Re: [PATCH v2 1/2] power: supply: max17042_battery: Clear status bits in interrupt handler

[Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>]

On wtorek, 14 września 2021 14:18:05 CEST Sebastian Krzyszkowiak wrote:
> The gauge requires us to clear the status bits manually for some alerts
> to be properly dismissed. Previously the IRQ was configured to react only
> on falling edge, which wasn't technically correct (the ALRT line is active
> low), but it had a happy side-effect of preventing interrupt storms
> on uncleared alerts from happening.
> 
> Fixes: 7fbf6b731bca ("power: supply: max17042: Do not enforce (incorrect)
> interrupt trigger type") Cc: <stable@vger.kernel.org>
> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
> ---
> v2: added a comment on why it clears all alert bits
> ---
>  drivers/power/supply/max17042_battery.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/power/supply/max17042_battery.c
> b/drivers/power/supply/max17042_battery.c index 8dffae76b6a3..da78ffe6a3ec
> 100644
> --- a/drivers/power/supply/max17042_battery.c
> +++ b/drivers/power/supply/max17042_battery.c
> @@ -876,6 +876,10 @@ static irqreturn_t max17042_thread_handler(int id, void
> *dev) max17042_set_soc_threshold(chip, 1);
>  	}
> 
> +	/* we implicitly handle all alerts via power_supply_changed */
> +	regmap_clear_bits(chip->regmap, MAX17042_STATUS,
> +			  0xFFFF & ~(STATUS_POR_BIT | 
STATUS_BST_BIT));
> +
>  	power_supply_changed(chip->battery);
>  	return IRQ_HANDLED;
>  }

Ping? Seems this didn't get applied yet.

S.