libertas ub8xxx - bcdDevice 30.06 - firmware issues?

libertas ub8xxx - bcdDevice 30.06 - firmware issues?

[Luis R. Rodriguez]

I have a USB libertas 1286:2001 with bcdDevice 30.06 (from lsusb -v).
I tried downloading the firmware from marvell:

https://www.marvell.com/drivers/driverDisplay.do?dId=160&pId=38

renaming and to usb8388.bin and putting it in firmware dir. Is this
the right firmware??

Upon load this is what I get:

17:58 < mcgrof> usb8xxx: URB in failure status: -71
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb8xxx: probe of 4-1:1.0 failed with error -12
17:58 < mcgrof> usbcore: registered new interface driver usb8xxx

I'm using the compatibility package from:

http://linuxwireless.org/en/users/Download

on 2.6.22. So this driver reflects what's on
wireless2.6.git#everything. I tried looking on the wiki but well can't
find much information. Can we please start adding some info about this
driver to:

http://linuxwireless.org/en/users/Drivers/libertas

  Luis

Re: libertas ub8xxx - bcdDevice 30.06 - firmware issues?

[Dan Williams]

On Fri, 2007-11-16 at 20:26 -0500, Luis R. Rodriguez wrote:
> I have a USB libertas 1286:2001 with bcdDevice 30.06 (from lsusb -v).
> I tried downloading the firmware from marvell:
> 
> https://www.marvell.com/drivers/driverDisplay.do?dId=160&pId=38
> 
> renaming and to usb8388.bin and putting it in firmware dir. Is this
> the right firmware??

Yikes; really old.  You might want to try:

http://dev.laptop.org/pub/firmware/libertas/

Dan

> Upon load this is what I get:
> 
> 17:58 < mcgrof> usb8xxx: URB in failure status: -71
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb8xxx: probe of 4-1:1.0 failed with error -12
> 17:58 < mcgrof> usbcore: registered new interface driver usb8xxx
> 
> I'm using the compatibility package from:
> 
> http://linuxwireless.org/en/users/Download
> 
> on 2.6.22. So this driver reflects what's on
> wireless2.6.git#everything. I tried looking on the wiki but well can't
> find much information. Can we please start adding some info about this
> driver to:
> 
> http://linuxwireless.org/en/users/Drivers/libertas
> 
>   Luis
> 
> _______________________________________________
> libertas-dev mailing list
> libertas-dev@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/libertas-dev