mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: the arch/x86 maintainers <x86@kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Xen-devel <xen-devel@lists.xensource.com>,
	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Subject: [PATCH 6/8] x86: use flush_tlb_others to implement flush_tlb_all
Date: Thu,  7 May 2009 13:25:00 -0700	[thread overview]
Message-ID: <1241727902-3176-7-git-send-email-jeremy@goop.org> (raw)
In-Reply-To: <1241727902-3176-1-git-send-email-jeremy@goop.org>

From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Use the flush_tlb_others() call to implement flush_tlb_all().  This is
useful because flush_tlb_others() already goes via paravirt_ops, and so
will be properly paravirtualized.  This needs a small extension of the
extension to the existing native_flush_tlb_others: the global flush is
indicated by setting the "mm" parameter to NULL, so that kernel mappings
are also flushed.

(Nothing similar is required for xen_flush_tlb_others, as we don't use
global mappings in a guest-visible way under Xen.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/tlb.c  |   29 ++++++++++++++++++-----------
 arch/x86/xen/mmu.c |    7 +++++++
 2 files changed, 25 insertions(+), 11 deletions(-)

diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 821e970..e69bdad 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -147,13 +147,25 @@ void smp_invalidate_interrupt(struct pt_regs *regs)
 		 * BUG();
 		 */
 
-	if (f->flush_mm == percpu_read(cpu_tlbstate.active_mm)) {
-		if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
+	if (f->flush_mm == NULL ||
+	    f->flush_mm == percpu_read(cpu_tlbstate.active_mm)) {
+		int tlbstate = percpu_read(cpu_tlbstate.state);
+
+		/* 
+		 * flush_mm == NULL means flush everything, including
+		 * global tlbs, which will only happen when flushing
+		 * kernel mappings. 
+		 */
+		if (f->flush_mm == NULL)
+			__flush_tlb_all();
+		else if (tlbstate == TLBSTATE_OK) {
 			if (f->flush_va == TLB_FLUSH_ALL)
 				local_flush_tlb();
 			else
 				__flush_tlb_one(f->flush_va);
-		} else
+		}
+
+		if (tlbstate == TLBSTATE_LAZY)
 			leave_mm(cpu);
 	}
 out:
@@ -275,16 +287,11 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
 	preempt_enable();
 }
 
-static void do_flush_tlb_all(void *info)
+void flush_tlb_all(void)
 {
-	unsigned long cpu = smp_processor_id();
+	flush_tlb_others(cpu_online_mask, NULL, TLB_FLUSH_ALL);
 
 	__flush_tlb_all();
 	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
-		leave_mm(cpu);
-}
-
-void flush_tlb_all(void)
-{
-	on_each_cpu(do_flush_tlb_all, NULL, 1);
+		leave_mm(smp_processor_id());
 }
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 5af62d8..0e13477 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1284,6 +1284,13 @@ static void xen_flush_tlb_single(unsigned long addr)
 	preempt_enable();
 }
 
+/* 
+ * Flush tlb on other cpus.  Xen can do this via a single hypercall
+ * rather than explicit IPIs, which has the nice property of avoiding
+ * any cpus which don't actually have dirty tlbs.  Unfortunately it
+ * doesn't give us an opportunity to kick out cpus which are in lazy
+ * tlb state, so we may end up reflushing some cpus unnecessarily.
+ */
 static void xen_flush_tlb_others(const struct cpumask *cpus,
 				 struct mm_struct *mm, unsigned long va)
 {
-- 
1.6.0.6


  parent reply	other threads:[~2009-05-08  0:33 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-07 20:24 [GIT PULL] Xen core updates Jeremy Fitzhardinge
2009-05-07 20:24 ` [PATCH 1/8] xen/x86-64: fix breakpoints and hardware watchpoints Jeremy Fitzhardinge
2009-05-07 20:24 ` [PATCH 2/8] xen/x86-64: clean up warnings about IST-using traps Jeremy Fitzhardinge
2009-05-07 20:24 ` [PATCH 3/8] xen: cache cr0 value to avoid trap'n'emulate for read_cr0 Jeremy Fitzhardinge
2009-05-07 20:24 ` [PATCH 4/8] xen: deal with NMI's use of IST too Jeremy Fitzhardinge
2009-05-07 20:24 ` [PATCH 5/8] xen/i386: make sure initial VGA/ISA mappings are not overridden Jeremy Fitzhardinge
2009-05-08 10:57   ` Ingo Molnar
2009-05-08 15:08     ` Jeremy Fitzhardinge
2009-05-07 20:25 ` Jeremy Fitzhardinge [this message]
2009-05-08 15:24   ` [PATCH 6/8] x86: use flush_tlb_others to implement flush_tlb_all Ian Campbell
2009-05-08 15:49     ` Jeremy Fitzhardinge
2009-05-08 15:52       ` Ian Campbell
2009-05-11 13:09         ` [tip:x86/xen] x86: use flush_tlb_others to implement flush_tlb_all, fix tip-bot for Ian Campbell
2009-05-11 13:12           ` Ingo Molnar
2009-05-11 15:00             ` Ian Campbell
2009-05-11 15:11               ` Ingo Molnar
2009-05-11 15:39                 ` Ian Campbell
2009-05-11 15:42                   ` Ingo Molnar
2009-05-11 15:59                     ` Ian Campbell
2009-05-11 15:40                 ` Ingo Molnar
2009-05-11 15:06         ` tip-bot for Ian Campbell
2009-05-07 20:25 ` [PATCH 7/8] xen/i386: reserve Xen pagetables Jeremy Fitzhardinge
2009-05-07 20:25 ` [PATCH 8/8] xen: reserve Xen start_info rather than e820 reserving Jeremy Fitzhardinge

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1241727902-3176-7-git-send-email-jeremy@goop.org \
    --to=jeremy@goop.org \
    --cc=jeremy.fitzhardinge@citrix.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=x86@kernel.org \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®