mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Bryan Wu <bryan.wu@analog.com>
To: a.zummo@towertech.it, rtc-linux@googlegroups.com
Cc: linux-kernel@vger.kernel.org,
	uclinux-dist-devel@blackfin.uclinux.org,
	Mike Frysinger <michael.frysinger@analog.com>,
	Bryan Wu <bryan.wu@analog.com>
Subject: [PATCH 7/7] Blackfin RTC driver: convert sync wait to use the irq write complete notice
Date: Fri, 23 Nov 2007 18:08:32 +0800	[thread overview]
Message-ID: <1195812512-25979-8-git-send-email-bryan.wu@analog.com> (raw)
In-Reply-To: <1195812512-25979-1-git-send-email-bryan.wu@analog.com>

From: Mike Frysinger <michael.frysinger@analog.com>

 - thus clearing out the need for spin locks
 - add a small optimization for reading of the rtc field

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
---
 drivers/rtc/rtc-bfin.c |  249 ++++++++++++++++++++++++++----------------------
 1 files changed, 136 insertions(+), 113 deletions(-)

diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index 69810a2..d90ba86 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -1,6 +1,6 @@
 /*
  * Blackfin On-Chip Real Time Clock Driver
- *  Supports BF53[123]/BF53[467]/BF54[2489]
+ *  Supports BF52[257]/BF53[123]/BF53[467]/BF54[24789]
  *
  * Copyright 2004-2007 Analog Devices Inc.
  *
@@ -32,16 +32,16 @@
  * writes to clear status registers complete immediately.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/bcd.h>
-#include <linux/rtc.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/rtc.h>
 #include <linux/seq_file.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
 
 #include <asm/blackfin.h>
 
@@ -50,7 +50,7 @@
 struct bfin_rtc {
 	struct rtc_device *rtc_dev;
 	struct rtc_time rtc_alarm;
-	spinlock_t lock;
+	u16 rtc_wrote_regs;
 };
 
 /* Bit values for the ISTAT / ICTL registers */
@@ -96,7 +96,10 @@ static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm)
 	rtc_time_to_tm(rtc_bfin_to_time(rtc_bfin), tm);
 }
 
-/* Wait for the previous write to a RTC register to complete.
+/**
+ *	bfin_rtc_sync_pending - make sure pending writes have complete
+ *
+ * Wait for the previous write to a RTC register to complete.
  * Unfortunately, we can't sleep here as that introduces a race condition when
  * turning on interrupt events.  Consider this:
  *  - process sets alarm
@@ -117,64 +120,102 @@ static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm)
  *    inc rate for all RTC registers from 1HZ to 32.768kHZ ...
  *  - use the write complete IRQ
  */
-static void rtc_bfin_sync_pending(void)
+/*
+static void bfin_rtc_sync_pending_polled(void)
 {
-	while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE)) {
+	while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE))
 		if (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING))
 			break;
-	}
 	bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE);
 }
+*/
+static DECLARE_COMPLETION(bfin_write_complete);
+static void bfin_rtc_sync_pending(struct device *dev)
+{
+	dev_dbg_stamp(dev);
+	while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
+		wait_for_completion_timeout(&bfin_write_complete, HZ * 5);
+	dev_dbg_stamp(dev);
+}
 
-static void rtc_bfin_reset(struct device *dev)
+/**
+ *	bfin_rtc_reset - set RTC to sane/known state
+ *
+ * Initialize the RTC.  Enable pre-scaler to scale RTC clock
+ * to 1Hz and clear interrupt/status registers.
+ */
+static void bfin_rtc_reset(struct device *dev)
 {
 	struct bfin_rtc *rtc = dev_get_drvdata(dev);
-	/* Initialize the RTC. Enable pre-scaler to scale RTC clock
-	 * to 1Hz and clear interrupt/status registers. */
-	spin_lock_irq(&rtc->lock);
-	rtc_bfin_sync_pending();
+	dev_dbg_stamp(dev);
+	bfin_rtc_sync_pending(dev);
 	bfin_write_RTC_PREN(0x1);
-	bfin_write_RTC_ICTL(0);
+	bfin_write_RTC_ICTL(RTC_ISTAT_WRITE_COMPLETE);
 	bfin_write_RTC_SWCNT(0);
 	bfin_write_RTC_ALARM(0);
 	bfin_write_RTC_ISTAT(0xFFFF);
-	spin_unlock_irq(&rtc->lock);
+	rtc->rtc_wrote_regs = 0;
 }
 
+/**
+ *	bfin_rtc_interrupt - handle interrupt from RTC
+ *
+ * Since we handle all RTC events here, we have to make sure the requested
+ * interrupt is enabled (in RTC_ICTL) as the event status register (RTC_ISTAT)
+ * always gets updated regardless of the interrupt being enabled.  So when one
+ * even we care about (e.g. stopwatch) goes off, we don't want to turn around
+ * and say that other events have happened as well (e.g. second).  We do not
+ * have to worry about pending writes to the RTC_ICTL register as interrupts
+ * only fire if they are enabled in the RTC_ICTL register.
+ */
 static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id)
 {
 	struct device *dev = dev_id;
 	struct bfin_rtc *rtc = dev_get_drvdata(dev);
 	unsigned long events = 0;
-	u16 rtc_istat;
+	bool write_complete = false;
+	u16 rtc_istat, rtc_ictl;
 
 	dev_dbg_stamp(dev);
 
-	spin_lock_irq(&rtc->lock);
-
 	rtc_istat = bfin_read_RTC_ISTAT();
+	rtc_ictl = bfin_read_RTC_ICTL();
 
-	if (rtc_istat & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) {
-		bfin_write_RTC_ISTAT(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY);
-		events |= RTC_AF | RTC_IRQF;
+	if (rtc_istat & RTC_ISTAT_WRITE_COMPLETE) {
+		bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE);
+		write_complete = true;
+		complete(&bfin_write_complete);
 	}
 
-	if (rtc_istat & RTC_ISTAT_STOPWATCH) {
-		bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH);
-		events |= RTC_PF | RTC_IRQF;
-		bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);
+	if (rtc_ictl & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) {
+		if (rtc_istat & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) {
+			bfin_write_RTC_ISTAT(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY);
+			events |= RTC_AF | RTC_IRQF;
+		}
 	}
 
-	if (rtc_istat & RTC_ISTAT_SEC) {
-		bfin_write_RTC_ISTAT(RTC_ISTAT_SEC);
-		events |= RTC_UF | RTC_IRQF;
+	if (rtc_ictl & RTC_ISTAT_STOPWATCH) {
+		if (rtc_istat & RTC_ISTAT_STOPWATCH) {
+			bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH);
+			events |= RTC_PF | RTC_IRQF;
+			bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);
+		}
 	}
 
-	rtc_update_irq(rtc->rtc_dev, 1, events);
+	if (rtc_ictl & RTC_ISTAT_SEC) {
+		if (rtc_istat & RTC_ISTAT_SEC) {
+			bfin_write_RTC_ISTAT(RTC_ISTAT_SEC);
+			events |= RTC_UF | RTC_IRQF;
+		}
+	}
 
-	spin_unlock_irq(&rtc->lock);
+	if (events)
+		rtc_update_irq(rtc->rtc_dev, 1, events);
 
-	return IRQ_HANDLED;
+	if (write_complete || events)
+		return IRQ_HANDLED;
+	else
+		return IRQ_NONE;
 }
 
 static int bfin_rtc_open(struct device *dev)
@@ -183,13 +224,9 @@ static int bfin_rtc_open(struct device *dev)
 
 	dev_dbg_stamp(dev);
 
-	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_DISABLED, "rtc-bfin", dev);
-	if (unlikely(ret)) {
-		dev_err(dev, "request RTC IRQ failed with %d\n", ret);
-		return ret;
-	}
-
-	rtc_bfin_reset(dev);
+	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, to_platform_device(dev)->name, dev);
+	if (!ret)
+		bfin_rtc_reset(dev);
 
 	return ret;
 }
@@ -197,93 +234,70 @@ static int bfin_rtc_open(struct device *dev)
 static void bfin_rtc_release(struct device *dev)
 {
 	dev_dbg_stamp(dev);
-	rtc_bfin_reset(dev);
+	bfin_rtc_reset(dev);
 	free_irq(IRQ_RTC, dev);
 }
 
+static void bfin_rtc_int_set(struct bfin_rtc *rtc, u16 rtc_int)
+{
+	bfin_write_RTC_ISTAT(rtc_int);
+	bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | rtc_int);
+}
+static void bfin_rtc_int_clear(struct bfin_rtc *rtc, u16 rtc_int)
+{
+	bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & rtc_int);
+}
+static void bfin_rtc_int_set_alarm(struct bfin_rtc *rtc)
+{
+	/* Blackfin has different bits for whether the alarm is
+	 * more than 24 hours away.
+	 */
+	bfin_rtc_int_set(rtc, (rtc->rtc_alarm.tm_yday == -1 ? RTC_ISTAT_ALARM : RTC_ISTAT_ALARM_DAY));
+}
 static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
 	struct bfin_rtc *rtc = dev_get_drvdata(dev);
+	int ret = 0;
 
 	dev_dbg_stamp(dev);
 
+	bfin_rtc_sync_pending(dev);
+
 	switch (cmd) {
 	case RTC_PIE_ON:
 		dev_dbg_stamp(dev);
-		spin_lock_irq(&rtc->lock);
-		rtc_bfin_sync_pending();
-		bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH);
+		bfin_rtc_int_set(rtc, RTC_ISTAT_STOPWATCH);
 		bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);
-		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_STOPWATCH);
-		spin_unlock_irq(&rtc->lock);
-		return 0;
+		break;
 	case RTC_PIE_OFF:
 		dev_dbg_stamp(dev);
-		spin_lock_irq(&rtc->lock);
-		rtc_bfin_sync_pending();
-		bfin_write_RTC_SWCNT(0);
-		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_STOPWATCH);
-		spin_unlock_irq(&rtc->lock);
-		return 0;
+		bfin_rtc_int_clear(rtc, ~RTC_ISTAT_STOPWATCH);
+		break;
 
 	case RTC_UIE_ON:
 		dev_dbg_stamp(dev);
-		spin_lock_irq(&rtc->lock);
-		rtc_bfin_sync_pending();
-		bfin_write_RTC_ISTAT(RTC_ISTAT_SEC);
-		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_SEC);
-		spin_unlock_irq(&rtc->lock);
-		return 0;
+		bfin_rtc_int_set(rtc, RTC_ISTAT_SEC);
+		break;
 	case RTC_UIE_OFF:
 		dev_dbg_stamp(dev);
-		spin_lock_irq(&rtc->lock);
-		rtc_bfin_sync_pending();
-		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_SEC);
-		spin_unlock_irq(&rtc->lock);
-		return 0;
-
-	case RTC_AIE_ON: {
-		unsigned long rtc_alarm;
-		u16 which_alarm;
-		int ret = 0;
+		bfin_rtc_int_clear(rtc, ~RTC_ISTAT_SEC);
+		break;
 
+	case RTC_AIE_ON:
 		dev_dbg_stamp(dev);
-
-		spin_lock_irq(&rtc->lock);
-
-		rtc_bfin_sync_pending();
-		if (rtc->rtc_alarm.tm_yday == -1) {
-			struct rtc_time now;
-			rtc_bfin_to_tm(bfin_read_RTC_STAT(), &now);
-			now.tm_sec = rtc->rtc_alarm.tm_sec;
-			now.tm_min = rtc->rtc_alarm.tm_min;
-			now.tm_hour = rtc->rtc_alarm.tm_hour;
-			ret = rtc_tm_to_time(&now, &rtc_alarm);
-			which_alarm = RTC_ISTAT_ALARM;
-		} else {
-			ret = rtc_tm_to_time(&rtc->rtc_alarm, &rtc_alarm);
-			which_alarm = RTC_ISTAT_ALARM_DAY;
-		}
-		if (ret == 0) {
-			bfin_write_RTC_ISTAT(which_alarm);
-			bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm));
-			bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | which_alarm);
-		}
-
-		spin_unlock_irq(&rtc->lock);
-
-		return ret;
-	}
+		bfin_rtc_int_set_alarm(rtc);
+		break;
 	case RTC_AIE_OFF:
 		dev_dbg_stamp(dev);
-		spin_lock_irq(&rtc->lock);
-		rtc_bfin_sync_pending();
-		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
-		spin_unlock_irq(&rtc->lock);
-		return 0;
+		bfin_rtc_int_clear(rtc, ~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
+		break;
+
+	default:
+		dev_dbg_stamp(dev);
+		ret = -ENOIOCTLCMD;
 	}
 
-	return -ENOIOCTLCMD;
+	return ret;
 }
 
 static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm)
@@ -292,10 +306,10 @@ static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 	dev_dbg_stamp(dev);
 
