From: David Woodhouse <dwmw2@infradead.org>
To: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, sam@ravnborg.org,
Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>
Subject: Re: [PATCHv2 28/28] firmware: convert korg1212 driver to use firmware loader exclusively
Date: Wed, 28 May 2008 00:24:02 +0300 [thread overview]
Message-ID: <1211923442.2462.69.camel@shinybook.infradead.org> (raw)
In-Reply-To: <86802c440805271133h1f93b92fkef99f8effeaaf223@mail.gmail.com>
On Tue, 2008-05-27 at 11:33 -0700, Yinghai Lu wrote:
> any chance to make it get into 2.6.26?
>
> before this i need to keep two copies klibc with fw (qla24xxx) in
> initramfs. one for 32 bit and one for 64 bit.
Well, it's supposedly too late, but it's dead simple and shouldn't have
much chance of breaking anything, so I suppose as long as we don't
include the korg1212 patch and the rest of the similar patches which
we're still working on, that's not such an insane request.
As long as the one or two drivers I mentioned get tested, that is.
--
dwmw2
next prev parent reply other threads:[~2008-05-27 21:24 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-25 10:23 [PATCHv2 00/28] Allow built-in firmware to be accessed by request_firmware() David Woodhouse
2008-05-25 10:23 ` [PATCHv2 01/28] libertas: treat firmware data as const David Woodhouse
2008-05-25 13:06 ` Alan Cox
2008-05-25 10:23 ` [PATCHv2 02/28] bluetooth: " David Woodhouse
2008-05-25 13:07 ` Alan Cox
2008-05-25 10:23 ` [PATCHv2 03/28] cyclades: " David Woodhouse
2008-05-25 13:07 ` Alan Cox
2008-05-25 10:23 ` [PATCHv2 04/28] cx25840: " David Woodhouse
2008-05-25 10:51 ` Hans Verkuil
2008-05-25 14:36 ` David Woodhouse
2008-05-25 14:56 ` David Woodhouse
2008-05-25 15:04 ` Hans Verkuil
2008-05-25 15:37 ` Mike Isely
2008-05-25 15:20 ` Mike Isely
2008-05-25 16:16 ` Tyler Trafford
2008-05-25 10:23 ` [PATCHv2 05/28] myri10ge: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 06/28] vx222: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 07/28] riptide: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 08/28] pcxhr: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 09/28] vx: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 10/28] ueagle-atm: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 11/28] cxacru: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 12/28] aic94xx: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 13/28] zd1201: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 14/28] rt2x00: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 15/28] p54: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 16/28] atmel: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 17/28] irda-usb: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 18/28] cxgb3: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 19/28] bt8xx: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 20/28] ttusb-dec: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 21/28] dvb frontends: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 22/28] cxusb: " David Woodhouse
2008-05-25 14:14 ` Michael Krufky
2008-05-25 14:27 ` David Woodhouse
2008-05-25 15:02 ` David Woodhouse
2008-05-25 10:23 ` [PATCHv2 23/28] gp8psk: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 24/28] tuners: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 25/28] firmware: make fw->data const David Woodhouse
2008-05-25 10:23 ` [PATCHv2 26/28] firmware: allow firmware files to be built into kernel image David Woodhouse
2008-05-30 5:08 ` Rusty Russell
2008-05-31 8:39 ` David Woodhouse
2008-05-25 10:23 ` [PATCHv2 27/28] firmware: Add CONFIG_BUILTIN_FIRMWARE option David Woodhouse
2008-05-25 17:00 ` [PATCHv3 " David Woodhouse
2008-05-26 8:58 ` David Woodhouse
2008-05-28 11:46 ` [PATCHv4 " David Woodhouse
2008-05-29 8:29 ` [PATCH 29/28] firmware: Add 'firmware_install' make target David Woodhouse
2008-05-25 10:23 ` [PATCHv2 28/28] firmware: convert korg1212 driver to use firmware loader exclusively David Woodhouse
2008-05-25 13:11 ` Alan Cox
2008-05-27 18:33 ` Yinghai Lu
2008-05-27 21:24 ` David Woodhouse [this message]
2008-05-29 9:09 ` [PATCHv2 #ERROR!/28] maestro3: treat firmware data as const David Woodhouse
2008-05-29 10:49 ` [PATCHv2 30/28] firmware: convert maestro3 driver to use firmware loader exclusively David Woodhouse
2008-05-29 12:21 ` [PATCH N/28] ymfpci: treat firmware data as const David Woodhouse
2008-05-29 12:23 ` [PATCH N/28] firmware: convert ymfpci driver to use firmware loader exclusively David Woodhouse
2008-05-29 13:47 ` [PATCH] smctr: use request_firmware() David Woodhouse
2008-05-29 19:30 ` maximilian attems
2008-05-29 21:02 ` David Woodhouse
2008-05-29 14:20 ` [PATCH] kaweth: " David Woodhouse
2008-05-30 13:55 ` Oliver Neukum
2008-05-30 15:16 ` David Woodhouse
2008-05-30 15:26 ` Marcel Holtmann
2008-05-30 15:48 ` Alan Cox
2008-05-30 21:02 ` Oliver Neukum
2008-05-31 0:00 ` Alexandre Oliva
2008-05-31 6:51 ` Marcel Holtmann
2008-05-31 12:35 ` Alan Cox
2008-05-29 17:49 ` [PATCH] ttusb-budget: " David Woodhouse
2008-06-13 19:23 ` Mauro Carvalho Chehab
2008-05-30 11:45 ` [PATCH] keyspan: " David Woodhouse
2008-05-30 13:54 ` Hugh Blemings
2008-05-30 12:19 ` [PATCH] keyspan_pda: " David Woodhouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1211923442.2462.69.camel@shinybook.infradead.org \
--to=dwmw2@infradead.org \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=sam@ravnborg.org \
--cc=tglx@linutronix.de \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®