* Re: [PATCH net-next] myri_sbus: use request_firmware
[not found] <1238701097.3099.82.camel@ht.satnam>
@ 2009-04-02 19:52 ` Jaswinder Singh Rajput
2009-04-04 23:38 ` David Miller
1 sibling, 0 replies; 2+ messages in thread
From: Jaswinder Singh Rajput @ 2009-04-02 19:52 UTC (permalink / raw)
To: David Miller; +Cc: netdev, LKML, David Woodhouse
On Fri, 2009-04-03 at 01:09 +0530, Jaswinder Singh Rajput wrote:
> Hello David,
>
> I do not have any machine to test this patch. If you find any issues
> then let me know.
>
> Thanks,
>
> From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
> Subject: [PATCH] myri_sbus: use request_firmware
>
> ---
> Firmware blob looks like this...
>
> __be16 lanai4_data_size
> unsigned char lanai4_code[]
>
> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
It seems LKML rejected this email because of big size, so CC LKML after
deleting firmware blob:
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Subject: [PATCH] myri_sbus: use request_firmware
Firmware blob looks like this...
__be16 lanai4_data_size
unsigned char lanai4_code[]
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
---
drivers/net/myri_code.h | 5006 ---------------------------------------
drivers/net/myri_sbus.c | 37 +-
firmware/Makefile | 1 +
firmware/WHENCE | 10 +
firmware/myricom/lanai.bin.ihex | 4771 +++++++++++++++++++++++++++++++++++++
5 files changed, 4812 insertions(+), 5013 deletions(-)
delete mode 100644 drivers/net/myri_code.h
create mode 100644 firmware/myricom/lanai.bin.ihex
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index 08534c0..9a802ad 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -25,6 +25,7 @@ static char version[] =
#include <linux/dma-mapping.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/firmware.h>
#include <net/dst.h>
#include <net/arp.h>
@@ -43,7 +44,6 @@ static char version[] =
#include <asm/irq.h>
#include "myri_sbus.h"
-#include "myri_code.h"
/* #define DEBUG_DETECT */
/* #define DEBUG_IRQ */
@@ -81,6 +81,9 @@ static char version[] =
#define DHDR(x)
#endif
+/* Firmware name */
+#define FWNAME "myricom/lanai.bin"
+
static void myri_reset_off(void __iomem *lp, void __iomem *cregs)
{
/* Clear IRQ mask. */
@@ -171,10 +174,11 @@ static int myri_do_handshake(struct myri_eth *mp)
static int __devinit myri_load_lanai(struct myri_eth *mp)
{
+ const struct firmware *fw;
struct net_device *dev = mp->dev;
struct myri_shmem __iomem *shmem = mp->shmem;
void __iomem *rptr;
- int i;
+ int i, lanai4_data_size;
myri_disable_irq(mp->lregs, mp->cregs);
myri_reset_on(mp->cregs);
@@ -186,13 +190,27 @@ static int __devinit myri_load_lanai(struct myri_eth *mp)
if (mp->eeprom.cpuvers >= CPUVERS_3_0)
sbus_writel(mp->eeprom.cval, mp->lregs + LANAI_CVAL);
+ i = request_firmware(&fw, FWNAME, &mp->myri_op->dev);
+ if (i) {
+ printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+ FWNAME, i);
+ return i;
+ }
+ if (fw->size < 2) {
+ printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
+ fw->size, FWNAME);
+ release_firmware(fw);
+ return -EINVAL;
+ }
+ lanai4_data_size = fw->data[0] << 8 | fw->data[1];
+
/* Load executable code. */
- for (i = 0; i < sizeof(lanai4_code); i++)
- sbus_writeb(lanai4_code[i], rptr + (lanai4_code_off * 2) + i);
+ for (i = 2; i < fw->size; i++)
+ sbus_writeb(fw->data[i], rptr++);
/* Load data segment. */
- for (i = 0; i < sizeof(lanai4_data); i++)
- sbus_writeb(lanai4_data[i], rptr + (lanai4_data_off * 2) + i);
+ for (i = 0; i < lanai4_data_size; i++)
+ sbus_writeb(0, rptr++);
/* Set device address. */
sbus_writeb(0, &shmem->addr[0]);
@@ -228,6 +246,7 @@ static int __devinit myri_load_lanai(struct myri_eth *mp)
if (mp->eeprom.cpuvers == CPUVERS_4_0)
sbus_writel(0, mp->lregs + LANAI_VERS);
+ release_firmware(fw);
return i;
}
@@ -1078,7 +1097,10 @@ static int __devinit myri_sbus_probe(struct of_device *op, const struct of_devic
/* Load code onto the LANai. */
DET(("Loading LANAI firmware\n"));
- myri_load_lanai(mp);
+ if (myri_load_lanai(mp)) {
+ printk(KERN_ERR "MyriCOM: Cannot Load LANAI firmware.\n");
+ goto err_free_irq;
+ }
if (register_netdev(dev)) {
printk("MyriCOM: Cannot register device.\n");
@@ -1159,3 +1181,4 @@ module_init(myri_sbus_init);
module_exit(myri_sbus_exit);
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FWNAME);
diff --git a/firmware/Makefile b/firmware/Makefile
index baf5ae4..e6c0fd1 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -40,6 +40,7 @@ fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
e100/d102e_ucode.bin
+fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 3814d7d..1b340c1 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -543,3 +543,13 @@ Licence: Allegedly GPL, but no source visible. Marked:
Found in hex form in kernel source.
--------------------------------------------------------------------------
+
+Driver: MYRI_SBUS - MyriCOM Gigabit Ethernet
+
+File: myricom/lanai.bin
+
+Licence: Unknown
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 2+ messages in thread