From: Sergio Monteiro Basto <sergio@sergiomb.no-ip.org>
To: Johnny Strom <johnny.strom@osp.fi>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Patch to make VIA sata board bootable again.
Date: Fri, 01 Sep 2006 12:49:12 +0100 [thread overview]
Message-ID: <1157111352.3491.1.camel@localhost.localdomain> (raw)
In-Reply-To: <44F7EC15.8040800@osp.fi>
Hi, Can you give me the information of interrupts
cat /proc/interrupts
XT_PIC or IO-APIC-edge/level ?
On Fri, 2006-09-01 at 11:15 +0300, Johnny Strom wrote:
>
> Hello
>
> The quirks.c update that went into 2.6.16.17 made an VIA machine here
> non bootable from an sata drive (via_sata), the error is:
>
> "ATA1 qc timout"
> "Failed to set xfermode".
>
> And later kernel panic becouse no sata disk was found.
> I tracked it down to the quirk update in 2.6.16.17. Below is a patch
> against 2.6.17.11 that reverses the uppdate and makse the system
> bootable again.
>
> Another option is to find out the PCI_DEVICE_ID_VIA for the motherboard
> in question but I could not get that info. Dose someone have an idea how
> to find that info? then I can provide an patch that adds the right
> PCI_DEVICE_ID_VIA for my motherboard.
>
>
>
> diff -ur linux-2.6.17.11-org/drivers/pci/quirks.c
> linux-2.6.17.11/drivers/pci/quirks.c
> --- linux-2.6.17.11-org/drivers/pci/quirks.c 2006-09-01
> 10:38:31.135747500 +0300
> +++ linux-2.6.17.11/drivers/pci/quirks.c 2006-09-01 10:42:28.870605000 +0300
> @@ -652,13 +652,7 @@
> pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
> }
> }
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0,
> quirk_via_irq);
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
> quirk_via_irq);
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2,
> quirk_via_irq);
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3,
> quirk_via_irq);
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
> quirk_via_irq);
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4,
> quirk_via_irq);
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
> quirk_via_irq);
> +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
>
> /*
> * VIA VT82C598 has its device ID settable and many BIOSes
>
>
>
> Signed-off-by: johnny.strom@osp.fi
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2006-09-01 11:49 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-01 8:15 Johnny Strom
2006-09-01 8:47 ` Andrew Morton
2006-09-01 10:48 ` Johnny Strom
2006-09-01 15:55 ` Chris Wedgwood
2006-09-04 12:04 ` Johnny Strom
2006-09-01 11:49 ` Sergio Monteiro Basto [this message]
2006-09-01 12:43 ` Johnny Strom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1157111352.3491.1.camel@localhost.localdomain \
--to=sergio@sergiomb.no-ip.org \
--cc=johnny.strom@osp.fi \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome