* [PATCH v4 0/1] Add Ufispace NCPLite platform device tree @ 2023-02-10 10:38 Jordan Chang 2023-02-10 10:38 ` [PATCH v4 1/1] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC Jordan Chang 0 siblings, 1 reply; 4+ messages in thread From: Jordan Chang @ 2023-02-10 10:38 UTC (permalink / raw) To: linux-arm-kernel, linux-aspeed, linux-kernel, devicetree, krzysztof.kozlowski+dt, joel, andrew, robh+dt Cc: jay.tc.lin, eason.ys.huang Add Ufispace NCPLite platform device tree, and add the compatible string in dt-bindings files. Changes for v4: - revise the tags Changes for v3: - add "Acked-by: Krzysztof Kozlowski" Changes for v2: - modify node name to generic one and check with dtbs_check - send-email without confidential mode Jordan Chang (1): ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC arch/arm/boot/dts/Makefile | 1 + .../boot/dts/aspeed-bmc-ufispace-ncplite.dts | 359 ++++++++++++++++++ 2 files changed, 360 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts -- 2.39.0 ^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v4 1/1] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC 2023-02-10 10:38 [PATCH v4 0/1] Add Ufispace NCPLite platform device tree Jordan Chang @ 2023-02-10 10:38 ` Jordan Chang 2023-02-13 1:55 ` Andrew Jeffery 0 siblings, 1 reply; 4+ messages in thread From: Jordan Chang @ 2023-02-10 10:38 UTC (permalink / raw) To: linux-arm-kernel, linux-aspeed, linux-kernel, devicetree, krzysztof.kozlowski+dt, joel, andrew, robh+dt Cc: jay.tc.lin, eason.ys.huang Add initial version of device tree for Ufispace NCPLite platform which is equipped with AST2600-based BMC. Signed-off-by: Jordan Chang <jordan.chang@ufispace.com> --- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/aspeed-bmc-ufispace-ncplite.dts | 359 ++++++++++++++++++ 2 files changed, 360 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2ee9c043218b..d26e0651e805 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1626,6 +1626,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-inventec-transformers.dtb \ aspeed-bmc-tyan-s7106.dtb \ aspeed-bmc-tyan-s8036.dtb \ + aspeed-bmc-ufispace-ncplite.dtb \ aspeed-bmc-vegman-n110.dtb \ aspeed-bmc-vegman-rx20.dtb \ aspeed-bmc-vegman-sx20.dtb diff --git a/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts new file mode 100644 index 000000000000..a3853bdcae9d --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright (c) 2022 Ufispace Co., Ltd. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Ufispace NCPLite BMC"; + compatible = "ufispace,ncplite-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + event-fan-alert { + label = "fan-alert"; + gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(M, 2)>; + }; + + event-allpwr-good { + label = "allpwr-good"; + gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>; + linux,code = <ASPEED_GPIO(V, 4)>; + }; + + event-psu0-alert { + label = "psu0-alert"; + gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(V, 1)>; + }; + + event-psu1-alert { + label = "psu1-alert"; + gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(V, 2)>; + }; + + event-thermal-alert { + label = "thermal-alert"; + gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(P, 2)>; + }; + + event-cpu-caterr { + label = "cpu-caterr"; + gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(N, 3)>; + }; + + event-cpu-thermtrip { + label = "cpu-thermtrip"; + gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(V, 5)>; + }; + + event-psu0-presence { + label = "psu0-presence"; + gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 6)>; + }; + + event-psu1-presence { + label = "psu1-presence"; + gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 7)>; + }; + + event-psu0-power-ok { + label = "psu0-power-ok"; + gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>; + linux,code = <ASPEED_GPIO(M, 4)>; + }; + + event-psu1-power-ok { + label = "psu1-power-ok"; + gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>; + linux,code = <ASPEED_GPIO(M, 5)>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + event-fan0-presence { + label = "fan0-presence"; + gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>; + linux,code = <2>; + }; + + event-fan1-presence { + label = "fan1-presence"; + gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + event-fan2-presence { + label = "fan2-presence"; + gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>; + linux,code = <10>; + }; + + event-fan3-presence { + label = "fan3-presence"; + gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>; + linux,code = <14>; + }; + }; +}; + +&mac2 { + status = "okay"; + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64-alt.dtsi" + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +&lpc_reset { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&wdt1 { + status = "okay"; +}; + +&wdt2 { + status = "okay"; +}; + +&peci0 { + status = "okay"; +}; + +&udc { + status = "okay"; +}; + +&adc0 { + vref = <2500>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + vref = <2500>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "national,lm75"; + reg = <0x49>; + }; + + temperature-sensor@4c { + compatible = "national,lm86"; + reg = <0x4c>; + }; +}; + +&i2c2 { + status = "okay"; + + temperature-sensor@4f { + cpmpatible = "national,lm75"; + reg = <0x4f>; + }; + + fan_ioexp: i2c-expander@20 { + compatible = "nxp,pca9535"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "","","presence-fan0","", + "","","presence-fan1","", + "","","presence-fan2","", + "","","presence-fan3",""; + }; +}; + +&i2c3 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + pagesize = <64>; + }; +}; + +&i2c4 { + status = "okay"; + + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <1>; + }; +}; + +&i2c5 { + status = "okay"; + + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <1>; + }; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; + + temperature-sensor@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; +}; + +&gpio0 { + status = "okay"; + + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "CPU_PWRGD","","","power-button","host0-ready","","presence-ps0","presence-ps1", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","reset-button","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "power-chassis-control0","power-chassis-control1","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","power-chassis-good","","",""; +}; -- 2.39.0 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v4 1/1] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC 2023-02-10 10:38 ` [PATCH v4 1/1] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC Jordan Chang @ 2023-02-13 1:55 ` Andrew Jeffery 2023-02-13 7:21 ` Jordan Chang 0 siblings, 1 reply; 4+ messages in thread From: Andrew Jeffery @ 2023-02-13 1:55 UTC (permalink / raw) To: Jordan Chang, linux-arm-kernel, linux-aspeed, linux-kernel, devicetree, Krzysztof Kozlowski, Joel Stanley, Rob Herring Cc: jay.tc.lin, eason.ys.huang On Fri, 10 Feb 2023, at 21:08, Jordan Chang wrote: > Add initial version of device tree for Ufispace NCPLite platform > which is equipped with AST2600-based BMC. > > Signed-off-by: Jordan Chang <jordan.chang@ufispace.com> > --- > arch/arm/boot/dts/Makefile | 1 + > .../boot/dts/aspeed-bmc-ufispace-ncplite.dts | 359 ++++++++++++++++++ > 2 files changed, 360 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 2ee9c043218b..d26e0651e805 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -1626,6 +1626,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > aspeed-bmc-inventec-transformers.dtb \ > aspeed-bmc-tyan-s7106.dtb \ > aspeed-bmc-tyan-s8036.dtb \ > + aspeed-bmc-ufispace-ncplite.dtb \ > aspeed-bmc-vegman-n110.dtb \ > aspeed-bmc-vegman-rx20.dtb \ > aspeed-bmc-vegman-sx20.dtb > diff --git a/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts > b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts > new file mode 100644 > index 000000000000..a3853bdcae9d > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts > @@ -0,0 +1,359 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +// Copyright (c) 2022 Ufispace Co., Ltd. > +/dts-v1/; > + > +#include "aspeed-g6.dtsi" > +#include <dt-bindings/i2c/i2c.h> > +#include <dt-bindings/gpio/aspeed-gpio.h> > + > +/ { > + model = "Ufispace NCPLite BMC"; > + compatible = "ufispace,ncplite-bmc", "aspeed,ast2600"; > + > + aliases { > + serial4 = &uart5; > + }; > + > + chosen { > + stdout-path = &uart5; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x80000000 0x80000000>; > + }; > + > + iio-hwmon { > + compatible = "iio-hwmon"; > + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, > + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, > + <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, > + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + event-fan-alert { > + label = "fan-alert"; > + gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(M, 2)>; > + }; > + > + event-allpwr-good { > + label = "allpwr-good"; > + gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>; > + linux,code = <ASPEED_GPIO(V, 4)>; > + }; > + > + event-psu0-alert { > + label = "psu0-alert"; > + gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(V, 1)>; > + }; > + > + event-psu1-alert { > + label = "psu1-alert"; > + gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(V, 2)>; > + }; > + > + event-thermal-alert { > + label = "thermal-alert"; > + gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(P, 2)>; > + }; > + > + event-cpu-caterr { > + label = "cpu-caterr"; > + gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(N, 3)>; > + }; > + > + event-cpu-thermtrip { > + label = "cpu-thermtrip"; > + gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(V, 5)>; > + }; > + > + event-psu0-presence { > + label = "psu0-presence"; > + gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(F, 6)>; > + }; > + > + event-psu1-presence { > + label = "psu1-presence"; > + gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>; > + linux,code = <ASPEED_GPIO(F, 7)>; > + }; > + > + event-psu0-power-ok { > + label = "psu0-power-ok"; > + gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>; > + linux,code = <ASPEED_GPIO(M, 4)>; > + }; > + > + event-psu1-power-ok { > + label = "psu1-power-ok"; > + gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>; > + linux,code = <ASPEED_GPIO(M, 5)>; > + }; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + #address-cells = <1>; > + #size-cells = <0>; > + poll-interval = <1000>; > + > + event-fan0-presence { > + label = "fan0-presence"; > + gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>; > + linux,code = <2>; > + }; > + > + event-fan1-presence { > + label = "fan1-presence"; > + gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>; > + linux,code = <6>; > + }; > + > + event-fan2-presence { > + label = "fan2-presence"; > + gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>; > + linux,code = <10>; > + }; > + > + event-fan3-presence { > + label = "fan3-presence"; > + gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>; > + linux,code = <14>; > + }; > + }; > +}; > + > +&mac2 { > + status = "okay"; > + use-ncsi; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rmii3_default>; > + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, > + <&syscon ASPEED_CLK_MAC3RCLK>; > + clock-names = "MACCLK", "RCLK"; > +}; > + > +&fmc { > + status = "okay"; > + flash@0 { > + status = "okay"; > + m25p,fast-read; > + label = "bmc"; > + spi-max-frequency = <50000000>; > +#include "openbmc-flash-layout-64.dtsi" > + }; > + > + flash@1 { > + status = "okay"; > + m25p,fast-read; > + label = "alt-bmc"; > + spi-max-frequency = <50000000>; > +#include "openbmc-flash-layout-64-alt.dtsi" > + }; > +}; > + > +&uart1 { > + status = "okay"; > +}; > + > +&uart4 { > + status = "okay"; > +}; > + > +&uart5 { > + status = "okay"; > +}; > + > +&kcs3 { > + status = "okay"; > + aspeed,lpc-io-reg = <0xca2>; > +}; > + > +&lpc_reset { > + status = "okay"; > +}; > + > +&lpc_ctrl { > + status = "okay"; > +}; > + > +&uart_routing { > + status = "okay"; > +}; > + > +&wdt1 { > + status = "okay"; > +}; > + > +&wdt2 { > + status = "okay"; > +}; > + > +&peci0 { > + status = "okay"; > +}; > + > +&udc { > + status = "okay"; > +}; > + > +&adc0 { > + vref = <2500>; > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default > + &pinctrl_adc2_default &pinctrl_adc3_default > + &pinctrl_adc4_default &pinctrl_adc5_default > + &pinctrl_adc6_default &pinctrl_adc7_default>; > +}; > + > +&adc1 { > + vref = <2500>; > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default > + &pinctrl_adc10_default &pinctrl_adc11_default > + &pinctrl_adc12_default &pinctrl_adc13_default > + &pinctrl_adc14_default &pinctrl_adc15_default>; > +}; > + > +&i2c0 { > + status = "okay"; > +}; > + > +&i2c1 { > + status = "okay"; > + > + temperature-sensor@48 { > + compatible = "national,lm75"; > + reg = <0x48>; > + }; > + > + temperature-sensor@49 { > + compatible = "national,lm75"; > + reg = <0x49>; > + }; > + > + temperature-sensor@4c { > + compatible = "national,lm86"; > + reg = <0x4c>; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > + > + temperature-sensor@4f { > + cpmpatible = "national,lm75"; s/cpmp/comp/ Otherwise: Reviewed-by: Andrew Jeffery <andrew@aj.id.au> ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v4 1/1] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC 2023-02-13 1:55 ` Andrew Jeffery @ 2023-02-13 7:21 ` Jordan Chang 0 siblings, 0 replies; 4+ messages in thread From: Jordan Chang @ 2023-02-13 7:21 UTC (permalink / raw) To: Andrew Jeffery Cc: linux-arm-kernel, linux-aspeed, linux-kernel, devicetree, Krzysztof Kozlowski, Joel Stanley, Rob Herring, jay.tc.lin, eason.ys.huang Hi Andrew, Thank you for taking time to review. On Mon, Feb 13, 2023 at 9:56 AM Andrew Jeffery <andrew@aj.id.au> wrote: > > + > > + temperature-sensor@4f { > > + cpmpatible = "national,lm75"; > > s/cpmp/comp/ Will revise the typo. Best regards, Jordan Chang ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-02-13 7:21 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2023-02-10 10:38 [PATCH v4 0/1] Add Ufispace NCPLite platform device tree Jordan Chang 2023-02-10 10:38 ` [PATCH v4 1/1] ARM: dts: aspeed: Add device tree for Ufispace NCPLite BMC Jordan Chang 2023-02-13 1:55 ` Andrew Jeffery 2023-02-13 7:21 ` Jordan Chang
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®