From: Mark Fasheh <mfasheh@suse.com>
To: linux-kernel@vger.kernel.org
Cc: ocfs2-devel@oss.oracle.com, Joel Becker <joel.becker@oracle.com>,
"Theodore Ts'o" <tytso@mit.edu>, <linux-ext4@vger.kernel.org>,
Mark Fasheh <mfasheh@suse.com>
Subject: [PATCH 01/35] jbd2: Add buffer triggers
Date: Thu, 25 Dec 2008 10:04:16 -0800 [thread overview]
Message-ID: <1230228290-22803-2-git-send-email-mfasheh@suse.com> (raw)
In-Reply-To: <1230228290-22803-1-git-send-email-mfasheh@suse.com>
From: Joel Becker <joel.becker@oracle.com>
Filesystems often to do compute intensive operation on some
metadata. If this operation is repeated many times, it can be very
expensive. It would be much nicer if the operation could be performed
once before a buffer goes to disk.
This adds triggers to jbd2 buffer heads. Just before writing a metadata
buffer to the journal, jbd2 will optionally call a commit trigger associated
with the buffer. If the journal is aborted, an abort trigger will be
called on any dirty buffers as they are dropped from pending
transactions.
ocfs2 will use this feature.
Initially I tried to come up with a more generic trigger that could be
used for non-buffer-related events like transaction completion. It
doesn't tie nicely, because the information a buffer trigger needs
(specific to a journal_head) isn't the same as what a transaction
trigger needs (specific to a tranaction_t or perhaps journal_t). So I
implemented a buffer set, with the understanding that
journal/transaction wide triggers should be implemented separately.
There is only one trigger set allowed per buffer. I can't think of any
reason to attach more than one set. Contrast this with a journal or
transaction in which multiple places may want to watch the entire
transaction separately.
The trigger sets are considered static allocation from the jbd2
perspective. ocfs2 will just have one trigger set per block type,
setting the same set on every bh of the same type.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
---
fs/jbd2/commit.c | 9 ++++++++
fs/jbd2/journal.c | 19 +++++++++++++++++
fs/jbd2/transaction.c | 47 ++++++++++++++++++++++++++++++++++++++++++
include/linux/jbd2.h | 31 +++++++++++++++++++++++++++
include/linux/journal-head.h | 8 +++++++
5 files changed, 114 insertions(+), 0 deletions(-)
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index ebc667b..c8a1bac 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -509,6 +509,10 @@ void jbd2_journal_commit_transaction(journal_t *journal)
if (is_journal_aborted(journal)) {
clear_buffer_jbddirty(jh2bh(jh));
JBUFFER_TRACE(jh, "journal is aborting: refile");
+ jbd2_buffer_abort_trigger(jh,
+ jh->b_frozen_data ?
+ jh->b_frozen_triggers :
+ jh->b_triggers);
jbd2_journal_refile_buffer(journal, jh);
/* If that was the last one, we need to clean up
* any descriptor buffers which may have been
@@ -844,6 +848,9 @@ restart_loop:
* data.
*
* Otherwise, we can just throw away the frozen data now.
+ *
+ * We also know that the frozen data has already fired
+ * its triggers if they exist, so we can clear that too.
*/
if (jh->b_committed_data) {
jbd2_free(jh->b_committed_data, bh->b_size);
@@ -851,10 +858,12 @@ restart_loop:
if (jh->b_frozen_data) {
jh->b_committed_data = jh->b_frozen_data;
jh->b_frozen_data = NULL;
+ jh->b_frozen_triggers = NULL;
}
} else if (jh->b_frozen_data) {
jbd2_free(jh->b_frozen_data, bh->b_size);
jh->b_frozen_data = NULL;
+ jh->b_frozen_triggers = NULL;
}
spin_lock(&journal->j_list_lock);
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index e70d657..f6bff9d 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -50,6 +50,7 @@ EXPORT_SYMBOL(jbd2_journal_unlock_updates);
EXPORT_SYMBOL(jbd2_journal_get_write_access);
EXPORT_SYMBOL(jbd2_journal_get_create_access);
EXPORT_SYMBOL(jbd2_journal_get_undo_access);
+EXPORT_SYMBOL(jbd2_journal_set_triggers);
EXPORT_SYMBOL(jbd2_journal_dirty_metadata);
EXPORT_SYMBOL(jbd2_journal_release_buffer);
EXPORT_SYMBOL(jbd2_journal_forget);
@@ -290,6 +291,7 @@ int jbd2_journal_write_metadata_buffer(transaction_t *transaction,
struct page *new_page;
unsigned int new_offset;
struct buffer_head *bh_in = jh2bh(jh_in);
+ struct jbd2_buffer_trigger_type *triggers;
/*
* The buffer really shouldn't be locked: only the current committing
@@ -314,13 +316,23 @@ repeat:
done_copy_out = 1;
new_page = virt_to_page(jh_in->b_frozen_data);
new_offset = offset_in_page(jh_in->b_frozen_data);
+ triggers = jh_in->b_frozen_triggers;
} else {
new_page = jh2bh(jh_in)->b_page;
new_offset = offset_in_page(jh2bh(jh_in)->b_data);
+ triggers = jh_in->b_triggers;
}
mapped_data = kmap_atomic(new_page, KM_USER0);
/*
+ * Fire any commit trigger. Do this before checking for escaping,
+ * as the trigger may modify the magic offset. If a copy-out
+ * happens afterwards, it will have the correct data in the buffer.
+ */
+ jbd2_buffer_commit_trigger(jh_in, mapped_data + new_offset,
+ triggers);
+
+ /*
* Check for escaping
*/
if (*((__be32 *)(mapped_data + new_offset)) ==
@@ -352,6 +364,13 @@ repeat:
new_page = virt_to_page(tmp);
new_offset = offset_in_page(tmp);
done_copy_out = 1;
+
+ /*
+ * This isn't strictly necessary, as we're using frozen
+ * data for the escaping, but it keeps consistency with
+ * b_frozen_data usage.
+ */
+ jh_in->b_frozen_triggers = jh_in->b_triggers;
}
/*
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 39b7805..4f925a4 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -741,6 +741,12 @@ done:
source = kmap_atomic(page, KM_USER0);
memcpy(jh->b_frozen_data, source+offset, jh2bh(jh)->b_size);
kunmap_atomic(source, KM_USER0);
+
+ /*
+ * Now that the frozen data is saved off, we need to store
+ * any matching triggers.
+ */
+ jh->b_frozen_triggers = jh->b_triggers;
}
jbd_unlock_bh_state(bh);
@@ -944,6 +950,47 @@ out:
}
/**
+ * void jbd2_journal_set_triggers() - Add triggers for commit writeout
+ * @bh: buffer to trigger on
+ * @type: struct jbd2_buffer_trigger_type containing the trigger(s).
+ *
+ * Set any triggers on this journal_head. This is always safe, because
+ * triggers for a committing buffer will be saved off, and triggers for
+ * a running transaction will match the buffer in that transaction.
+ *
+ * Call with NULL to clear the triggers.
+ */
+void jbd2_journal_set_triggers(struct buffer_head *bh,
+ struct jbd2_buffer_trigger_type *type)
+{
+ struct journal_head *jh = bh2jh(bh);
+
+ jh->b_triggers = type;
+}
+
+void jbd2_buffer_commit_trigger(struct journal_head *jh, void *mapped_data,
+ struct jbd2_buffer_trigger_type *triggers)
+{
+ struct buffer_head *bh = jh2bh(jh);
+
+ if (!triggers || !triggers->t_commit)
+ return;
+
+ triggers->t_commit(triggers, bh, mapped_data, bh->b_size);
+}
+
+void jbd2_buffer_abort_trigger(struct journal_head *jh,
+ struct jbd2_buffer_trigger_type *triggers)
+{
+ if (!triggers || !triggers->t_abort)
+ return;
+
+ triggers->t_abort(triggers, jh2bh(jh));
+}
+
+
+
+/**
* int jbd2_journal_dirty_metadata() - mark a buffer as containing dirty metadata
* @handle: transaction to add buffer to.
* @bh: buffer to mark
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index f366457..3445647 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1008,6 +1008,35 @@ int __jbd2_journal_clean_checkpoint_list(journal_t *journal);
int __jbd2_journal_remove_checkpoint(struct journal_head *);
void __jbd2_journal_insert_checkpoint(struct journal_head *, transaction_t *);
+
+/*
+ * Triggers
+ */
+
+struct jbd2_buffer_trigger_type {
+ /*
+ * Fired just before a buffer is written to the journal.
+ * mapped_data is a mapped buffer that is the frozen data for
+ * commit.
+ */
+ void (*t_commit)(struct jbd2_buffer_trigger_type *type,
+ struct buffer_head *bh, void *mapped_data,
+ size_t size);
+
+ /*
+ * Fired during journal abort for dirty buffers that will not be
+ * committed.
+ */
+ void (*t_abort)(struct jbd2_buffer_trigger_type *type,
+ struct buffer_head *bh);
+};
+
+extern void jbd2_buffer_commit_trigger(struct journal_head *jh,
+ void *mapped_data,
+ struct jbd2_buffer_trigger_type *triggers);
+extern void jbd2_buffer_abort_trigger(struct journal_head *jh,
+ struct jbd2_buffer_trigger_type *triggers);
+
/* Buffer IO */
extern int
jbd2_journal_write_metadata_buffer(transaction_t *transaction,
@@ -1046,6 +1075,8 @@ extern int jbd2_journal_extend (handle_t *, int nblocks);
extern int jbd2_journal_get_write_access(handle_t *, struct buffer_head *);
extern int jbd2_journal_get_create_access (handle_t *, struct buffer_head *);
extern int jbd2_journal_get_undo_access(handle_t *, struct buffer_head *);
+void jbd2_journal_set_triggers(struct buffer_head *,
+ struct jbd2_buffer_trigger_type *type);
extern int jbd2_journal_dirty_metadata (handle_t *, struct buffer_head *);
extern void jbd2_journal_release_buffer (handle_t *, struct buffer_head *);
extern int jbd2_journal_forget (handle_t *, struct buffer_head *);
diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h
index bb70ebb..525aac3 100644
--- a/include/linux/journal-head.h
+++ b/include/linux/journal-head.h
@@ -12,6 +12,8 @@
typedef unsigned int tid_t; /* Unique transaction ID */
typedef struct transaction_s transaction_t; /* Compound transaction type */
+
+
struct buffer_head;
struct journal_head {
@@ -87,6 +89,12 @@ struct journal_head {
* [j_list_lock]
*/
struct journal_head *b_cpnext, *b_cpprev;
+
+ /* Trigger type */
+ struct jbd2_buffer_trigger_type *b_triggers;
+
+ /* Trigger type for the committing transaction's frozen data */
+ struct jbd2_buffer_trigger_type *b_frozen_triggers;
};
#endif /* JOURNAL_HEAD_H_INCLUDED */
--
1.5.6
next prev parent reply other threads:[~2008-12-25 18:05 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-25 18:04 [git patches] Ocfs2 patches for merge window, batch 3/3 Mark Fasheh
2008-12-25 18:04 ` Mark Fasheh [this message]
2008-12-31 18:16 ` [Ocfs2-devel] [PATCH 01/35] jbd2: Add buffer triggers Mark Fasheh
2008-12-25 18:04 ` [PATCH 02/35] ocfs2: Add the on-disk structures for metadata checksums Mark Fasheh
2008-12-25 18:04 ` [PATCH 03/35] ocfs2: Add the underlying blockcheck code Mark Fasheh
2008-12-25 18:04 ` [PATCH 04/35] ocfs2: Add a validation hook for quota block reads Mark Fasheh
2008-12-25 18:04 ` [PATCH 05/35] ocfs2: block read meta ecc Mark Fasheh
2008-12-25 18:04 ` [PATCH 06/35] ocfs2: Add journal_access functions with jbd2 triggers Mark Fasheh
2008-12-25 18:04 ` [PATCH 07/35] ocfs2: Wrap up the common use cases of ocfs2_new_path() Mark Fasheh
2008-12-25 18:04 ` [PATCH 08/35] ocfs2: Use metadata-specific ocfs2_journal_access_*() functions Mark Fasheh
2008-12-25 18:04 ` [PATCH 09/35] ocfs2: Add ecc and checksums to ocfs2 xattr buckets Mark Fasheh
2008-12-25 18:04 ` [PATCH 10/35] ocfs2: Create ocfs2_xattr_value_buf Mark Fasheh
2008-12-25 18:04 ` [PATCH 11/35] ocfs2: Pull ocfs2_xattr_value_buf up from __ocfs2_remove_xattr_range() Mark Fasheh
2008-12-25 18:04 ` [PATCH 12/35] ocfs2: Pull ocfs2_xattr_value_buf up into ocfs2_xattr_value_truncate() Mark Fasheh
2008-12-25 18:04 ` [PATCH 13/35] ocfs2: Pass ocfs2_xattr_value_buf " Mark Fasheh
2008-12-25 18:04 ` [PATCH 14/35] ocfs2: Pass value buf to ocfs2_xattr_update_entry() Mark Fasheh
2008-12-25 18:04 ` [PATCH 15/35] ocfs2: Use ocfs2_xattr_value_buf in ocfs2_xattr_set_entry() Mark Fasheh
2008-12-25 18:04 ` [PATCH 16/35] ocfs2: Pass value buf to ocfs2_remove_value_outside() Mark Fasheh
2008-12-25 18:04 ` [PATCH 17/35] ocfs2: Use proper journal_access function in xattr.c Mark Fasheh
2008-12-25 18:04 ` [PATCH 18/35] ocfs2: Add directory block trailers Mark Fasheh
2008-12-25 18:04 ` [PATCH 19/35] ocfs2: Checksum and ECC for directory blocks Mark Fasheh
2008-12-25 18:04 ` [PATCH 20/35] ocfs2: Validate superblock with checksum and ecc Mark Fasheh
2008-12-25 18:04 ` [PATCH 21/35] ocfs2: Enable metadata checksums Mark Fasheh
2008-12-25 18:04 ` [PATCH 22/35] ocfs2: Don't hand-code xor in ocfs2_hamming_encode() Mark Fasheh
2008-12-25 18:04 ` [PATCH 23/35] ocfs2: Another hamming code optimization Mark Fasheh
2008-12-25 18:04 ` [PATCH 24/35] ocfs2: One more " Mark Fasheh
2008-12-25 18:04 ` [PATCH 25/35] ocfs2/dlm: Fix a race between migrate request and exit domain Mark Fasheh
2008-12-25 18:04 ` [PATCH 26/35] ocfs2/dlm: Clean up errors in dlm_proxy_ast_handler() Mark Fasheh
2008-12-25 18:04 ` [PATCH 27/35] ocfs2/dlm: Hold off sending lockres drop ref message while lockres is migrating Mark Fasheh
2008-12-25 18:04 ` [PATCH 28/35] ocfs2/dlm: Fix race in adding/removing lockres' to/from the tracking list Mark Fasheh
2008-12-25 18:04 ` [PATCH 29/35] ocfs2/dlm: Fix race during lockres mastery Mark Fasheh
2008-12-25 18:04 ` [PATCH 30/35] ocfs2/xattr: Remove extend_trans call and add its credits from the beginning Mark Fasheh
2008-12-25 18:04 ` [PATCH 31/35] ocfs2/xattr: Always updating ctime during xattr set Mark Fasheh
2008-12-25 18:04 ` [PATCH 32/35] ocfs2/xattr: fix credits calculation during index create Mark Fasheh
2008-12-25 18:04 ` [PATCH 33/35] ocfs2: calculate and reserve credits for xattr value in mknod Mark Fasheh
2008-12-25 18:04 ` [PATCH 34/35] ocfs2: alloc xattr bucket in ocfs2_xattr_set_handle Mark Fasheh
2008-12-25 18:04 ` [PATCH 35/35] ocfs2: Add xattr support checking in init_security Mark Fasheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1230228290-22803-2-git-send-email-mfasheh@suse.com \
--to=mfasheh@suse.com \
--cc=joel.becker@oracle.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ocfs2-devel@oss.oracle.com \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®