT=808b
Apr  3 13:07:25 localhost kernel: eth1: New link status: Connected (0001)
Apr  3 13:07:25 localhost kernel: usb 3-1: 05-wait_for_sys timed out on ep0in
Apr  3 13:07:25 localhost kernel: usb 3-1: khubd timed out on ep0in
Apr  3 13:07:26 localhost kernel: NETDEV WATCHDOG: eth1: transmit timed out
Apr  3 13:07:26 localhost kernel: eth1: Tx timeout! ALLOCFID=00c0, TXCOMPLFID=00bf, EVSTAT=808b
Apr  3 13:07:30 localhost kernel: usb 3-1: khubd timed out on ep0in
Apr  3 13:07:30 localhost kernel: usb 3-1: string descriptor 0 read error: -110
Apr  3 13:07:33 localhost NET: /sbin/dhclient-script : updated /etc/resolv.conf
Apr  3 13:07:35 localhost kernel: usb 3-1: 05-wait_for_sys timed out on ep0in
Apr  3 13:07:35 localhost hal.hotplug[8361]: timout(10000 ms) waiting for /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0
Apr  3 13:07:36 localhost hald[4527]: Timed out waiting for hotplug event 785. Rebasing to 786
Apr  3 13:07:40 localhost kernel: usb 3-1: khubd timed out on ep0in
Apr  3 13:07:45 localhost kernel: usb 3-1: khubd timed out on ep0in
Apr  3 13:07:45 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Apr  3 13:07:45 localhost kernel: usb 3-1: 05-wait_for_sys timed out on ep0in
Apr  3 13:07:55 localhost kernel: usb 3-1: hald timed out on ep0in
Apr  3 13:08:10 localhost kernel: usb 3-1: hald timed out on ep0in
Apr  3 13:08:10 localhost kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 3
Apr  3 13:08:30 localhost kernel: usb 3-1: hald timed out on ep0in
Apr  3 13:08:35 localhost kernel: scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0
Apr  3 13:08:40 localhost kernel: usb 3-1: hald timed out on ep0in