From: Mike Frysinger <vapier.adi@gmail.com>
To: Arnd Bergmann <arnd@arndb.de>
Cc: linux-kernel@vger.kernel.org, uclinux-dist-devel@blackfin.uclinux.org
Subject: Re: [PATCH 05/17] Blackfin: convert to generic checksum code
Date: Thu, 18 Jun 2009 21:19:41 -0400 [thread overview]
Message-ID: <8bd0f97a0906181819u25df402fxfd535030fd180e87@mail.gmail.com> (raw)
In-Reply-To: <200906151304.16416.arnd@arndb.de>
[-- Attachment #1: Type: text/plain, Size: 905 bytes --]
On Mon, Jun 15, 2009 at 07:04, Arnd Bergmann wrote:
> On Sunday 14 June 2009, Mike Frysinger wrote:
>> The Blackfin port only implemented an optimized version of the
>> csum_tcpudp_nofold function, so convert everything else to the new
>> generic code.
>>
>> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
>
> Have you tested this one well? I was as careful as possible with the
> version I added, but it was basically only tested on microblaze, which
> has a different endianess from blackfin. Some areas of the code may be
> sensitive to this.
i did some tests and it looks like do_csum() is broken :(
here's the input:
do_csum({ 0xff 0xfb 0x01 }, 3)
and here's the output:
Blackfin: 0xfc00
generic: 0xfcff
if i run the two funcs on my x86, i see similar behavior. the
attached csum-test.c contains the csum code from lib/checksum.c and
arch/blackfin/lib/checksum.c and shows the problem.
-mike
[-- Attachment #2: csum-test.c --]
[-- Type: text/x-csrc, Size: 1891 bytes --]
#include <stdio.h>
static inline unsigned short gen_from32to16(unsigned long x)
{
/* add up 16-bit and 16-bit for 16+c bit */
x = (x & 0xffff) + (x >> 16);
/* add up carry.. */
x = (x & 0xffff) + (x >> 16);
return x;
}
static unsigned int gen_do_csum(const unsigned char *buff, int len)
{
int odd, count;
unsigned long result = 0;
if (len <= 0)
goto out;
odd = 1 & (unsigned long) buff;
if (odd) {
result = *buff;
len--;
buff++;
}
count = len >> 1; /* nr of 16-bit words.. */
if (count) {
if (2 & (unsigned long) buff) {
result += *(unsigned short *) buff;
count--;
len -= 2;
buff += 2;
}
count >>= 1; /* nr of 32-bit words.. */
if (count) {
unsigned long carry = 0;
do {
unsigned long w = *(unsigned long *) buff;
count--;
buff += 4;
result += carry;
result += w;
carry = (w > result);
} while (count);
result += carry;
result = (result & 0xffff) + (result >> 16);
}
if (len & 2) {
result += *(unsigned short *) buff;
buff += 2;
}
}
if (len & 1)
result += (*buff << 8);
result = gen_from32to16(result);
if (odd)
result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
out:
return result;
}
static unsigned short bf_do_csum(const unsigned char *buff, int len)
{
register unsigned long sum = 0;
int swappem = 0;
if (1 & (unsigned long)buff) {
sum = *buff << 8;
buff++;
len--;
++swappem;
}
while (len > 1) {
sum += *(unsigned short *)buff;
buff += 2;
len -= 2;
}
if (len > 0)
sum += *buff;
/* Fold 32-bit sum to 16 bits */
while (sum >> 16)
sum = (sum & 0xffff) + (sum >> 16);
if (swappem)
sum = ((sum & 0xff00) >> 8) + ((sum & 0x00ff) << 8);
return sum;
}
int main()
{
unsigned char buf[] = { 0xff, 0xfb, 0x01 };
unsigned short gen = gen_do_csum(buf, 3);
unsigned short bf = bf_do_csum(buf, 3);
printf("%x vs %x\n", gen, bf);
return 0;
}
next prev parent reply other threads:[~2009-06-19 1:20 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-14 12:01 [PATCH 00/17] Blackfin arch conversion to asm-generic Mike Frysinger
2009-06-14 12:01 ` [PATCH 01/17] Blackfin: use common test_bit() rather than __test_bit() Mike Frysinger
2009-06-14 12:01 ` [PATCH 02/17] Blackfin: pull in asm/io.h in ksyms for prototypes Mike Frysinger
2009-06-14 12:01 ` [PATCH 03/17] Blackfin: only build irqpanic.c when needed Mike Frysinger
2009-06-14 12:01 ` [PATCH 04/17] Blackfin: convert asm/ioctls.h to asm-generic/ioctls.h Mike Frysinger
2009-06-14 12:01 ` [PATCH 05/17] Blackfin: convert to generic checksum code Mike Frysinger
2009-06-15 11:04 ` Arnd Bergmann
2009-06-16 10:03 ` Mike Frysinger
2009-06-19 1:19 ` Mike Frysinger [this message]
2009-06-19 9:05 ` Arnd Bergmann
2009-06-19 10:42 ` Mike Frysinger
2009-06-19 12:33 ` Arnd Bergmann
2009-06-19 13:12 ` Mike Frysinger
2009-06-23 21:14 ` Arnd Bergmann
2009-06-23 21:53 ` Mike Frysinger
2009-06-23 22:06 ` Arnd Bergmann
2009-06-23 22:11 ` Mike Frysinger
2009-09-19 19:08 ` Mike Frysinger
2009-06-14 12:01 ` [PATCH 06/17] Blackfin: convert shm/sysv/ipc to asm-generic Mike Frysinger
2009-06-14 12:01 ` [PATCH 07/17] Blackfin: convert user/elf " Mike Frysinger
2009-06-14 12:01 ` [PATCH 08/17] Blackfin: convert socket/poll " Mike Frysinger
2009-06-14 12:01 ` [PATCH 09/17] Blackfin: convert simple headers " Mike Frysinger
2009-06-14 12:01 ` [PATCH 10/17] Blackfin: convert dma/pci " Mike Frysinger
2009-06-15 11:37 ` Arnd Bergmann
2009-06-16 10:00 ` Mike Frysinger
2009-06-14 12:01 ` [PATCH 11/17] Blackfin: convert termios " Mike Frysinger
2009-06-14 12:01 ` [PATCH 12/17] Blackfin: convert locking primitives " Mike Frysinger
2009-06-14 12:01 ` [PATCH 13/17] Blackfin: convert signal/mmap " Mike Frysinger
2009-06-14 12:01 ` [PATCH 14/17] Blackfin: convert irq/process " Mike Frysinger
2009-06-14 12:01 ` [PATCH 15/17] Blackfin: convert types " Mike Frysinger
2009-06-14 12:01 ` [PATCH 16/17] Blackfin: convert page/tlb " Mike Frysinger
2009-06-14 12:01 ` [PATCH 17/17] Blackfin: convert uaccess " Mike Frysinger
2009-06-15 11:42 ` [PATCH 00/17] Blackfin arch conversion " Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8bd0f97a0906181819u25df402fxfd535030fd180e87@mail.gmail.com \
--to=vapier.adi@gmail.com \
--cc=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®