mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Woodhouse <dwmw2@infradead.org>
To: linux-kernel@vger.kernel.org
Cc: sam@ravnborg.org, alan@lxorguk.ukuu.org.uk,
	akpm@linux-foundation.org, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.de>
Subject: [PATCH N/28] ymfpci: treat firmware data as const
Date: Thu, 29 May 2008 15:21:12 +0300	[thread overview]
Message-ID: <1212063672.26088.16.camel@shinybook.infradead.org> (raw)
In-Reply-To: <1211708969@pmac.infradead.org>

Standardise both in-kernel and loaded firmware to be stored as
little-endian instead of host-endian.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
As with the maestro3 version, take the least intrusive solution since
it's not going to be there for long.

 sound/pci/ymfpci/ymfpci_main.c |   59 +++++++++++++++++++++++-----------------
 1 files changed, 34 insertions(+), 25 deletions(-)

diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
index 29b3056..6298b29 100644
--- a/sound/pci/ymfpci/ymfpci_main.c
+++ b/sound/pci/ymfpci/ymfpci_main.c
@@ -26,6 +26,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
+#include <linux/mutex.h>
 
 #include <sound/core.h>
 #include <sound/control.h>
@@ -2009,11 +2010,34 @@ static struct firmware snd_ymfpci_controller_1e_microcode = {
 	.size = YDSXG_CTRLLENGTH,
 	.data = (u8 *)CntrlInst1E,
 };
+
+#ifdef __BIG_ENDIAN
+static int microcode_swapped;
+static DEFINE_MUTEX(microcode_swap);
+
+static void snd_ymfpci_convert_to_le(const struct firmware *fw)
+{
+	int i;
+	u32 *data = (u32 *)fw->data;
+
+	for (i = 0; i < fw->size / 4; ++i)
+		cpu_to_le32s(&data[i]);
+}
 #endif
 
-#ifdef CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL
 static int snd_ymfpci_request_firmware(struct snd_ymfpci *chip)
 {
+#ifdef __BIG_ENDIAN
+	mutex_lock(&microcode_swap);
+	if (!microcode_swapped) {
+		snd_ymfpci_convert_to_le(&snd_ymfpci_dsp_microcode);
+		snd_ymfpci_convert_to_le(&snd_ymfpci_controller_1e_microcode);
+		snd_ymfpci_convert_to_le(&snd_ymfpci_controller_microcode);
+		microcode_swapped = 1;
+	}
+	mutex_unlock(&microcode_swap);
+#endif
+
 	chip->dsp_microcode = &snd_ymfpci_dsp_microcode;
 	if (chip->device_id == PCI_DEVICE_ID_YAMAHA_724F ||
 	    chip->device_id == PCI_DEVICE_ID_YAMAHA_740C ||
@@ -2029,19 +2053,6 @@ static int snd_ymfpci_request_firmware(struct snd_ymfpci *chip)
 
 #else /* use fw_loader */
 
-#ifdef __LITTLE_ENDIAN
-static inline void snd_ymfpci_convert_from_le(const struct firmware *fw) { }
-#else
-static void snd_ymfpci_convert_from_le(const struct firmware *fw)
-{
-	int i;
-	u32 *data = (u32 *)fw->data;
-
-	for (i = 0; i < fw->size / 4; ++i)
-		le32_to_cpus(&data[i]);
-}
-#endif
-
 static int snd_ymfpci_request_firmware(struct snd_ymfpci *chip)
 {
 	int err, is_1e;
@@ -2050,9 +2061,7 @@ static int snd_ymfpci_request_firmware(struct snd_ymfpci *chip)
 	err = request_firmware(&chip->dsp_microcode, "yamaha/ds1_dsp.fw",
 			       &chip->pci->dev);
 	if (err >= 0) {
-		if (chip->dsp_microcode->size == YDSXG_DSPLENGTH)
-			snd_ymfpci_convert_from_le(chip->dsp_microcode);
-		else {
+		if (chip->dsp_microcode->size != YDSXG_DSPLENGTH) {
 			snd_printk(KERN_ERR "DSP microcode has wrong size\n");
 			err = -EINVAL;
 		}
@@ -2067,9 +2076,7 @@ static int snd_ymfpci_request_firmware(struct snd_ymfpci *chip)
 	err = request_firmware(&chip->controller_microcode, name,
 			       &chip->pci->dev);
 	if (err >= 0) {
-		if (chip->controller_microcode->size == YDSXG_CTRLLENGTH)
-			snd_ymfpci_convert_from_le(chip->controller_microcode);
-		else {
+		if (chip->controller_microcode->size != YDSXG_CTRLLENGTH) {
 			snd_printk(KERN_ERR "controller microcode"
 				   " has wrong size\n");
 			err = -EINVAL;
@@ -2090,7 +2097,7 @@ static void snd_ymfpci_download_image(struct snd_ymfpci *chip)
 {
 	int i;
 	u16 ctrl;
-	u32 *inst;
+	const __le32 *inst;
 
 	snd_ymfpci_writel(chip, YDSXGR_NATIVEDACOUTVOL, 0x00000000);
 	snd_ymfpci_disable_dsp(chip);
@@ -2105,14 +2112,16 @@ static void snd_ymfpci_download_image(struct snd_ymfpci *chip)
 	snd_ymfpci_writew(chip, YDSXGR_GLOBALCTRL, ctrl & ~0x0007);
 
 	/* setup DSP instruction code */
-	inst = (u32 *)chip->dsp_microcode->data;
+	inst = (const __le32 *)chip->dsp_microcode->data;
 	for (i = 0; i < YDSXG_DSPLENGTH / 4; i++)
-		snd_ymfpci_writel(chip, YDSXGR_DSPINSTRAM + (i << 2), inst[i]);
+		snd_ymfpci_writel(chip, YDSXGR_DSPINSTRAM + (i << 2),
+				  le32_to_cpu(inst[i]));
 
 	/* setup control instruction code */
-	inst = (u32 *)chip->controller_microcode->data;
+	inst = (const __le32 *)chip->controller_microcode->data;
 	for (i = 0; i < YDSXG_CTRLLENGTH / 4; i++)
-		snd_ymfpci_writel(chip, YDSXGR_CTRLINSTRAM + (i << 2), inst[i]);
+		snd_ymfpci_writel(chip, YDSXGR_CTRLINSTRAM + (i << 2),
+				  le32_to_cpu(inst[i]));
 
 	snd_ymfpci_enable_dsp(chip);
 }
-- 
1.5.4.5


-- 
dwmw2


  parent reply	other threads:[~2008-05-29 12:21 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-25 10:23 [PATCHv2 00/28] Allow built-in firmware to be accessed by request_firmware() David Woodhouse
2008-05-25 10:23 ` [PATCHv2 01/28] libertas: treat firmware data as const David Woodhouse
2008-05-25 13:06   ` Alan Cox
2008-05-25 10:23 ` [PATCHv2 02/28] bluetooth: " David Woodhouse
2008-05-25 13:07   ` Alan Cox
2008-05-25 10:23 ` [PATCHv2 03/28] cyclades: " David Woodhouse
2008-05-25 13:07   ` Alan Cox
2008-05-25 10:23 ` [PATCHv2 04/28] cx25840: " David Woodhouse
2008-05-25 10:51   ` Hans Verkuil
2008-05-25 14:36     ` David Woodhouse
2008-05-25 14:56     ` David Woodhouse
2008-05-25 15:04       ` Hans Verkuil
2008-05-25 15:37       ` Mike Isely
2008-05-25 15:20     ` Mike Isely
2008-05-25 16:16       ` Tyler Trafford
2008-05-25 10:23 ` [PATCHv2 05/28] myri10ge: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 06/28] vx222: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 07/28] riptide: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 08/28] pcxhr: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 09/28] vx: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 10/28] ueagle-atm: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 11/28] cxacru: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 12/28] aic94xx: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 13/28] zd1201: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 14/28] rt2x00: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 15/28] p54: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 16/28] atmel: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 17/28] irda-usb: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 18/28] cxgb3: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 19/28] bt8xx: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 20/28] ttusb-dec: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 21/28] dvb frontends: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 22/28] cxusb: " David Woodhouse
2008-05-25 14:14   ` Michael Krufky
2008-05-25 14:27     ` David Woodhouse
2008-05-25 15:02     ` David Woodhouse
2008-05-25 10:23 ` [PATCHv2 23/28] gp8psk: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 24/28] tuners: " David Woodhouse
2008-05-25 10:23 ` [PATCHv2 25/28] firmware: make fw->data const David Woodhouse
2008-05-25 10:23 ` [PATCHv2 26/28] firmware: allow firmware files to be built into kernel image David Woodhouse
2008-05-30  5:08   ` Rusty Russell
2008-05-31  8:39     ` David Woodhouse
2008-05-25 10:23 ` [PATCHv2 27/28] firmware: Add CONFIG_BUILTIN_FIRMWARE option David Woodhouse
2008-05-25 17:00   ` [PATCHv3 " David Woodhouse
2008-05-26  8:58     ` David Woodhouse
2008-05-28 11:46       ` [PATCHv4 " David Woodhouse
2008-05-29  8:29         ` [PATCH 29/28] firmware: Add 'firmware_install' make target David Woodhouse
2008-05-25 10:23 ` [PATCHv2 28/28] firmware: convert korg1212 driver to use firmware loader exclusively David Woodhouse
2008-05-25 13:11   ` Alan Cox
2008-05-27 18:33     ` Yinghai Lu
2008-05-27 21:24       ` David Woodhouse
2008-05-29  9:09 ` [PATCHv2 #ERROR!/28] maestro3: treat firmware data as const David Woodhouse
2008-05-29 10:49   ` [PATCHv2 30/28] firmware: convert maestro3 driver to use firmware loader exclusively David Woodhouse
2008-05-29 12:21 ` David Woodhouse [this message]
2008-05-29 12:23   ` [PATCH N/28] firmware: convert ymfpci " David Woodhouse
2008-05-29 13:47 ` [PATCH] smctr: use request_firmware() David Woodhouse
2008-05-29 19:30   ` maximilian attems
2008-05-29 21:02     ` David Woodhouse
2008-05-29 14:20 ` [PATCH] kaweth: " David Woodhouse
2008-05-30 13:55   ` Oliver Neukum
2008-05-30 15:16     ` David Woodhouse
2008-05-30 15:26       ` Marcel Holtmann
2008-05-30 15:48         ` Alan Cox
2008-05-30 21:02           ` Oliver Neukum
2008-05-31  0:00             ` Alexandre Oliva
2008-05-31  6:51           ` Marcel Holtmann
2008-05-31 12:35             ` Alan Cox
2008-05-29 17:49 ` [PATCH] ttusb-budget: " David Woodhouse
2008-06-13 19:23   ` Mauro Carvalho Chehab
2008-05-30 11:45 ` [PATCH] keyspan: " David Woodhouse
2008-05-30 13:54   ` Hugh Blemings
2008-05-30 12:19 ` [PATCH] keyspan_pda: " David Woodhouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1212063672.26088.16.camel@shinybook.infradead.org \
    --to=dwmw2@infradead.org \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=sam@ravnborg.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®