From: Mike Frysinger <vapier@gentoo.org>
To: linux-kernel@vger.kernel.org
Cc: uclinux-dist-devel@blackfin.uclinux.org
Subject: [PATCH 04/17] Blackfin: convert asm/ioctls.h to asm-generic/ioctls.h
Date: Sun, 14 Jun 2009 08:01:05 -0400 [thread overview]
Message-ID: <1244980878-2124-5-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1244980878-2124-1-git-send-email-vapier@gentoo.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
arch/blackfin/include/asm/ioctls.h | 84 +-----------------------------------
1 files changed, 2 insertions(+), 82 deletions(-)
diff --git a/arch/blackfin/include/asm/ioctls.h b/arch/blackfin/include/asm/ioctls.h
index 895e317..eca8d75 100644
--- a/arch/blackfin/include/asm/ioctls.h
+++ b/arch/blackfin/include/asm/ioctls.h
@@ -1,87 +1,7 @@
#ifndef __ARCH_BFIN_IOCTLS_H__
#define __ARCH_BFIN_IOCTLS_H__
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T', 0x2A, struct termios2)
-#define TCSETS2 _IOW('T', 0x2B, struct termios2)
-#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
-#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
-/* Get Pty Number (of pty-mux device) */
-#define TIOCGPTN _IOR('T', 0x30, unsigned int)
-#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-
#define FIOQSIZE 0x545E
+#include <asm-generic/ioctls.h>
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-#endif /* __ARCH_BFIN_IOCTLS_H__ */
+#endif
--
1.6.3.1
next prev parent reply other threads:[~2009-06-14 12:02 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-14 12:01 [PATCH 00/17] Blackfin arch conversion to asm-generic Mike Frysinger
2009-06-14 12:01 ` [PATCH 01/17] Blackfin: use common test_bit() rather than __test_bit() Mike Frysinger
2009-06-14 12:01 ` [PATCH 02/17] Blackfin: pull in asm/io.h in ksyms for prototypes Mike Frysinger
2009-06-14 12:01 ` [PATCH 03/17] Blackfin: only build irqpanic.c when needed Mike Frysinger
2009-06-14 12:01 ` Mike Frysinger [this message]
2009-06-14 12:01 ` [PATCH 05/17] Blackfin: convert to generic checksum code Mike Frysinger
2009-06-15 11:04 ` Arnd Bergmann
2009-06-16 10:03 ` Mike Frysinger
2009-06-19 1:19 ` Mike Frysinger
2009-06-19 9:05 ` Arnd Bergmann
2009-06-19 10:42 ` Mike Frysinger
2009-06-19 12:33 ` Arnd Bergmann
2009-06-19 13:12 ` Mike Frysinger
2009-06-23 21:14 ` Arnd Bergmann
2009-06-23 21:53 ` Mike Frysinger
2009-06-23 22:06 ` Arnd Bergmann
2009-06-23 22:11 ` Mike Frysinger
2009-09-19 19:08 ` Mike Frysinger
2009-06-14 12:01 ` [PATCH 06/17] Blackfin: convert shm/sysv/ipc to asm-generic Mike Frysinger
2009-06-14 12:01 ` [PATCH 07/17] Blackfin: convert user/elf " Mike Frysinger
2009-06-14 12:01 ` [PATCH 08/17] Blackfin: convert socket/poll " Mike Frysinger
2009-06-14 12:01 ` [PATCH 09/17] Blackfin: convert simple headers " Mike Frysinger
2009-06-14 12:01 ` [PATCH 10/17] Blackfin: convert dma/pci " Mike Frysinger
2009-06-15 11:37 ` Arnd Bergmann
2009-06-16 10:00 ` Mike Frysinger
2009-06-14 12:01 ` [PATCH 11/17] Blackfin: convert termios " Mike Frysinger
2009-06-14 12:01 ` [PATCH 12/17] Blackfin: convert locking primitives " Mike Frysinger
2009-06-14 12:01 ` [PATCH 13/17] Blackfin: convert signal/mmap " Mike Frysinger
2009-06-14 12:01 ` [PATCH 14/17] Blackfin: convert irq/process " Mike Frysinger
2009-06-14 12:01 ` [PATCH 15/17] Blackfin: convert types " Mike Frysinger
2009-06-14 12:01 ` [PATCH 16/17] Blackfin: convert page/tlb " Mike Frysinger
2009-06-14 12:01 ` [PATCH 17/17] Blackfin: convert uaccess " Mike Frysinger
2009-06-15 11:42 ` [PATCH 00/17] Blackfin arch conversion " Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1244980878-2124-5-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®