* [PATCH/RFC 0/2] simple SPI controller on PXA2xx SSP port
@ 2005-10-05 20:13 Stephen Street
0 siblings, 0 replies; only message in thread
From: Stephen Street @ 2005-10-05 20:13 UTC (permalink / raw)
To: linux-kernel; +Cc: david-b
Following this will be two reposted patches (with whitespace correctly
preserved), releasing an initial "SPI controller" implementation running
on David Brownell's "simple SPI framework" and a prototype "SPI
protocol" driver for the Cirrus Logic CS8415A S/PDIF decoder chip. The
controller should run on any PXA2xx SSP port and has been tested on the
PXA255 NSSP port. Complete board setup and description facilities per
the SPI framework are supported.
Your comments and suggestions encouraged! You can e-mail me directly if
you have any question regarding running SPI controller on your board.
Thank you David for helping me make this real!
Stephen Street
"Afflicted by numerous newbie problems"
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-10-05 20:14 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-10-05 20:13 [PATCH/RFC 0/2] simple SPI controller on PXA2xx SSP port Stephen Street
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome