From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Jeff Garzik <jgarzik@pobox.com>,
linux-ide@vger.kernel.org
Subject: [PATCH] drivers/ata/: Spelling fixes
Date: Mon, 17 Dec 2007 11:30:27 -0800 [thread overview]
Message-ID: <1197919875-5288-28-git-send-email-joe@perches.com> (raw)
Message-ID: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918890.git.joe@perches.com> (raw)
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/ata/ata_piix.c | 2 +-
drivers/ata/libata-core.c | 4 ++--
drivers/ata/pata_at32.c | 2 +-
drivers/ata/pata_efar.c | 2 +-
drivers/ata/pata_it8213.c | 2 +-
drivers/ata/pata_sis.c | 4 ++--
6 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index bb62a58..ee51853 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -769,7 +769,7 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
if (is_slave) {
/* clear TIME1|IE1|PPE1|DTE1 */
master_data &= 0xff0f;
- /* Enable SITRE (seperate slave timing register) */
+ /* Enable SITRE (separate slave timing register) */
master_data |= 0x4000;
/* enable PPE1, IE1 and TIME1 as needed */
master_data |= (control << 4);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e4dea86..debbfc3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3065,7 +3065,7 @@ static int ata_dev_set_mode(struct ata_device *dev)
/**
* ata_do_set_mode - Program timings and issue SET FEATURES - XFER
* @link: link on which timings will be programmed
- * @r_failed_dev: out paramter for failed device
+ * @r_failed_dev: out parameter for failed device
*
* Standard implementation of the function used to tune and set
* ATA device disk transfer mode (PIO3, UDMA6, etc.). If
@@ -3173,7 +3173,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
/**
* ata_set_mode - Program timings and issue SET FEATURES - XFER
* @link: link on which timings will be programmed
- * @r_failed_dev: out paramter for failed device
+ * @r_failed_dev: out parameter for failed device
*
* Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
* ata_set_mode() fails, pointer to the failing device is
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index 67e574d..db057b1 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -324,7 +324,7 @@ static int __init pata_at32_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
- /* Setup struct containing private infomation */
+ /* Setup struct containing private information */
info = kzalloc(sizeof(struct at32_ide_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 043dcd3..dc33220 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -135,7 +135,7 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
idetm_data &= 0xCC0F;
idetm_data |= (control << 4);
- /* Slave timing in seperate register */
+ /* Slave timing in separate register */
pci_read_config_byte(dev, 0x44, &slave_data);
slave_data &= 0x0F << shift;
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift;
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 1eda821..e0c2cc2 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -128,7 +128,7 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
idetm_data &= 0xCC0F;
idetm_data |= (control << 4);
- /* Slave timing in seperate register */
+ /* Slave timing in separate register */
pci_read_config_byte(dev, 0x44, &slave_data);
slave_data &= 0xF0;
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4;
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 87546d9..dc7e915 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -345,7 +345,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
if (adev->dma_mode < XFER_UDMA_0) {
/* bits 3-0 hold recovery timing bits 8-10 active timing and
- the higer bits are dependant on the device */
+ the higher bits are dependant on the device */
timing &= ~0x870F;
timing |= mwdma_bits[speed];
} else {
@@ -385,7 +385,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
if (adev->dma_mode < XFER_UDMA_0) {
/* bits 3-0 hold recovery timing bits 8-10 active timing and
- the higer bits are dependant on the device, bit 15 udma */
+ the higher bits are dependant on the device, bit 15 udma */
timing &= ~0x870F;
timing |= mwdma_bits[speed];
} else {
--
1.5.3.7.949.g2221a6
next prev reply other threads:[~2007-12-17 19:44 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918890.git.joe@perches.com>
2007-12-17 19:30 ` [PATCH] include/asm-mips/: " Joe Perches
2007-12-17 19:53 ` Sergei Shtylyov
2007-12-17 20:02 ` Joe Perches
2007-12-17 19:30 ` [PATCH] arch/parisc/: " Joe Perches
2007-12-17 19:30 ` [PATCH] include/asm-parisc/: " Joe Perches
2007-12-17 19:30 ` [PATCH] arch/powerpc/: " Joe Perches
2007-12-17 19:36 ` Josh Boyer
2007-12-17 19:30 ` [PATCH] include/asm-powerpc/: " Joe Perches
2007-12-17 19:30 ` [PATCH] arch/ppc/: " Joe Perches
2007-12-17 20:42 ` Vitaly Bordug
2007-12-17 20:52 ` Joe Perches
2007-12-17 19:30 ` [PATCH] include/asm-ppc/: " Joe Perches
2007-12-17 19:30 ` [PATCH] arch/s390/: " Joe Perches
2007-12-17 19:30 ` [PATCH] include/asm-s390/: " Joe Perches
2007-12-17 19:30 ` [PATCH] arch/sh/: " Joe Perches
2007-12-17 19:30 ` [PATCH] include/asm-sh/: " Joe Perches
2007-12-17 19:30 ` [PATCH] arch/sh64/: " Joe Perches
2007-12-17 19:30 ` [PATCH] arch/sparc/: " Joe Perches
2007-12-20 21:55 ` David Miller
2007-12-17 19:30 ` [PATCH] arch/sparc64/: " Joe Perches
2007-12-20 21:55 ` David Miller
2007-12-17 19:30 ` [PATCH] arch/um: " Joe Perches
2007-12-17 19:30 ` [PATCH] arch/x86/: " Joe Perches
2007-12-17 19:30 ` [PATCH] drivers/acpi/: " Joe Perches
2007-12-17 19:30 ` [PATCH] include/acpi/: " Joe Perches
2007-12-17 19:30 ` Joe Perches [this message]
2007-12-17 19:30 ` [PATCH] drivers/atm/: " Joe Perches
2007-12-20 22:05 ` David Miller
2007-12-17 19:30 ` [PATCH] drivers/block/: " Joe Perches
2007-12-17 19:30 ` [PATCH] drivers/bluetooth/: " Joe Perches
2007-12-17 19:30 ` [PATCH] drivers/char/: " Joe Perches
2007-12-17 23:11 ` [PATCH] arch/sh/: " Paul Mundt
2007-12-18 7:07 ` [PATCH] include/asm-parisc/: " Grant Grundler
2007-12-18 10:04 ` [PATCH] arch/s390/: " Martin Schwidefsky
2007-12-18 13:01 ` [PATCH] arch/x86/: " Ingo Molnar
2008-01-07 20:07 ` [PATCH] drivers/block/: " Miller, Mike (OS Dev)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1197919875-5288-28-git-send-email-joe@perches.com \
--to=joe@perches.com \
--cc=akpm@linux-foundation.org \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®