From: Andrew Morton <akpm@osdl.org>
To: Johnny Strom <johnny.strom@osp.fi>
Cc: linux-kernel@vger.kernel.org, Chris Wedgwood <cw@f00f.org>
Subject: Re: Patch to make VIA sata board bootable again.
Date: Fri, 1 Sep 2006 01:47:45 -0700 [thread overview]
Message-ID: <20060901014745.750e69d1.akpm@osdl.org> (raw)
In-Reply-To: <44F7EC15.8040800@osp.fi>
On Fri, 01 Sep 2006 11:15:17 +0300
Johnny Strom <johnny.strom@osp.fi> wrote:
>
>
> Hello
>
> The quirks.c update that went into 2.6.16.17 made an VIA machine here
> non bootable from an sata drive (via_sata), the error is:
>
> "ATA1 qc timout"
> "Failed to set xfermode".
argh.
Does 2.6.18-rc5 work?
> And later kernel panic becouse no sata disk was found.
> I tracked it down to the quirk update in 2.6.16.17. Below is a patch
> against 2.6.17.11 that reverses the uppdate and makse the system
> bootable again.
>
> Another option is to find out the PCI_DEVICE_ID_VIA for the motherboard
> in question but I could not get that info. Dose someone have an idea how
> to find that info? then I can provide an patch that adds the right
> PCI_DEVICE_ID_VIA for my motherboard.
>
>
>
> diff -ur linux-2.6.17.11-org/drivers/pci/quirks.c
> linux-2.6.17.11/drivers/pci/quirks.c
> --- linux-2.6.17.11-org/drivers/pci/quirks.c 2006-09-01
> 10:38:31.135747500 +0300
> +++ linux-2.6.17.11/drivers/pci/quirks.c 2006-09-01 10:42:28.870605000 +0300
> @@ -652,13 +652,7 @@
> pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
> }
> }
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0,
> quirk_via_irq);
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
> quirk_via_irq);
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2,
> quirk_via_irq);
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3,
> quirk_via_irq);
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
> quirk_via_irq);
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4,
> quirk_via_irq);
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
> quirk_via_irq);
> +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
>
That's wordwrapped.
next prev parent reply other threads:[~2006-09-01 8:47 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-01 8:15 Johnny Strom
2006-09-01 8:47 ` Andrew Morton [this message]
2006-09-01 10:48 ` Johnny Strom
2006-09-01 15:55 ` Chris Wedgwood
2006-09-04 12:04 ` Johnny Strom
2006-09-01 11:49 ` Sergio Monteiro Basto
2006-09-01 12:43 ` Johnny Strom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060901014745.750e69d1.akpm@osdl.org \
--to=akpm@osdl.org \
--cc=cw@f00f.org \
--cc=johnny.strom@osp.fi \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome