* PATCH: Bluesmoke missing renames
@ 2005-10-21 13:37 Alan Cox
2005-10-21 13:13 ` Jesper Juhl
0 siblings, 1 reply; 2+ messages in thread
From: Alan Cox @ 2005-10-21 13:37 UTC (permalink / raw)
To: linux-kernel, akpm
As was noted on and off list a couple of places still had old naming
Signed-off-by: Alan Cox <alan@redhat.com>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.14-rc4-mm1/drivers/edac/Kconfig linux-2.6.14-rc4-mm1/drivers/edac/Kconfig
--- linux.vanilla-2.6.14-rc4-mm1/drivers/edac/Kconfig 2005-10-20 16:12:39.000000000 +0100
+++ linux-2.6.14-rc4-mm1/drivers/edac/Kconfig 2005-10-20 17:05:58.000000000 +0100
@@ -34,9 +34,9 @@
depends on EDAC
help
Some systems are able to detect and correct errors in main
- memory. Bluesmoke can report statistics on memory error
+ memory. EDAC can report statistics on memory error
detection and correction (EDAC - or commonly referred to ECC
- errors). Bluesmoke will also try to decode where these errors
+ errors). EDAC will also try to decode where these errors
occurred so that a particular failing memory module can be
replaced. If unsure, select 'Y'.
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.14-rc4-mm1/drivers/edac/e752x_edac.c linux-2.6.14-rc4-mm1/drivers/edac/e752x_edac.c
--- linux.vanilla-2.6.14-rc4-mm1/drivers/edac/e752x_edac.c 2005-10-20 16:12:39.000000000 +0100
+++ linux-2.6.14-rc4-mm1/drivers/edac/e752x_edac.c 2005-10-20 17:06:17.000000000 +0100
@@ -13,7 +13,7 @@
* Wang Zhenyu at intel.com
* Dave Jiang at mvista.com
*
- * $Id: bluesmoke_e752x.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $
+ * $Id: edac_e752x.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $
*
*/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-10-21 13:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-10-21 13:37 PATCH: Bluesmoke missing renames Alan Cox
2005-10-21 13:13 ` Jesper Juhl
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®