From: Borislav Petkov <bbpetkov@yahoo.de>
To: Bartlomiej@gollum.tnic, Zolnierkiewicz@gollum.tnic, <bzolnier@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
Borislav Petkov <bbpetkov@yahoo.de>
Subject: [PATCH 12/21] ide-floppy: factor out ioctl handlers from idefloppy_ioctl()
Date: Fri, 11 Jan 2008 12:58:10 +0100 [thread overview]
Message-ID: <1200052699-28420-13-git-send-email-bbpetkov@yahoo.de> (raw)
In-Reply-To: <1200052699-28420-12-git-send-email-bbpetkov@yahoo.de>
By passing idefloppy_floppy_t *floppy to the factored out functions, we get
rid of (almost) all local vars so stack usage should be at minimum here. Also,
we merge idefloppy_begin_format() into idefloppy_format_start() since it is its
only user.
Also,
- remove unneeded scsi ioctl chunk
- rename idefloppy_format_start to idefloppy_format_unit
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
---
drivers/ide/ide-floppy.c | 169 +++++++++++++++++++++------------------------
1 files changed, 79 insertions(+), 90 deletions(-)
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 5d612e7..a33d651 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -1244,44 +1244,6 @@ static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
}
/*
- * Send ATAPI_FORMAT_UNIT to the drive.
- *
- * Userland gives us the following structure:
- *
- * struct idefloppy_format_command {
- * int nblocks;
- * int blocksize;
- * int flags;
- * } ;
- *
- * flags is a bitmask, currently, the only defined flag is:
- *
- * 0x01 - verify media after format.
- */
-
-static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg)
-{
- int blocks;
- int length;
- int flags;
- idefloppy_pc_t pc;
-
- if (get_user(blocks, arg) ||
- get_user(length, arg+1) ||
- get_user(flags, arg+2)) {
- return (-EFAULT);
- }
-
- (void) idefloppy_get_sfrp_bit(drive);
- idefloppy_create_format_unit_cmd(&pc, blocks, length, flags);
- if (idefloppy_queue_pc_tail(drive, &pc)) {
- return (-EIO);
- }
-
- return (0);
-}
-
-/*
* Get ATAPI_FORMAT_UNIT progress indication.
*
* Userland gives a pointer to an int. The int is set to a progress
@@ -1623,6 +1585,82 @@ static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return 0;
}
+static int idefloppy_lockdoor(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc,
+ unsigned long arg, unsigned int cmd)
+{
+ if (floppy->openers > 1)
+ return -EBUSY;
+
+ /* The IOMEGA Clik! Drive doesn't support this command -
+ * no room for an eject mechanism */
+ if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
+ int prevent = (arg) ? 1 : 0;
+
+ if (cmd == CDROMEJECT)
+ prevent = 0;
+
+ idefloppy_create_prevent_cmd(pc, prevent);
+ (void) idefloppy_queue_pc_tail(floppy->drive, pc);
+ }
+
+ if (cmd == CDROMEJECT) {
+ idefloppy_create_start_stop_cmd(pc, 2);
+ (void) idefloppy_queue_pc_tail(floppy->drive, pc);
+ }
+
+ return 0;
+}
+
+static int idefloppy_format_unit(idefloppy_floppy_t *floppy, unsigned long arg)
+{
+ int blocks, length, flags, err = 0;
+ int __user *argp = (int __user *)arg;
+ idefloppy_pc_t pc;
+
+ if (floppy->openers > 1) {
+ /* Don't format if someone is using the disk */
+ clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+ return -EBUSY;
+ }
+
+ set_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+
+ /*
+ * Send ATAPI_FORMAT_UNIT to the drive.
+ *
+ * Userland gives us the following structure:
+ *
+ * struct idefloppy_format_command {
+ * int nblocks;
+ * int blocksize;
+ * int flags;
+ * } ;
+ *
+ * flags is a bitmask, currently, the only defined flag is:
+ *
+ * 0x01 - verify media after format.
