[PATCH 5/5] v4l: saa7134: enable ir-remote for 10moons TM300

[PATCH 5/5] v4l: saa7134: enable ir-remote for 10moons TM300

[Tony Wan]

Using Encore's key codes, we needn't add any additional key table.

Signed-off-by: Tony Wan <wankai@sjtu.org>
---
 drivers/media/video/saa7134/saa7134-cards.c |    1 +
 drivers/media/video/saa7134/saa7134-input.c |    6 ++++++
 2 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/drivers/media/video/saa7134/saa7134-cards.c
b/drivers/media/video/saa7134/saa7134-cards.c
index 44f2077..5813509 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -4368,6 +4368,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 	case SAA7134_BOARD_AVERMEDIA_A16AR:
 	case SAA7134_BOARD_ENCORE_ENLTV:
 	case SAA7134_BOARD_ENCORE_ENLTV_FM:
+	case SAA7134_BOARD_10MOONSTVMASTER3:
 		dev->has_remote = SAA7134_REMOTE_GPIO;
 		break;
 	case SAA7134_BOARD_FLYDVBS_LR300:
diff --git a/drivers/media/video/saa7134/saa7134-input.c
b/drivers/media/video/saa7134/saa7134-input.c
index c0de37e..817d4b6 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -333,6 +333,12 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		mask_keyup   = 0x040000;
 		polling      = 50; // ms
 		break;
+	case SAA7134_BOARD_10MOONSTVMASTER3:
+		ir_codes     = ir_codes_encore_enltv;
+		mask_keycode = 0x5f80000;
+		mask_keyup   = 0x8000000;
+		polling      = 50; //ms
+		break;
 	}
 	if (NULL == ir_codes) {
 		printk("%s: Oops: IR config error [card=%d]\n",