Re: [PATCH/RFC] remove irqs_disabled warning from local_bh_enable

[Johannes Berg <johannes@sipsolutions.net>]

[-- Attachment #1: Type: text/plain, Size: 2165 bytes --]

On Fri, 2008-06-20 at 17:43 +0200, Johannes Berg wrote:
> On Fri, 2008-06-20 at 17:27 +0200, Ingo Molnar wrote:
> > * Ingo Molnar <mingo@elte.hu> wrote:
> > 
> > > > Subject: clean up and comment local_bh_enable code
> > > > 
> > > > There's no need to use local_irq_save() over local_irq_disable() in 
> > > > the local_bh_enable code since it is a bug to call it with irqs 
> > > > disabled and do_softirq will enable irqs if there is any pending 
> > > > work. Consolidate the code from local_bh_enable and ..._ip to avoid 
> > > > having a disconnect between them in the warnings they trigger that 
> > > > is currently there. Also always trigger the warning on in_irq(), not 
> > > > just in the trace-irqflags case.
> > > 
> > > applied to tip/core/softirq for testing, thanks Johannes.
> > 
> > ok, -tip testing found that your patch triggers a new warning on an old 
> > testbox that uses 3c59x vortex and netlogging:
> > 
> > ----->
> > calling  vortex_init+0x0/0xb0
> > PCI: Found IRQ 10 for device 0000:00:0b.0
> > PCI: Sharing IRQ 10 with 0000:00:0a.0
> > PCI: Sharing IRQ 10 with 0000:00:0b.1
> > 3c59x: Donald Becker and others.
> > 0000:00:0b.0: 3Com PCI 3c556 Laptop Tornado at e0800400.
> > PCI: Enabling bus mastering for device 0000:00:0b.0
> > initcall vortex_init+0x0/0xb0 returned 0 after 47 msecs
> > ...
> > calling  init_netconsole+0x0/0x1b0
> > netconsole: local port 4444
> > netconsole: local IP 10.0.1.9
> > netconsole: interface eth0
> > netconsole: remote port 4444
> > netconsole: remote IP 10.0.1.16
> > netconsole: remote ethernet address 00:19:xx:xx:xx:xx
> > netconsole: device eth0 not up yet, forcing it
> > eth0:  setting half-duplex.
> > eth0:  setting full-duplex.
> > ------------[ cut here ]------------
> > WARNING: at kernel/softirq.c:137 local_bh_enable_ip+0xd1/0xe0()
> > Pid: 1, comm: swapper Not tainted 2.6.26-rc6-tip #2091
> >  [<c0125ecf>] warn_on_slowpath+0x4f/0x70
> >  [<c0126834>] ? release_console_sem+0x1b4/0x1d0
> >  [<c0126d00>] ? vprintk+0x2a0/0x450
> 
> Now you can't printk in irq context any more?

Or I'm just confused by x86 stack dumps.

johannes

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]