+ */
+ if (get_user(blocks, argp) ||
+ get_user(length, argp+1) ||
+ get_user(flags, argp+2)) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ (void) idefloppy_get_sfrp_bit(floppy->drive);
+ idefloppy_create_format_unit_cmd(&pc, blocks, length, flags);
+
+ if (idefloppy_queue_pc_tail(floppy->drive, &pc)) {
+ err = -EIO;
+ goto out;
+ }
+
+out:
+ if (err)
+ clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+ return err;
+}
+
static int idefloppy_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
@@ -1630,75 +1668,26 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file,
struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
ide_drive_t *drive = floppy->drive;
void __user *argp = (void __user *)arg;
- int err;
- int prevent = (arg) ? 1 : 0;
idefloppy_pc_t pc;
switch (cmd) {
case CDROMEJECT:
- prevent = 0;
/* fall through */
case CDROM_LOCKDOOR:
- if (floppy->openers > 1)
- return -EBUSY;
-
- /* The IOMEGA Clik! Drive doesn't support this command - no room
- * for an eject mechanism */
- if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
- idefloppy_create_prevent_cmd(&pc, prevent);
- (void) idefloppy_queue_pc_tail(drive, &pc);
- }
- if (cmd == CDROMEJECT) {
- idefloppy_create_start_stop_cmd(&pc, 2);
- (void) idefloppy_queue_pc_tail(drive, &pc);
- }
- return 0;
+ return idefloppy_lockdoor(floppy, &pc, arg, cmd);
case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
return 0;
case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
return idefloppy_get_format_capacities(drive, argp);
case IDEFLOPPY_IOCTL_FORMAT_START:
-
if (!(file->f_mode & 2))
return -EPERM;
-
- if (floppy->openers > 1) {
- /* Don't format if someone is using the disk */
-
- clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS,
- &floppy->flags);
- return -EBUSY;
- }
-
- set_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
-
- err = idefloppy_begin_format(drive, argp);
- if (err)
- clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
- return err;
- /*
- * Note, the bit will be cleared when the device is closed. This
- * is the cleanest way to handle the situation where the drive
- * does not support format progress reporting.
- */
+ return idefloppy_format_unit(floppy, arg);
case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
return idefloppy_get_format_progress(drive, argp);
}
- /*
- * skip SCSI_IOCTL_SEND_COMMAND (deprecated)
- * and CDROM_SEND_PACKET (legacy) ioctls
- */
- if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
- err = scsi_cmd_ioctl(file, bdev->bd_disk->queue,
- bdev->bd_disk, cmd, argp);
- else
- err = -ENOTTY;
-
- if (err == -ENOTTY)
- err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
-
- return err;
+ return generic_ide_ioctl(drive, file, bdev, cmd, arg);
}
static int idefloppy_media_changed(struct gendisk *disk)
--
1.5.3.7
next prev parent reply other threads:[~2008-01-11 12:09 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-11 11:57 [PATCH 00/21] ide-floppy redux v2 Borislav Petkov
2008-01-11 11:57 ` [PATCH 01/21] ide-floppy: convert to generic packet commands Borislav Petkov
2008-01-11 11:58 ` [PATCH 02/21] ide-floppy: replace ntoh{s,l} and hton{s,l} calls with the generic byteorder Borislav Petkov
2008-01-11 11:58 ` [PATCH 03/21] ide-floppy: remove unnecessary ->handler != NULL check Borislav Petkov
2008-01-11 11:58 ` [PATCH 04/21] ide-floppy: cleanup and unify debugging macro calls Borislav Petkov
2008-01-11 11:58 ` [PATCH 05/21] ide-floppy: remove struct idefloppy_capabilities_page Borislav Petkov
2008-01-11 11:58 ` [PATCH 06/21] ide-floppy: remove struct idefloppy_flexible_disk_page Borislav Petkov
2008-01-11 11:58 ` [PATCH 07/21] ide-floppy: remove struct idefloppy_capacity_descriptor Borislav Petkov
2008-01-11 11:58 ` [PATCH 08/21] ide-floppy: remove struct idefloppy_inquiry_result Borislav Petkov
2008-01-11 11:58 ` [PATCH 09/21] ide-floppy: remove struct idefloppy_request_sense_result Borislav Petkov
2008-01-11 11:58 ` [PATCH 10/21] ide-floppy: remove struct idefloppy_mode_parameter_header Borislav Petkov
2008-01-11 11:58 ` [PATCH 11/21] ide-floppy: fix comments formatting Borislav Petkov
2008-01-11 11:58 ` Borislav Petkov [this message]
[not found] ` <1200052699-28420-14-git-send-email-bbpetkov@yahoo.de>
2008-01-11 11:58 ` [PATCH 14/21] ide-floppy: mv idefloppy_{should_,}report_error Borislav Petkov
2008-01-11 11:58 ` [PATCH 15/21] ide-floppy: disambiguate function names Borislav Petkov
[not found] ` <1200052699-28420-17-git-send-email-bbpetkov@yahoo.de>
[not found] ` <1200052699-28420-18-git-send-email-bbpetkov@yahoo.de>
2008-01-11 11:58 ` [PATCH 18/21] ide-floppy: fix error handling in idefloppy_probe() Borislav Petkov
2008-01-11 11:58 ` [PATCH 19/21] ide-floppy: fix most of the remaining checkpatch.pl issues Borislav Petkov
2008-01-11 11:58 ` [PATCH 20/21] ide-floppy: merge idefloppy_{input,output}_buffers Borislav Petkov
2008-01-11 11:58 ` [PATCH 21/21] ide-floppy: remove atomic test_*bit macros Borislav Petkov
2008-01-12 20:19 ` Bartlomiej Zolnierkiewicz
2008-01-12 20:19 ` [PATCH 20/21] ide-floppy: merge idefloppy_{input,output}_buffers Bartlomiej Zolnierkiewicz
2008-01-12 20:18 ` [PATCH 19/21] ide-floppy: fix most of the remaining checkpatch.pl issues Bartlomiej Zolnierkiewicz
2008-01-12 20:18 ` [PATCH 18/21] ide-floppy: fix error handling in idefloppy_probe() Bartlomiej Zolnierkiewicz
2008-01-12 21:12 ` Borislav Petkov
2008-01-12 20:16 ` [PATCH 14/21] ide-floppy: mv idefloppy_{should_,}report_error Bartlomiej Zolnierkiewicz
2008-01-12 20:16 ` [PATCH 12/21] ide-floppy: factor out ioctl handlers from idefloppy_ioctl() Bartlomiej Zolnierkiewicz
2008-01-12 20:16 ` [PATCH 11/21] ide-floppy: fix comments formatting Bartlomiej Zolnierkiewicz
2008-01-12 0:59 ` [PATCH 07/21] ide-floppy: remove struct idefloppy_capacity_descriptor Bartlomiej Zolnierkiewicz
2008-01-12 0:58 ` [PATCH 06/21] ide-floppy: remove struct idefloppy_flexible_disk_page Bartlomiej Zolnierkiewicz
2008-01-12 20:15 ` Bartlomiej Zolnierkiewicz
2008-01-12 20:38 ` Borislav Petkov
2008-01-12 21:32 ` Bartlomiej Zolnierkiewicz
2008-01-11 23:56 ` [PATCH 04/21] ide-floppy: cleanup and unify debugging macro calls Bartlomiej Zolnierkiewicz
2008-01-12 13:46 ` [PATCH 00/21] ide-floppy redux v2 Bartlomiej Zolnierkiewicz
2008-01-12 20:14 ` Bartlomiej Zolnierkiewicz
2008-01-12 20:51 ` Borislav Petkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1200052699-28420-13-git-send-email-bbpetkov@yahoo.de \
--to=bbpetkov@yahoo.de \
--cc=Bartlomiej@gollum.tnic \
--cc=Zolnierkiewicz@gollum.tnic \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®