-	spin_lock_irq(&rtc->lock);
-	rtc_bfin_sync_pending();
+	if (rtc->rtc_wrote_regs & 0x1)
+		bfin_rtc_sync_pending(dev);
+
 	rtc_bfin_to_tm(bfin_read_RTC_STAT(), tm);
-	spin_unlock_irq(&rtc->lock);
 
 	return 0;
 }
@@ -308,16 +322,14 @@ static int bfin_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 	dev_dbg_stamp(dev);
 
-	spin_lock_irq(&rtc->lock);
-
 	ret = rtc_tm_to_time(tm, &now);
 	if (ret == 0) {
-		rtc_bfin_sync_pending();
+		if (rtc->rtc_wrote_regs & 0x1)
+			bfin_rtc_sync_pending(dev);
 		bfin_write_RTC_STAT(rtc_time_to_bfin(now));
+		rtc->rtc_wrote_regs = 0x1;
 	}
 
-	spin_unlock_irq(&rtc->lock);
-
 	return ret;
 }
 
@@ -326,6 +338,7 @@ static int bfin_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	struct bfin_rtc *rtc = dev_get_drvdata(dev);
 	dev_dbg_stamp(dev);
 	alrm->time = rtc->rtc_alarm;
+	bfin_rtc_sync_pending(dev);
 	alrm->enabled = !!(bfin_read_RTC_ICTL() & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
 	return 0;
 }
@@ -333,8 +346,20 @@ static int bfin_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 static int bfin_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	struct bfin_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long rtc_alarm;
+
 	dev_dbg_stamp(dev);
+
+	if (rtc_tm_to_time(&alrm->time, &rtc_alarm))
+		return -EINVAL;
+
 	rtc->rtc_alarm = alrm->time;
+
+	bfin_rtc_sync_pending(dev);
+	bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm));
+	if (alrm->enabled)
+		bfin_rtc_int_set_alarm(rtc);
+
 	return 0;
 }
 
@@ -393,8 +418,6 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 	if (unlikely(!rtc))
 		return -ENOMEM;
 
-	spin_lock_init(&rtc->lock);
-
 	rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE);
 	if (unlikely(IS_ERR(rtc))) {
 		ret = PTR_ERR(rtc->rtc_dev);
-- 
1.5.3.4

      parent reply	other threads:[~2007-11-23 10:10 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-11-23 10:08 [PATCH 0/7] Blackfin On-Chip RTC driver updates Bryan Wu
2007-11-23 10:08 ` [PATCH 1/7] Blackfin RTC driver: the frequency function is in units of Hz, not units of seconds, so lock our driver down to 1 Hz Bryan Wu
2007-12-04 16:26   ` Alessandro Zummo
2007-12-04 16:29     ` [rtc-linux] " Mike Frysinger
2007-12-04 16:41       ` Alessandro Zummo
2007-12-04 16:47         ` Mike Frysinger
2007-12-04 16:49           ` Alessandro Zummo
2007-12-04 16:56             ` Mike Frysinger
2007-12-04 16:59               ` Alessandro Zummo
2007-12-04 17:15         ` Mike Frysinger
2007-11-23 10:08 ` [PATCH 2/7] Blackfin RTC driver: we pass in a (struct device*) to the irq handler, not a (struct platform_device*), so fix the irq handler Bryan Wu
2007-11-23 10:08 ` [PATCH 3/7] Blackfin RTC driver: cleanup proc handler (we dont need RTC reg dump now that we have MMR filesystem in sysfs) Bryan Wu
2007-11-23 10:08 ` [PATCH 4/7] Blackfin RTC driver: use dev_dbg() rather than pr_stamp() Bryan Wu
2007-11-23 10:08 ` [PATCH 5/7] Blackfin RTC driver: read_alarm() checks the enabled field, not the pending field Bryan Wu
2007-11-23 10:08 ` [PATCH 6/7] Blackfin RTC driver: shave off another memcpy() by using assignment Bryan Wu
2007-11-23 10:08 ` Bryan Wu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1195812512-25979-8-git-send-email-bryan.wu@analog.com \
    --to=bryan.wu@analog.com \
    --cc=a.zummo@towertech.it \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.frysinger@analog.com \
    --cc=rtc-linux@googlegroups.com \
    --cc=uclinux-dist-devel@blackfin.uclinux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome