From: Mark Fasheh <mfasheh@suse.com>
To: linux-kernel@vger.kernel.org
Cc: ocfs2-devel@oss.oracle.com, Joel Becker <joel.becker@oracle.com>,
Mark Fasheh <mfasheh@suse.com>
Subject: [PATCH 02/35] ocfs2: Add the on-disk structures for metadata checksums.
Date: Thu, 25 Dec 2008 10:04:17 -0800 [thread overview]
Message-ID: <1230228290-22803-3-git-send-email-mfasheh@suse.com> (raw)
In-Reply-To: <1230228290-22803-1-git-send-email-mfasheh@suse.com>
From: Joel Becker <joel.becker@oracle.com>
Define struct ocfs2_block_check, an 8-byte structure containing a 32bit
crc32_le and a 16bit hamming code ecc. This will be used for metadata
checksums. Add the structure to free spaces in the various metadata
structures.
Add the OCFS2_FEATURE_INCOMPAT_META_ECC bit.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
---
fs/ocfs2/ocfs2_fs.h | 55 ++++++++++++++++++++++++++++++++++++++++++++++----
1 files changed, 50 insertions(+), 5 deletions(-)
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index 359732e..290fa26 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -149,6 +149,9 @@
/* Support for extended attributes */
#define OCFS2_FEATURE_INCOMPAT_XATTR 0x0200
+/* Metadata checksum and error correction */
+#define OCFS2_FEATURE_INCOMPAT_META_ECC 0x0800
+
/*
* backup superblock flag is used to indicate that this volume
* has backup superblocks.
@@ -427,6 +430,22 @@ static unsigned char ocfs2_type_by_mode[S_IFMT >> S_SHIFT] = {
#define OCFS2_RAW_SB(dinode) (&((dinode)->id2.i_super))
/*
+ * Block checking structure. This is used in metadata to validate the
+ * contents. If OCFS2_FEATURE_INCOMPAT_META_ECC is not set, it is all
+ * zeros.
+ */
+struct ocfs2_block_check {
+/*00*/ __le32 bc_crc32e; /* 802.3 Ethernet II CRC32 */
+ __le16 bc_ecc; /* Single-error-correction parity vector.
+ This is a simple Hamming code dependant
+ on the blocksize. OCFS2's maximum
+ blocksize, 4K, requires 16 parity bits,
+ so we fit in __le16. */
+ __le16 bc_reserved1;
+/*08*/
+};
+
+/*
* On disk extent record for OCFS2
* It describes a range of clusters on disk.
*
@@ -513,7 +532,7 @@ struct ocfs2_truncate_log {
struct ocfs2_extent_block
{
/*00*/ __u8 h_signature[8]; /* Signature for verification */
- __le64 h_reserved1;
+ struct ocfs2_block_check h_check; /* Error checking */
/*10*/ __le16 h_suballoc_slot; /* Slot suballocator this
extent_header belongs to */
__le16 h_suballoc_bit; /* Bit offset in suballocator
@@ -683,7 +702,8 @@ struct ocfs2_dinode {
was set in i_flags */
__le16 i_dyn_features;
__le64 i_xattr_loc;
-/*80*/ __le64 i_reserved2[7];
+/*80*/ struct ocfs2_block_check i_check; /* Error checking */
+/*88*/ __le64 i_reserved2[6];
/*B8*/ union {
__le64 i_pad1; /* Generic way to refer to this
64bit union */
@@ -750,7 +770,8 @@ struct ocfs2_group_desc
/*20*/ __le64 bg_parent_dinode; /* dinode which owns me, in
blocks */
__le64 bg_blkno; /* Offset on disk, in blocks */
-/*30*/ __le64 bg_reserved2[2];
+/*30*/ struct ocfs2_block_check bg_check; /* Error checking */
+ __le64 bg_reserved2;
/*40*/ __u8 bg_bitmap[0];
};
@@ -793,7 +814,12 @@ struct ocfs2_xattr_header {
in this extent record,
only valid in the first
bucket. */
- __le64 xh_csum;
+ struct ocfs2_block_check xh_check; /* Error checking
+ (Note, this is only
+ used for xattr
+ buckets. A block uses
+ xb_check and sets
+ this field to zero.) */
struct ocfs2_xattr_entry xh_entries[0]; /* xattr entry list. */
};
@@ -844,7 +870,7 @@ struct ocfs2_xattr_block {
block group */
__le32 xb_fs_generation; /* Must match super block */
/*10*/ __le64 xb_blkno; /* Offset on disk, in blocks */
- __le64 xb_csum;
+ struct ocfs2_block_check xb_check; /* Error checking */
/*20*/ __le16 xb_flags; /* Indicates whether this block contains
real xattr or a xattr tree. */
__le16 xb_reserved0;
@@ -988,6 +1014,25 @@ struct ocfs2_local_disk_dqblk {
/*10*/ __le64 dqb_inodemod; /* Change in the amount of used inodes */
};
+
+/*
+ * The quota trailer lives at the end of each quota block.
+ */
+
+struct ocfs2_disk_dqtrailer {
+/*00*/ struct ocfs2_block_check dq_check; /* Error checking */
+/*08*/ /* Cannot be larger than OCFS2_QBLK_RESERVED_SPACE */
+};
+
+static inline struct ocfs2_disk_dqtrailer *ocfs2_block_dqtrailer(int blocksize,
+ void *buf)
+{
+ char *ptr = buf;
+ ptr += blocksize - OCFS2_QBLK_RESERVED_SPACE;
+
+ return (struct ocfs2_disk_dqtrailer *)ptr;
+}
+
#ifdef __KERNEL__
static inline int ocfs2_fast_symlink_chars(struct super_block *sb)
{
--
1.5.6
next prev parent reply other threads:[~2008-12-25 18:05 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-25 18:04 [git patches] Ocfs2 patches for merge window, batch 3/3 Mark Fasheh
2008-12-25 18:04 ` [PATCH 01/35] jbd2: Add buffer triggers Mark Fasheh
2008-12-31 18:16 ` [Ocfs2-devel] " Mark Fasheh
2008-12-25 18:04 ` Mark Fasheh [this message]
2008-12-25 18:04 ` [PATCH 03/35] ocfs2: Add the underlying blockcheck code Mark Fasheh
2008-12-25 18:04 ` [PATCH 04/35] ocfs2: Add a validation hook for quota block reads Mark Fasheh
2008-12-25 18:04 ` [PATCH 05/35] ocfs2: block read meta ecc Mark Fasheh
2008-12-25 18:04 ` [PATCH 06/35] ocfs2: Add journal_access functions with jbd2 triggers Mark Fasheh
2008-12-25 18:04 ` [PATCH 07/35] ocfs2: Wrap up the common use cases of ocfs2_new_path() Mark Fasheh
2008-12-25 18:04 ` [PATCH 08/35] ocfs2: Use metadata-specific ocfs2_journal_access_*() functions Mark Fasheh
2008-12-25 18:04 ` [PATCH 09/35] ocfs2: Add ecc and checksums to ocfs2 xattr buckets Mark Fasheh
2008-12-25 18:04 ` [PATCH 10/35] ocfs2: Create ocfs2_xattr_value_buf Mark Fasheh
2008-12-25 18:04 ` [PATCH 11/35] ocfs2: Pull ocfs2_xattr_value_buf up from __ocfs2_remove_xattr_range() Mark Fasheh
2008-12-25 18:04 ` [PATCH 12/35] ocfs2: Pull ocfs2_xattr_value_buf up into ocfs2_xattr_value_truncate() Mark Fasheh
2008-12-25 18:04 ` [PATCH 13/35] ocfs2: Pass ocfs2_xattr_value_buf " Mark Fasheh
2008-12-25 18:04 ` [PATCH 14/35] ocfs2: Pass value buf to ocfs2_xattr_update_entry() Mark Fasheh
2008-12-25 18:04 ` [PATCH 15/35] ocfs2: Use ocfs2_xattr_value_buf in ocfs2_xattr_set_entry() Mark Fasheh
2008-12-25 18:04 ` [PATCH 16/35] ocfs2: Pass value buf to ocfs2_remove_value_outside() Mark Fasheh
2008-12-25 18:04 ` [PATCH 17/35] ocfs2: Use proper journal_access function in xattr.c Mark Fasheh
2008-12-25 18:04 ` [PATCH 18/35] ocfs2: Add directory block trailers Mark Fasheh
2008-12-25 18:04 ` [PATCH 19/35] ocfs2: Checksum and ECC for directory blocks Mark Fasheh
2008-12-25 18:04 ` [PATCH 20/35] ocfs2: Validate superblock with checksum and ecc Mark Fasheh
2008-12-25 18:04 ` [PATCH 21/35] ocfs2: Enable metadata checksums Mark Fasheh
2008-12-25 18:04 ` [PATCH 22/35] ocfs2: Don't hand-code xor in ocfs2_hamming_encode() Mark Fasheh
2008-12-25 18:04 ` [PATCH 23/35] ocfs2: Another hamming code optimization Mark Fasheh
2008-12-25 18:04 ` [PATCH 24/35] ocfs2: One more " Mark Fasheh
2008-12-25 18:04 ` [PATCH 25/35] ocfs2/dlm: Fix a race between migrate request and exit domain Mark Fasheh
2008-12-25 18:04 ` [PATCH 26/35] ocfs2/dlm: Clean up errors in dlm_proxy_ast_handler() Mark Fasheh
2008-12-25 18:04 ` [PATCH 27/35] ocfs2/dlm: Hold off sending lockres drop ref message while lockres is migrating Mark Fasheh
2008-12-25 18:04 ` [PATCH 28/35] ocfs2/dlm: Fix race in adding/removing lockres' to/from the tracking list Mark Fasheh
2008-12-25 18:04 ` [PATCH 29/35] ocfs2/dlm: Fix race during lockres mastery Mark Fasheh
2008-12-25 18:04 ` [PATCH 30/35] ocfs2/xattr: Remove extend_trans call and add its credits from the beginning Mark Fasheh
2008-12-25 18:04 ` [PATCH 31/35] ocfs2/xattr: Always updating ctime during xattr set Mark Fasheh
2008-12-25 18:04 ` [PATCH 32/35] ocfs2/xattr: fix credits calculation during index create Mark Fasheh
2008-12-25 18:04 ` [PATCH 33/35] ocfs2: calculate and reserve credits for xattr value in mknod Mark Fasheh
2008-12-25 18:04 ` [PATCH 34/35] ocfs2: alloc xattr bucket in ocfs2_xattr_set_handle Mark Fasheh
2008-12-25 18:04 ` [PATCH 35/35] ocfs2: Add xattr support checking in init_security Mark Fasheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1230228290-22803-3-git-send-email-mfasheh@suse.com \
--to=mfasheh@suse.com \
--cc=joel.becker@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=ocfs2-devel@oss.oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®